Green house suggestions

[Artstone]

suggestion; I used to work in the nursery industry. A metal frame greenhouse kit with poly-carbonate panels,. they come in different sizes. Put a screw in ground anchor in all corners and one in middle of each wall, for one about 6x6. I would add angle braces in walls for added strength.18"-24" exhaust fan on thermostat, I'm using ac filters in the door for air flow. A little ele. work for lights etc. A basic DIY project. Note; 4x6 starting at $175 on TEMU

Is TEMU a legitimate company, I’ve heard lots of talk about scams , but don’t know if those sources are correct

[shadycon]

I,ve bought a few things from them. No problems. Same stuff as big stores only cheaper.

[Orggrwr]

TEMU itself is legit but I've heard of scams lately where the scammers are pretending to be TEMU or some other online company. So many scams.

[Orggrwr]

Got the cover on today. Come on spring

[dirtymike]

If you didnt get the memo, a older hippie is suppose to go with the green house.

[Artstone]

Can you show what you did to sturdy it up?

[shadycon]

Your plastic needs to be fastened tight along the bottom. Polylocks or PT 2x6 fasten along bottom and hammer tacked every 3-4" with reinforcing tape. Agricultural supply, not Lowes.

[Artstone]

Your plastic needs to be fastened tight along the bottom. Polylocks or PT 2x6 fasten along bottom and hammer tacked every 3-4" with reinforcing tape. Agricultural supply, not Lowes.

Great! Thanks, looking at pics better and your comment I now get it.

[Beeman]

I built a greenhouse out of an old carport tent. Used some welded wire fencing to wrap around it and add the plastic.