What's new
By:
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

Happy Furley New Year.

Mr.furley

Mr.furley

New member
How to clean nutrient/salt off fabric pot.

IMG_20181118_030009.jpg



What you need.
White vinegar
water
brush
tray or sink
5 gallon bucket
gloves.

20181220_210648.jpg


Mix 1 cup of white vinegar for ever 2 cups of water and soak pot in solution.
flip back and forth scrubbing with brush.

20181231_211228.jpg


drain off as much extra solution and ring out pot.
rinse thoroughly and/or soak in clean water to remove the vinegar and let dry, repeat if needed before use.


20181230_225318.jpg


Happy Growing Canna-Family.


​
 
Happy happy Furley!

Great tip for cleaning fabric pots, but how would you clean one that has had colloidal silver dripping into it, or should I just pitch it?
 
Last edited:
Probably would suggest to clean it and set it aside for your next colloidal silver grow plant you do not plan on consuming, @starramus
I can't speak from experience on that one.
 
Handy hint! I expect I'll need it, living in a place where one liter of the tap water can give you 1% of your recommended calcium intake for the day. :silly:

Thanks for the knowledge, and a Happy New Year to you too!
 
Happy New year to you all too! May it bring the best grows yet :)
When I was using smart pots I cleaned them using a very similar method and it worked well.
Once I started getting a salt buildup on the outside of the pots_ shows how well they breathe_ and just used a brush with a weak solution of white vinegar and brushed them off and got rid of it for good.
 
I just turn them inside out and hang them on my clothes line spray with garden hose and leave for up to a month twisting in the wind and rain, Mother Nature’s washing machine 😎
 
Sounds good to me. I'm using plastic buckets now because I have AIT's in the bottoms. I still like the idea of fabric planters but they don't work well with the AIT's. I've been running the AIT's next to plants in planters without them and the ones in the AIT's are consistently a little bit larger, most of the time. So I'm using them now.
 
Yes, its a similar system to the traditional air injection used in hydroponics reservoirs_ even uses the same pumps except they just have porous insulation like stuff that lets the air out but keeps fine particles from clogging up the lines. When the injection is on and the are planters are fully saturated they bubble at the top_ its weird but effective and supper easy to flush. Using a very porous medium works best (there's a drainage hole in the bottom so you can let them drain completely every time you water. Sometimes I don't plug them at all so the roots get to dry just a little. You can also water whenever you want since you can let them drain and then the pumps will keep air moving up through the medium_impossible to overwater. Different but it works for me.
 
Thanks for this Furley! I have a few fabric pots with salt buildup and was wondering how to clean them...don't have a bucket though. Eh, a reason to drop by my grow shop (like I need a reason).

Happy new year everyone! I began the new year having to get a dental crown put on...fun fun.
 
If you have a sink to use then no bucket is need, I don't have running water so I soak them in a bucket after cleaning to remove ( dilute) the vinegar.
 
You must log in or register to reply here.
Back
Top