I had already been researching/buying parts for my LED strip fixtures that will be lighting my 4x4 when I saw a post on the forum that piqued my interest. It was a PC case micro grow. CFLs, soil in a planter that fit inside the case. Due to my current LED project it sparked an idea, why not build an LED strip fixture that fits inside a PC case?
The case.
RAIDMAX Gama PC Case 19.65" tall, 8.7" wide, 20" long. I stripped the inside of the case of all the brackets and lined it with reflective tape. I used a hole saw and cut a hole right in the bottom so I could keep the base of the plant flush with the base of the case. I'm trying to utilize every inch of space possible. The case sits right on top of a 5gal DWC bucket. I have (3) 120mm PC fans, 1 is used as an intake and blows downward over the light and onto the plant, the other 2 are exhaust, I have 1 mounted on the rear and 1 in the front. They're all wired together to an old AC adapter plug I had laying around.
The light.
(5) Bridgelux EB Series Slim Gen 3 LED strips. They're about 13.3" long and about .5" wide. 3000k, (2) 3500k, 4000k, 5000k. I used thermal tape to mount them to heatsinks and mounted the heatsinks to (2) .5" 10 series 80/20 extrusion. The light fixtures height can be adjusted and the light is dimmable. It has an HLG-60H-C700B driver powering it, the driver and the dimmer knob and mounted to the back of the case.
The plant.
Today is Day 15 for this Bloody Skunk Auto from Sweet Seeds. GH Trio, Calimagic, Armor Si, Hydroguard. The plan will be to train her to stay low and to fit the to limited space. I will probably top her in once she grows out a little but more.
Honestly I don't know what to expect. This is basically part of my second grow so I'm still very new to growing but I think I will be able to learn something from this regardless of end result. Don't get me wrong though, I'm aiming for success, specifically I would like to yield 1oz of dry bud. I'm not sure if that's achievable/realistic but that's my goal.
Feel free to ask questions or give me any advice if you have every taken on a micro grow!
The case.
RAIDMAX Gama PC Case 19.65" tall, 8.7" wide, 20" long. I stripped the inside of the case of all the brackets and lined it with reflective tape. I used a hole saw and cut a hole right in the bottom so I could keep the base of the plant flush with the base of the case. I'm trying to utilize every inch of space possible. The case sits right on top of a 5gal DWC bucket. I have (3) 120mm PC fans, 1 is used as an intake and blows downward over the light and onto the plant, the other 2 are exhaust, I have 1 mounted on the rear and 1 in the front. They're all wired together to an old AC adapter plug I had laying around.
The light.
(5) Bridgelux EB Series Slim Gen 3 LED strips. They're about 13.3" long and about .5" wide. 3000k, (2) 3500k, 4000k, 5000k. I used thermal tape to mount them to heatsinks and mounted the heatsinks to (2) .5" 10 series 80/20 extrusion. The light fixtures height can be adjusted and the light is dimmable. It has an HLG-60H-C700B driver powering it, the driver and the dimmer knob and mounted to the back of the case.
The plant.
Today is Day 15 for this Bloody Skunk Auto from Sweet Seeds. GH Trio, Calimagic, Armor Si, Hydroguard. The plan will be to train her to stay low and to fit the to limited space. I will probably top her in once she grows out a little but more.
Honestly I don't know what to expect. This is basically part of my second grow so I'm still very new to growing but I think I will be able to learn something from this regardless of end result. Don't get me wrong though, I'm aiming for success, specifically I would like to yield 1oz of dry bud. I'm not sure if that's achievable/realistic but that's my goal.
Feel free to ask questions or give me any advice if you have every taken on a micro grow!
Comment