Announcement

Collapse
No announcement yet.

CS vs GA3

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    CS vs GA3

    I am using colloidal silver to make a hermie to get seeds from, using CS makes the plant poison, seeds/pollen is good to go. With CS I need to dispose of the soil, the planer, the bud, everything but the seed made from the pollen. (or save the pollen for later use)
    CS will kill your lady bugs, I found out when one of mine landed on a sprayed plant, turned black and died,,,ops.
    I have never used GA3, does it carry the same warning, "throw away all but the seeds/pollen"?
    At my local supply, they have other stuff, I did not look to hard as it was very pricey for a small pouch, and was not for making hermies, clones is what it had in mind. The GA3 (gibberellic acid) seems to have more function for us, from what little I have read about it so far.,, if its safer than CS I would like to give it a try.

    #2
    Rwise I looked into these air injectors (1/4 inch soaker hose) attached to a air compressor .well they worked good until I let them dry out a bit , I did this to all my plants veg,autos, bloom . and everyone had seeds . just a little easier than CS lol
    new grow room built summer of 2017 ,argo max tent for veging ,big kahuna reflector, 1000hps with added leds for the full spectrum . 15th indoor grow ,5 years outside gorilla grows(stealth is the key),veg under t5s growing autos under 300w leds
    current grow https://forum.growweedeasy.com/forum...-new-grow-room

    https://forum.growweedeasy.com/forum...-auto-vs-photo


    https://forum.growweedeasy.com/forum...-week-4-update

    Comment


    • Rwise
      Rwise commented
      Editing a comment
      have a link to more info on these air injectors?

    #3
    "I found out when one of mine landed on a sprayed plant, turned black and died" In my last CS experiment I found a lady bug that had actually turned silver.....kinda pretty! I wish now I had taken a pic.

    GA3 reasonably priced on ebay. https://www.ebay.com/i/173563676358?chn=ps According to this site it is safe to use. http://www.jlhudsonseeds.net/GibberellicAcid.htm

    Comment


    • Rwise
      Rwise commented
      Editing a comment
      Thanx for the links, interesting read, sounds much safer than CS!

    #4
    This is what they sent me its all made out of 1/4 inch tube and connectors 1/4 inch soaker hose cut in 4 5 inch pieces, 3 pieces at 4.5 inches and 2 at 2 inches you will need 5 three way connectors and 1 four way ,

    insert a t connector in a 4.5 piece ,continue this until 3 4.5 pieces with the connectors facing inboard. at the end of the three pieces connect a 2 inch piece with a t fitting facing out board connect the last 2 inch piece then connect a 5 inch piece to all the t fittings facing inboard connect the four with the four way connector , thats it easy I can give you the link to buy them they were like 30 bucks or PM me with your address and I'll send you a couple to use to make seeds I have a ton made up that I'm not using or going to
    new grow room built summer of 2017 ,argo max tent for veging ,big kahuna reflector, 1000hps with added leds for the full spectrum . 15th indoor grow ,5 years outside gorilla grows(stealth is the key),veg under t5s growing autos under 300w leds
    current grow https://forum.growweedeasy.com/forum...-new-grow-room

    https://forum.growweedeasy.com/forum...-auto-vs-photo


    https://forum.growweedeasy.com/forum...-week-4-update

    Comment


    • Rwise
      Rwise commented
      Editing a comment
      Thats an interesting setup, just place it in the bottom and add soil, then apply air, like an air pump for a fish tank? The added air in the soil causes hermies, I would have never guessed!

    • BlueBudz
      BlueBudz commented
      Editing a comment
      Morning oldjarhead100 long time no “see”😂 I would like to know more? I have never heard of this method to get seeds. I remember you setting these up a while ago but I didn’t realize it was for seeds. Please teach us ol’wise One!
      Last edited by BlueBudz; 02-01-2019, 05:05 AM.

    #5
    There are two main methods to create your own feminized cannabis seeds: the colloidal silver spray method or using rodelization.


    scroll down to the section on Rodelization

    Comment


    • Rwise
      Rwise commented
      Editing a comment
      Rodelization is not a for sure method of getting seed, you let the plant age way past harvest time to stress it into being a hermie, definitely not for me. What I am doing is making clones to make seed with, this will not take nearly as long.

    #6
    I think I will be switching to GA3 as with CS I have to dispose of everything it has touched, the soil, the pot, the weed, everything but the seed its self, GA3 sounds to me to be much safer!

    Comment


    • starramus
      starramus commented
      Editing a comment
      From what I have gleaned from this thread looks like you are making the right choice. The CS just looks to have far too many negative side effects. I will be using the GA3 next time. I have added it to my ebay cart.

    • Rwise
      Rwise commented
      Editing a comment
      Yes I want my product as clean from chemicals as is possible. That and it is going to erk me to have to toss pretty though seeded buds, not that it will get big, but,,, I should have balls on the Headbanger in a few days, and the CS is outa here! (dont forget, toss that QT jar too)

    #7
    Shop great deals on Other Hydroponic Supplies. Get outdoors for some landscaping or spruce up your garden! Shop a huge online selection at eBay.com. Fast & Free shipping on many items!

    Comment


      #8
      Thanx for the links BTW,,,

      Comment


        #9
        I have a question on using GA3 to produce hermies, ok I get that you spray it, and I get that it takes about 2 weeks, what I am not seeing is how strong to mix it. Can/do I mix it the same as for soaking seeds to germinate, or what????
        The headbanger clone is making balls, it was done with CS which I do not want to use again. Just to hazardous,,,
        So before my GA3 gets here how the hell do I use it? LOL
        Also I see that some use it to make bigger buds, how is it used there?

        Comment


          #10
          a whole lotta links https://www.google.com/search?client...g+instructions

          Comment


          • Rwise
            Rwise commented
            Editing a comment
            Most I had already explored, I am still just guessing at what strength to mix it for making hermies.

          #11
          GA3 should be here Monday, I am looking forward to some experiments!

          Comment


            #12
            did the air injectors get there
            new grow room built summer of 2017 ,argo max tent for veging ,big kahuna reflector, 1000hps with added leds for the full spectrum . 15th indoor grow ,5 years outside gorilla grows(stealth is the key),veg under t5s growing autos under 300w leds
            current grow https://forum.growweedeasy.com/forum...-new-grow-room

            https://forum.growweedeasy.com/forum...-auto-vs-photo


            https://forum.growweedeasy.com/forum...-week-4-update

            Comment


              #13
              I haven't been to the PO in a few days, need to go but its 12* out with ice on the windshield,,,
              other motivation is there should be money there also,,,

              Comment


                #14
                Yes they are here, thank you! The money however was not,,,,
                Looks like these will fit nicely into a milk crate, we have some Himalaya blue diesel sprouting, soon as one has a limb long enuf to take, I will get this set up!

                Comment


                • oldjarhead100
                  oldjarhead100 commented
                  Editing a comment
                  what money???? I put them in the bottom of my pots and the plants love them until they dry out a little they it stresses them out good luck

                • Rwise
                  Rwise commented
                  Editing a comment
                  Royalties from oil, no I aint rich,,,
                  Ok I will bring in another milk crate and set this up, IF the snowryder clone survives I'll drop that in. If not I can do the Himalaya blue diesel,,, I may have to pick up an air pump,,,,

                #15
                The GA3 is here and those "complete" instructions are well,, not! Not even close, so I am still guessing as to how to use this stuff, should fun!

                oldjarhead100, would it be better for these air injectors to be in old school pots or cloth?

                Comment

                Check out our new growing community forum! (still in beta)

                Subscribe to Weekly Newsletter!

                Working...
                X