furrysparkle This info may help you. I raked it together from various web sites as well as their manual; there are things they need to put in the manual that aren't there. Thing about this vape: it seems to work better the lighter you pack the crucible. Amazing: less weed is more.
BATTERY AND HEAT SETTINGS
Press and hold the Mode Button to display battery level.
Release then press and hold again to display current heat setting(flashing LEDs).
Press the Mode Button repeatedly to cycle through preset temps.
3 green LEDs indicates full
· 1 flashing green LED indicating it’s time to recharge.
· Out of juice: the device will vibrate 3 times with a single flashing red LED.
Overheatingis indicated by vibration and a red warning light.
Wait until it cools down to use again.
Overheating caused by:
LOADING:For dry herb, grind to a coarse consistency and load crucible loosely, level to the top. Fit crucible lid securely, ensuring there are no gaps between the lid and crucible as you close the door.
SWITCHING ON: To activate, press and hold Mode Button until a single green LED shows, then release and the current battery level will be displayed. The unit will wait in Sleep Mode.
PREPARING FOR USE: Extend the mouthpiece by between ½ - ¾". Keep the heat sink inserted all the way.
Triple click the Mode Button to activate Vape Mode,a single green LED will display.
VAPING DRY HERBS: In Vape Mode, press and hold the Vape Button for several seconds, until you feel a long buzz meaning it’s time to vape.Continue to hold the Vape Button and inhale for at least 10 seconds - the longer the draw, the more intense the flavor. Release the Vape Button when done and repeat as desired.
VAPING CONCENTRATES: Select temperature setting for concentrates and when in Vape Mode, press and hold the Vape Button. You will feel a long buzz; immediately begin inhaling and continue until you feel a second long buzz. This prepares the concentrate for use and a single amber LED will be displayed indicating that you are in Concentrate Mode. When ready, press and hold the Vape Button again and immediately inhale for at least 10 seconds, releasing when done. Repeat as desired.
TEMPERATURES: 2 flashing amber LEDs is the default heat setting. To increase vapor intensity select one of the higher presets. For lighter vapor reduce to low, indicated by 1 amber LED. The concentrate preset is indicated by 3 flashing red LEDs and should not be used for herbs.
While the actual number of vapes will very much depend on the way the GHOST MV1 is used, tests have shown that over 100 full length vapes on the highest heat setting can be achieved on a single battery charge. Lower temperatures result in less frequent charging.
SAFETY
Operate only between temperatures of +5°C – +30°C/+41°F - +86°F
BATTERY AND HEAT SETTINGS
Press and hold the Mode Button to display battery level.
Release then press and hold again to display current heat setting(flashing LEDs).
Press the Mode Button repeatedly to cycle through preset temps.
3 green LEDs indicates full
· 1 flashing green LED indicating it’s time to recharge.
· Out of juice: the device will vibrate 3 times with a single flashing red LED.
Overheatingis indicated by vibration and a red warning light.
Wait until it cools down to use again.
Overheating caused by:
- Crucible is too full. Hot air can't move quickly enough through the device and collects under the filling chamber.
- Too slow draws can cause heat to build up underneath the chamber. We recommend to pull a little harder than with most vaporizers: the vapor will be cooled down.
- To speed up the cooling process, remove the battery and crucuble, and leave door open.
- Blowing on the MV1 can also help a quicker cool-down
LOADING:For dry herb, grind to a coarse consistency and load crucible loosely, level to the top. Fit crucible lid securely, ensuring there are no gaps between the lid and crucible as you close the door.
SWITCHING ON: To activate, press and hold Mode Button until a single green LED shows, then release and the current battery level will be displayed. The unit will wait in Sleep Mode.
PREPARING FOR USE: Extend the mouthpiece by between ½ - ¾". Keep the heat sink inserted all the way.
Triple click the Mode Button to activate Vape Mode,a single green LED will display.
VAPING DRY HERBS: In Vape Mode, press and hold the Vape Button for several seconds, until you feel a long buzz meaning it’s time to vape.Continue to hold the Vape Button and inhale for at least 10 seconds - the longer the draw, the more intense the flavor. Release the Vape Button when done and repeat as desired.
VAPING CONCENTRATES: Select temperature setting for concentrates and when in Vape Mode, press and hold the Vape Button. You will feel a long buzz; immediately begin inhaling and continue until you feel a second long buzz. This prepares the concentrate for use and a single amber LED will be displayed indicating that you are in Concentrate Mode. When ready, press and hold the Vape Button again and immediately inhale for at least 10 seconds, releasing when done. Repeat as desired.
TEMPERATURES: 2 flashing amber LEDs is the default heat setting. To increase vapor intensity select one of the higher presets. For lighter vapor reduce to low, indicated by 1 amber LED. The concentrate preset is indicated by 3 flashing red LEDs and should not be used for herbs.
While the actual number of vapes will very much depend on the way the GHOST MV1 is used, tests have shown that over 100 full length vapes on the highest heat setting can be achieved on a single battery charge. Lower temperatures result in less frequent charging.
SAFETY
Operate only between temperatures of +5°C – +30°C/+41°F - +86°F
Comment