Currently involved in two processes; soil and hydro. The soil is ready for the text book photos... the hydro is pretty good but not what I’ve seen here. They are stretchy, have some nice topped growth but also some thin nothing sprouting at the bottoms near the first node. I’m tempted to prune that growth off. It does not seem like it can amount to anything. Switched to 12/12 4 days ago mostly because the soil is ready, hydro...I just want it to go into flower and finish things off. Probably need two grow areas separate from each other in this case.
the hydro had some issues I have not identified properly like a few spots mid leaf in the lower nodes, fine looking from node 2-5. Leaf curl upwards only on the edges...again nodes 2-4. Sparse growth between nodes like maybe 4-5 “ of stem then a node. A few giant fan leaves maybe 9†across at node 2 on 2 separate plants, they shade anything below them but they are node 2 level. I need to find if my trouble is nutes, pH, temp, or lighting. I have made routine pH down adjustment to 5.9-6.1. Using the GH trio with hydro-guard and cal-mag. My LEDs are 1000 w and cover 3 plants each. I know about leaf burn so as a test, since I’m not happy with these, was to measure temp and humidity at the top of the canopy. I get 74.7 and a humidity of 61%. Have 2 21†fans oscillating and try not to direct the flow directly at them .. 1 for hydro, 1 for soil at low speed but still a bit of a breeze.
nutes changed every Week and now measures about 760 ppm and ph of 5.9using a continuous top feed with each in its own 5 gallon bucket with water level at 3 gallon mark, about 1 inch below the net pot. Air stone for each bucket and 3 air stones in the reservoir. During the first 2 weeks I did notice and cleaned, a tan color foam in the 20 gallon reservoir... not sure of what it was but having used protein skimmers in marine aquariums, it must have been some form of dissolved organic material. No smell ever.
Anyone care to offer any opinions. Thanks in advance