What's new
By:
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

Testing PH: meter or drops?

Dagmar

Dagmar

New member
I bought a PH test kit (drops) at the pet store in the aquarium sections but now need to buy more or consider getting a meter. Is there any reason the aquarium tester wouldn't do the job? What does the community think about meters vs. drops? I know the meter is more accurate but it's more expensive and seems like a lot of trouble calibrate, clean, store....
 
I use the drops!. I have a PHstick I bought but never use!. Calibration is a hassle! if you lived here in my town I would give you the store bought meter. I instead got a extra PH drop kit.
 
It is a freaking trouble. In my opinion This is the most inaccurate area of growing weed. Strips and drop will work just fine but you spend more on the long run and don't have much accuracy. Cheap meters are garbage and expensive ones are so expensive and hard to maintain. If you have the resources then get a fancy one (like blue lab). Get all the proper solutions for storage and calibration. And get some strips to double check whenever in doubt. If you don't have the money for all that (I don't) get a not so expensive one (like HM digital or Hanna) and calibrate them as often as you can.
 
I brought a cheap generic PH pen that lasted me for about a year before it went "off slope." Then I brought the cheap Hanna, that lasted less than a year but they're sending me a replacement electrode at least. I found I had to re-calibrate every few months. This is all with proper use, proper solution etc. Pens aren't very reliable in my experience, at least not the cheaper ones. They're also a bit of a hassle. I will say that my mains water PH is pretty consistent so I can guesstimate pretty well. I know around how much Ph down a gallon of my water with nutes needs. When the replacement electrode goes for my cheap Hanna, I'll probably try strips ... haven't tried them yet but they seem the easiest.
 
I am Blue Lab all the way. 9fingerleafs..with him too. Have to have the solutions and keep the pen hydrated per instructions. It will require calibration on a regular basis..not hard to do. Follow instructions. Totally gung-ho for BlueLab..saves a lot of time. Haven't had a pH problem with it yet! And I used the GH drops which I consider unreliable.
:)
 
I use ph paper, works great and it's cheap. Ph being a range if the paper tells me it's about 6.3 or 6.5 I'm good with that.
 
It stands for "potential Hydrogen". the availability of hydrogen atoms to participate in a chemical reaction. The more hydrogen, the more alkaline or basic a solution, the less hydrogen, the more acidic the solution.
 
When you get down to it I like the pen not a big deal to cal.easy to use,I had to get some calibration juice 7.0 to test now and than other than that no biggie.lol
 
No Title

Im lazy. I just use the GH drops. Calibration?
 

Attachments

  • photo8896.png
    photo8896.png
    115.8 KB · Views: 2
Sorry, I did not 'catch the drift', sometimes I am fairly dense. But ,you are welcome. I think,......what was the question again? (lol)
 
I just learned something. I didn't know what PH stood for - only that it was important in what we do here. Cool! Thanks.
 
It's one of the most important parts of what we do and, you're right, it is a really hassle. But the expense is what gives me pause on purchasing a meter. Thanks.
 
You must log in or register to reply here.
Back
Top