What's new
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

She’s too tall for the tent

Newguy36

New member
So... I’m sure someone has run into this issue before. This is my first time growing and My plant is growing up too close to the grow lights. I am in week 3 of flower growing in a 3x3x5.75 ft tent with a 300 watt led full spectrum grow light. I had to delay flowering because I went to Cuba and didn’t want the first or second week of flower to be under someone else’s care. So I just let it continue to veg. This has proven to be a mistake as she has now doubled in size and I can’t raise my light much higher.

I have now moved my light to the edge of the tent as high as it can go and angled it towards the plant. She seems to be doing well and the lower buds are really enjoying the new additional light. However it is a pain in the neck because I’m rotating the plants every two hours or so to keep all sides getting light.

does anyone have a solution besides bending it? I am thinking of moving it to a walk in closet. I will still be able to get a fan on it but no ventilation or carbon filter will be possible.

thanks in advance.

6E725D14-FDF6-49FE-BA57-483502EE936F.jpeg
7F84A60A-03F1-4E7C-9914-97EC9693BA36.jpeg
54A5B313-0F62-44D9-BA8F-FB60D32CA074.jpeg
514A0622-26F1-4DC4-B76A-3C005CB6F2C3.png
0286BEF3-FF10-4205-AD52-883B06021E18.jpeg
 

Attachments

  • 6E725D14-FDF6-49FE-BA57-483502EE936F.jpeg
    6E725D14-FDF6-49FE-BA57-483502EE936F.jpeg
    2 MB · Views: 0
  • 6E725D14-FDF6-49FE-BA57-483502EE936F.jpeg
    6E725D14-FDF6-49FE-BA57-483502EE936F.jpeg
    2 MB · Views: 1
  • 6E725D14-FDF6-49FE-BA57-483502EE936F.jpeg
    6E725D14-FDF6-49FE-BA57-483502EE936F.jpeg
    2 MB · Views: 0
  • 7F84A60A-03F1-4E7C-9914-97EC9693BA36.jpeg
    7F84A60A-03F1-4E7C-9914-97EC9693BA36.jpeg
    2.7 MB · Views: 0
  • 54A5B313-0F62-44D9-BA8F-FB60D32CA074.jpeg
    54A5B313-0F62-44D9-BA8F-FB60D32CA074.jpeg
    3.4 MB · Views: 0
  • 514A0622-26F1-4DC4-B76A-3C005CB6F2C3.png
    514A0622-26F1-4DC4-B76A-3C005CB6F2C3.png
    1.2 MB · Views: 0
  • 0286BEF3-FF10-4205-AD52-883B06021E18.jpeg
    0286BEF3-FF10-4205-AD52-883B06021E18.jpeg
    2.4 MB · Views: 0
Your best solution at this point would be some LST to bend the girl over. Attach a cord to let you pull the top of the plant over-it will fold over quite a bit before the stem cracks.
The other option(which is what I would do) is a HST bend on the main stem at the lowest point that the stem is still pliable. Not ideal to do in flower but I think that you'll ultimately get a better yield by having a flatter canopy. That will maximize what your light can do.
 
What MrFurley said .Supercrop.
I don't believe she's gonna get much taller, you could get another light for the other end of your tent, if you dont supercrop.
 
I would do the supercrop at the very least LST would be great also if your not comfortable squeezing the stalk to soften the tissues so you can bend it.
 
Here is one I supercropped. If you enlarge the second pic you can see how the buds turned upwards and became many fat buds. But the first pic is what the stem should look like after a few days of bending it.

image_88647.jpg
image_88648.jpg
 
Thanks for all your responses.
this is my first time growing anything so I really didn’t want to get into training. I found this seed in some flower I bought and things just spiralled from there.
i didn’t even top this plant. as a newbie I was just happy I was keeping it alive. I wish i had topped it a couple of times and I wouldn’t even have this issue. I also did not anticipate the stretch of a foot when switching the light schedule.

you guys haven’t steered me wrong yet. The nutes I bought have already made a huge difference.

im likely going to Try and bend it down LST ... here’s a stupid question. Which way do you bend it.? Find the side with the least amount of buds and bend it slowly ove that way??

thanks again.
 
hey Newguy36 , i was in same predicament last week..couple of stems on one girl were stretching up out of canopy so i took the advice of oldjarhead100 , Rwise SoOrbudgal SirSmksAlot , Drekthar D.A.A.S.69 RagWeedDWC and quirk ..Thanks everyone! I supercropped the 3 stems.. and it worked perfectly..I would try Mr.furley suggestion and bend that main stem just above the group of buds. That should give you another 5-6 inches to lights and also give the lower buds some more direct light. good luck
 

Attachments

  • photo90570.jpg
    photo90570.jpg
    2.2 MB · Views: 0
  • photo90571.jpg
    photo90571.jpg
    1.5 MB · Views: 0
  • photo91034.jpg
    photo91034.jpg
    2.3 MB · Views: 0
  • photo91035.jpg
    photo91035.jpg
    2 MB · Views: 0
  • photo91036.jpg
    photo91036.jpg
    2.6 MB · Views: 0
Not to mention that your plant is probably not done "Stretching" and she may give you another foot so be prepared.
 
So... I’m sure someone has run into this issue before. This is my first time growing and My plant is growing up too close to the grow lights. I am in week 3 of flower growing in a 3x3x5.75 ft tent with a 300 watt led full spectrum grow light. I had to delay flowering because I went to Cuba and didn’t want the first or second week of flower to be under someone else’s care. So I just let it continue to veg. This has proven to be a mistake as she has now doubled in size and I can’t raise my light much higher.

I have now moved my light to the edge of the tent as high as it can go and angled it towards the plant. She seems to be doing well and the lower buds are really enjoying the new additional light. However it is a pain in the neck because I’m rotating the plants every two hours or so to keep all sides getting light.

does anyone have a solution besides bending it? I am thinking of moving it to a walk in closet. I will still be able to get a fan on it but no ventilation or carbon filter will be possible.

thanks in advance.


How's about a new tent? Amazon has a number of 80 inchers. (is that a word?...no) Vivosun is quite the reliable tent manufacturer. Sorry I didn't read through all of the posts so this might be a duplicate solution.
 
Here’s a stoner thought, a display turntable....you could even add some ballerina music that plays like a giant music box. The light will hit all sides....

sorry, just busting chops but the super cropping is really your best bet. Being a big as she is, you may find if you wrap a thick cloth over the jaws of a pair of pliers, you can gently crush the stem around the circumference to soften it not break it and that will help the bend.
there are two training techniques that take no effort: topping and tying and they will increase your yield significantly over the Christmas tree shape.... although, the holiday season is approaching
 
Back
Top