What's new
By:
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

New Grow room

That's pretty freekin cool OJH!! Talk about get some Oxygen to the roots!
Just got a Vivosun air pump like that for making compost tea, so far it seems like a great pump.
 
all 4 of the plants were a inch taller yesterday morning ,I thinks its one of those things that your never sure about until you see a difference

heres the conclusion of the ballast story I'm returning the ballast i Bought, also returning the whole fixture will get store credit for it and I bought a new one because I need two real soon, so before I put it all back together I took the one out of veg tent and took it a part to change one of the ballast on it , took it all apart and damn it had four ballasts ( theirs a chinaman laughing his ass off for fuckin with the american lol) so I cleaned it up put it back together and now have a 6 banger light for veg , as soon as the outdoor plants go in the ground I will swap out the veg light for new t5 fixture

the buds that are drying were down to 43 grams from a hundred so today they should be ready to jar
the wind is blowing so hard its shaking the house ( it was built around 1820 all post and beam)

I also was able to put some twine up so I could use some yoyo's to hold the buds up in the bloom room ,That is one of the things that will make you smile seeing buds get so heavy they cant hold themselves up,

I took a look at the pictures and in the 2nd one on the left side on floor there is what looks to be a cord or hose but neither of them are used in bloom room so its a complete mystery to me lol
 

Attachments

  • photo44510.jpg
    photo44510.jpg
    992.7 KB · Views: 7
  • photo44511.jpg
    photo44511.jpg
    914.3 KB · Views: 4
haha I just think of them as workers like when I was a boss lol . I do have to admit 18 plants in the bloom room was way to much couldn't focus on one plant , I will be going to 6 plant grows after I get these cleand up
 
these are pictures of the air injector plants sorry about the leds I turn the flash on but didn't work the one in normal light is the smallest

My project yesterday was to make a tea maker ,I used to make tea by just stiring it but I got some that was made in a votec tea maker and wow did the plants like it so I decided to make one pretty simple idea was easy to do only had one major problem with it and that was when I went to use it you see you get the lift for the tea by putting air stones into the vertical tubes on maker so you can see it was a major problem my air stone is sitting on top of the pipe just a little to big lol
 

Attachments

  • photo44617.jpg
    photo44617.jpg
    979.2 KB · Views: 7
  • photo44618.jpg
    photo44618.jpg
    892.7 KB · Views: 4
  • photo44619.jpg
    photo44619.jpg
    829.7 KB · Views: 5
  • photo44621.jpg
    photo44621.jpg
    834.1 KB · Views: 3
  • photo44622.jpg
    photo44622.jpg
    873.4 KB · Views: 9
  • photo44623.jpg
    photo44623.jpg
    828.2 KB · Views: 4
OJH did you see my question on your comment on my page, I ask if you’ve glued the PVC pipes together for your build it looks great but it’s supposed to fit together with out glue so you can take it apart to wash it which is very important between uses. If the liquid stays in there even a little bit It can contaminate and go anaerobic
 
I figured I would just run it with clean water I didnt realize it was supposed to fit with out glue until I was buying air stones at HTG oh well , Doesn't it leak though ?
 
well it runs and works great its making terpin tea right now , then I have some stump tea and worn castings i'm in tea making heaven lol

the babies are going to my outdoor grow thread just posted them here with out thinking lol
 

Attachments

  • photo44690.jpg
    photo44690.jpg
    833.8 KB · Views: 3
  • photo44691.jpg
    photo44691.jpg
    888.9 KB · Views: 7
  • photo44692.jpg
    photo44692.jpg
    994.4 KB · Views: 6
Not if it’s fit together properly, if you bought a kit it shouldn’t be hard to replace the pvc parts in a box store get the pvc cutting tool too.
Just running water Won’t be hot enough to kill bacteria that is anaerobic you’ll need a diluted bleach solution. I posted a video on my thread for you. From what I understand AACT made from compost should not be used after being brewed more than 48 hours too.
 
Last edited:
Paracelsus I took a good look at it yesterday and I think if I cut the legs after the lift tube I can put in coupling then every thing else I can get to , I saw a mess after I used the tea and I dumped in 5 gallons of water although I was able to get sides clean couldn't get those bottom tubes clean
 
I know you’ll figure it out. I’m just concerned while working out the kinks you will lose a plant or two.

Out of curiosity did you see the video I posted for you with the top dollar vortex tea brewer. It might give you some ideas about adjusting your design Visually
 
You must log in or register to reply here.
Back
Top