What's new
By:
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

harvest question

r3m1

r3m1

New member
question what is the best way for harvest? don't cut plant and leave in dark for a few days then cut and hang upside down or cut then hang upside down.
 
Depends on how humid your weather is. How many plants are you harvesting and how much time do you have. For high humidity take of branches and leave to dry in rack. For low humidity chop entire plant and hang upside down. Its better to harvest when the soil its dry. Everything else makes very little difference
 
Like 9finger said, a lot of it depends on your humidity and that was all good info. I would like to say though that if you have very low humidity, water day for harvest so buds aren't dry to begin with. High humidity, let soil dry for a couple of days before harvest.
 
well i live in a cold climate as of this time of year (mi). humidity can be controlled from furnace for rest of house, so prob around 50% in the rest of the house where hanging and drying happen its about 50% in room depends on stage.
so im guessing it would be better to just cut either branches or the whole thing?
My father read that leaving it potted for a day or two in dark then cutting down would be better for buds, i beg to defer with him but needed other advise before we harvest last two plants in that room.
 
We have a member here that does that leaves it in the dark 2 days before the harvest. I really don't know if that helps or not.

I like cut off branches hanging upside down, this summer I had to be careful with these really big buds I had to make them smaller for the dry/cure . It works well in my tent with a small fan circulating air
 
I've done the research on this not long ago. It turn out that during night is when resin production occurs. Resin glands are used by the plant as a sunscreen reflecting light. So a long 72 hour period of darkness makes sure the plant is gonna produce as much as it can. Light also degrades resin. Under total darkness thc and other cannabinoid degradation stops. So the tricomes won't keep going amber in that period
 
Yep, what Karlee said. A truly experienced grower here leaves in the dark 2 days before harvest.

r3m1, if your humidity is around 50%, you should do fine with a normal dry. Cut branches and hang. You aim is for the dry to take 4 to 7 days. Don't let them overdry. Watching the humidity during the cure is even more crucial.
 
By clean I pull off fan leaves and trim the leaves with little resin. I do my close trim after dry. If leaves got a shit ton of trics I leave them on the bud to protect it when Ina bag or pocket, I just pull off right when I break up bud to smoke.
 
good shit 9 fingerleafs, we tried a one cut down and one in pot still in total dark for 2 days, see the out come soon. sonnyhad im 15 mins from detroit.
 
my father was a rose Gardner for a while in his young days, has some experience. but i will more then likely be switching to the 2 day complete dark before its cut down. dry is about 4-5 depending on how often furnace kicks on. thanks a lot.
 
Once I jar be sure to check often, if the buds feel wet ,sometimes if humidity is high they rehydrate after 24hrs. If they feel wet I empty the whole jar on a plate , spread around the buds , and give them 12 to 24 hrs to dry, before I put them back in jar. This year was high humidity during drying, I had to empty some jars back out, I even busted the big buds down, I will happily report no mold in jars. Good luk , you will find out what works for your self.
 
No Title

I'm with kingfish
like 60/60
 

Attachments

  • photo5674.JPG
    photo5674.JPG
    250.7 KB · Views: 6
You must log in or register to reply here.
Back
Top