NuggetMan
New member
The Scenario: 2 weeks before harvest and I need to flush, I am using 3 gallon pots. I usually water each plant with 8 cups or 1/2 gallon per plant. I did 1st major flush on Friday the 17th, 2020 using 2-3 gallons of water with flawless finish per plant and brought my ppm's down to around 750-550 depending on the plant.. 4 days later on the 21st my pots are light. Watered with just ph6.4 and molasses at my normal watering amount and noticed my ppm's went right back up over 750 to as high as 1100. 3 days later on the 24th, pots are light, did a second flush using 2-3 gallons depending on the plant and got my ppm's down to as low as 275 and as high as 505. I am trying to stay around 400-500 ppm's. My babies are looking really good and getting close to harvest time at week 10 this Saturday. Since I did this last Friday, I don't think I have to give it any water at all until this week-end and today my pots are still kinda heavy. I think I should be ok??? 9 gallons of water seems like an awful lot for flushing for a 3 gallon pot to get the ppm's down 0-400 ppm range (by my past experience below this I lost aroma and flavor trying to get it clean) so I went by what I normally water at 1/2 gal, I flushed with 2-3 gallons, below 505 ppm's are where I want them to be. Everyone has their own opinions, but I want to know if I'm in the ballpark.