Coco coir, switching to GH trio

[Steverlin]

7 weeks into first grow. In coir, been using PHd bat guano tea and worm casing tea. PH is 6.5 at drain off but 3 of four plants are light green and slow growing. I decided to switch to GH flora trio and Cal Mag to see if I can get them all healthier be for going 12/12. My question is, can I combine all 4 (trio&CalMag) all together in one gallon jugs of water then pH it to apply all at one watering?

 

[Weed Pharma]

You should add each one to the gallon of water and then stir in this order:
Cal/Mag-stir-FloraMicro-stir-Floragro-stir-Florabloom-stir
What are you using for Ph adjustments?

 

[Sammy]

Actually I think the micro should go in first double check though.

 

[St.buds]

Nebulas schedule says always add micro first

 

[Weed Pharma]

NebulaHaze ?

 

[Sonnyhad]

Yeah, don't complicate the hell out of it, just read the directions. I have only done this for a year, but have always added cal mag last. Just as long as you add each one individually to the water after shaking vigorously, I really don't think you can mess up. It's not that complicated. Just make sure you try to ph between 5.8 and 6.0 and have a decent ph meter. I had a 20 dollar one that I found was not very accurate, got a 50 dollar one and it made all the difference in the world, well, along with following along with this for u m. Peace out man.

 

[OzBud]

GH say to add CAliMAGic first, that is if not using Armor Si as that goes first if you are using the two.

 

[OzBud]

I have an email from GH still in my inbox.

They say to add:
1. Armor Si
2. CALiMAGic
3. FloraMicro
4. FloraGro
5. FloraBloom
6+ Any other GH products in ay order

 

[OzBud]

No Title

 

[Weed Pharma]

OzBud, yup that is basic chemistry!

 

[Weed Pharma]

That's why I inquired as to the pH adjustment- I use Protekt (Si) for PhUP and add it before the Cal/Mag.

 

[Tika]

Well...have heard/ read the above to be true however: I add the micro, grow, bloom, CaliMagic, terminator and now bloom to the water, shake a bunch, pH it with , shake again, test with BlueLab pen to 6.0...for my tap water it's around 3 mos of pH down. Shaking/ stiring after each nutrient is added is recommended but I have 16 gals of feed each time for 8 plants so shaking after each addition is over the top for me.