What's new
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

Aquaponics issue

Having problems with my plants I am running a small Aquaponics system my ph is 6.5 my ec is 1.8 and the tds is 860 ppm so everything should be in range but the plants are not doing well . From what I have researched I believe it is a calcium problem , mainly affects new growth yellowing curling of the leafs and wilting of the leaves along with some twisting on newer growth older leaves are still very green but the tips are starting to yellow a little bit . I added a cuttle bone to try to bring up calcium naturally . How soon , if it is a calcium problem , will I see improvement and know I am on right track ? Also the leaves are devoloping spotting on them .
 
[No message]
 

Attachments

  • photo76784.png
    photo76784.png
    911.1 KB · Views: 1
  • photo76785.png
    photo76785.png
    794.3 KB · Views: 2
  • photo76786.png
    photo76786.png
    713.4 KB · Views: 1
  • photo76787.png
    photo76787.png
    617.7 KB · Views: 3
  • photo76788.png
    photo76788.png
    652.5 KB · Views: 2
I don’t want to be a Debbie Downer here but my understanding is that the nutrient requirements of Cannabis will exceed most reasonable Aquaponic systems.
 
When I first added the plants to the system after cycling for 4 weeks they took off growing at about 7 inches a week with a lot of new growth . My water got low and I had to add about 10 gallons and used RO water due to the chloride in our tap water . I know that RO water has none of the minerals needed in it but I had roughly 90 gallons of water in when I added the RO and it was not RO . The water temp is 68F so I just need to figure out the deffiency and enter it the most natural way I can . Just can’t figure out what it is lacking .
 
You are at the top end for the hydro chart
wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==
​ and if you have been running to high on the PH. You could be missing Mn (manganese)
wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==
​
Which is a inmobile nutrient, that would show signs at the top of the Plant(s).

I'm with Obi-Wan about the size of your Tank/pond?
but would consider lowering the PH First and
 
The tank will hold 400 gallons of water but since I am only running 2 grow beds and 4 plants I am only running between 100 & 150 gallons at the moment .
 
hi Technician,

Looking at the pics, I'm not sure that calcium deficiency is the issue...
Calcium is absorbed from pH (almost) 6.0 and up which your aquaponics system clearly was. https://www.growweedeasy.com/ph#hydroponic-soilless-pH

Looking at the chart there, I'm thinking you may have 2 kinds of issues, due to pH being high.

Manganese, as Mr.furley suggested, https://www.growweedeasy.com/manganese-deficiency-cannabis
Or possibly even Phosphorus, https://www.growweedeasy.com/phosphorus-deficiency-cannabis

with you pH having been at the high side of the range 5.5 - 6.5,
I'm of the suggestion of gradually lowering the pH towards the 5.7 side...

That will allow Boron uptake as well, just in case that may be missing as well.

I'd look up a way of lowering pH in a 'fish friendly' manner. (Organic acids?)
 
I find it very important to let the PH move between 5.7 and 6.3, you just have to log it so you can reference it
 
I’m not an aquaponics expert but I listen to podcast that have experts. Check out - “Growing with fishes Podcast”

the first 15 episodes are in depth cultivation with fish.
 
It did not work for me, I have tried different ways for years. Not a true aquaponics setup, but I brought my water up in to a box built along the pond that filtered back into the pond. I have grown lettuce, tomatoes (not well) and peppers. Over the years I have tried pot, with no luck. There is enough in the water to support a huge amount of growth, I have two Fan Tailed Koi and two Fan Tailed goldfish (Big) and a bunch of guppies, mollies, etc. The pond plants have to be harvest twice a year. So its there, just does not work (for me) for pot.
 

Attachments

  • photo76916.jpg
    photo76916.jpg
    139.2 KB · Views: 1
Back
Top