What's new
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

Light question

Cannacaps4U2

New member
Light question

Novice grower here, wanting to upgrade my lights.

My current setup, home built cabinet, 48hx36wx20 deep (inches)

Two 12 volt PC fans (130 mm) for exhaust, I have vents cut into bottom opposite side of the exhaust fans.

I currently have a homemade cfl light setup. 8x40w

I am trying (for the first time) a homemade SCROG 2" squares.

I use 3 gal fabric pots.

I grow Northern Lights photo period, and last two grows I got about 2 oz per plant.


My setup.

a8bBhnavBhby57ULUGwJJIbBneiizy1gjn_YDCuN8ave7T_b_1QjMul3D0G_Q0kAAj0lYAsJrssdtfYLGJdPgpbvQb_MuLjck1HokXITUEVnF-i2cVj_rzBt93kMAMozyNqjBXPS



I have removed the shelf, and replaced with scrog screen.

I have also removed the little heater and replaced it with a 200w chicken coop heater, controlled by a thermostatically controlled outlet.



With my cfl lights I can keep them close to my plants.

I am thinking about an LED Quantum board.

Like this

Horticulture Lighting Group HLG 100 V2 3000K Quantum Board LED Grow Light Veg & Bloom | Version 2 High-Efficiency Upgraded LM301B LED'S


Amazon currently has this for $149.


I have these concerns

how close can i place LED lights to my plants?

How much heat does this add?

Is my cabinet to small?

Do Northern Lights stretch to much when flowering?


What are the recommendations?
 
The HLG 100 is nondimmable. You will probably need a foot and a half or so of space between light and plant. I'll put a reddit link below to a place called space buckets. They turn all kinds of things into growing environments for plants. It's pretty genius. If you show them a picture of your cabinet, I bet they could help you get that cabinet up and running. The main question is, what kind of yields are you wanting? Heavy use? That cabinet isn't big enough.
https://www.reddit.com/r/SpaceBuckets/
 
i can't see how any of these space buckets work with quantum boards.. many have 9 inches to a foot clearence max in late flower it seems.. i guess dimmers or bleached out cola's are abound.
 
Ok so i have decided to go with the hlg 260w
Hlg 260w $229.00

https://horticulturelightinggroup.com/collections/all/products/260w-qb-led-kit

any good reason not to go this way?

That is going to be a bit much for 5 sq ft of canopy. Because of your headroom issues, I'd go with this- https://horticulturelightinggroup.com/collections/all/products/135w-led-board-kit
This board is approx 6% less efficient than the current lm301b QB. I use a 4000k panel in my mother/clone tent 30x20 and they love it.
 
That is going to be a bit much for 5 sq ft of canopy. Because of your headroom issues, I'd go with this- https://horticulturelightinggroup.com/collections/all/products/135w-led-board-kit
This board is approx 6% less efficient than the current lm301b QB. I use a 4000k panel in my mother/clone tent 30x20 and they love it.

Well I do think the 260w may be a bit strong, however with the ability to dim, and the physical size would make this a better fit.

I did consider the 135, but I want to stay with the same watts ± that I currently use.
I have read that you should have 30-50 watts per sqft, with 6 sqft I should have between 180 and 300watts
 
The onboard dimmer on the driver allows his fixture to be dialed back to 135 watts and both fixtures use the 288 V1 boards so they’re both using the same chips.
 
With Quantum boards you will find that you will need 30-40 watts per square foot depending on how they are driven. I would guess that with your chosen fixture and the spread it will provide for your space, you’ll probably be happy around 200-225 watts during flower and about 150 watts for Veg. I’m finishing up a round of flowering right now where I used 275 watts over 8 sq. ft., so about 34 watts per sq. ft.
 
Back
Top