just like that lol

[r3m1]

and just like that 5 plants came down, instead of two i pulled five. and moved over 10 more to flower!

2-LSD
3- Quantuam

had a few unkowns so i added them to flower to make some live resin,

[r3m1]

after harvest i got from two plants 1/2 and from the others and have one last one hanging i got 22 ozs, quantuam came out purple and really good so did the lsd, which i must add from an cup grower in mich he stated " for a 2nd harvest you are pulling stuff 3-4 year growers pull in quality". to be honest i wont complain and keep doing what im doing.

made a few changes to water tanks. only issue i have is finding a solid point to get water to the ro system. i just run into either not enough or its to much and causes leaks and floods ( woke up to 3 inches in my flower room just glad everything is 5 up, bright note its sealed lol).

I am going to pick up a 315w lec this weekend to add to flower room now, until new rooms finished and everything is set up and giving me good reads. I wanna do something that will give an alert to me in my other areas if temps drop or to high but im at a loss on this. ( i dont want high tech, something like a flashing light type inside but instead a buzzer. I plan to have to new room done in the next week or so. at least built and sealed so i can bomb and sensitize the area. one thing that will be nice is some days i will be able to pull the plants outside during the summer as well ( huge plus)

so basically the room size is a 15x12x8. we will be placing 4 new walls up sealed, and inside i am looking at a wall mount a/c / heater type for temp control its a 24000 btu. their will be 8 315 lec lights spaced in room on vmax reflectors open cooled. imagine per 12 plants per 4 lights, but i might add additional 4 down line? i am going to make a drain system for the trays the plants will sit on ( which will be raised off the water that will run under and out). their will also be 4 hurricane fans inside ( if need i will add add fans around lights) i am also going to make a cooling fan system that will cause the air below to circle up and out the 4 vents that i will place in the room to pull heat out the room but i will be causing a negative pres in the room ( best to prevent mold, and powder mildew).

i plan to make a full post on the build!

[oldjarhead100]

r3m1 Im building a new grow room after this bloom cycle is done so I'm interested keep us posted I think I would be concerned about elec. outlets for all the light,fans,meters and such .I'm running 14/2 everywhere so there wont be any danger of overload love to see some picture of the build

[PuravidaC]

Another thing to keep in mind when building new grow room is not to overload electrical circuits. OJH is right about 14/2 wiring but per national electrical code you should not exceed 80% of the breaker size on a circuit (20 amp breaker for a total 16 amps of lights and equipment.) I suspect you guys are not getting a permit for your projects but it is better to be safe than sorry! 😆 Be safe out there and happy growing!!!

[r3m1]

puravidaC, no permits but following code as it is done by a builder by trade. inside i have 3 breakers at 20a ea in play. new room will have own breakers as well. I wont play around with shit that will burn down a house, id rather add extra breakers and be happier

[oldjarhead100]

me to I will have a couple of dedicated breakers in each of the boxes I use ( I have a 2 family so I use my box and the common area box) everything will be code better than it is now