What is your biggest question about growing cannabis?

[DaisyMoore]

Is growing cannabis legal in california?

[Will7]

Your recent article on decarboxylation was terrific. I plan on using mason jars like you say. I am ready to harvest some extremely funky Trainwreck. My question is this. I didn't see if i can do this with fresh buds or do I need to air cure them first? Thanks

[Retodd]

Air cure first for a few days until you can ‘snap’ a branch. Once they’re at that point you trim the buds and jar them. I use 62% cure packs for each container. One pack is good for 1oz. Burp the jars 1-2X a day for the first couple weeks and then you can just burp them once a week. Look up Boveda humidity packs on Amazon.
Good luck✌🏻🙏🏼

[alltatup]

Will7, I'm not sure what article you're referring to, but you can decarb fresh bud, although I recommend that you dry it first. I've decarbed a lot of freshly dried bud for making tincture.

[Chris77474]

I do hav a question. Can I veg under a 200w led then switch to a 315w lec for flower

[Bmw]

How to trim, how far down the branches do I trim? This has been my struggle all 4 years. Thank you

[alltatup]

Hi Beemer: The simple answer is: whatever won't get light, but I don't think there's one answer to that question; depends on strain and other issues like training. I look at a lot of pictures--which helps me to figure out what I want to do, depending on the strain I'm growing. Check out these pics:

https://www.growweedeasy.com/low-stress-training-lst

https://www.growweedeasy.com/defoliation

[MmmHmmml3]

Two quick questions. My seeds sprouted in a germination station after 36 hours and tonight will make 3 days. I will not be home until tonight. When I left around noon 1 seed looked like it's started a second set of leaves and it made two sprouts so I split them up and put into it's own pouch. This one had one small set of leaves. Another was starting a set and I just barely knocked the rest of the shell off. The last one has a really deep taproot (at least 3"), but still has most of the shell on and seems like it will drop by the time I get home.

I have two 20w (each) 2ft t12s roughly 12 inches from them and managed to lower to about 9 or 10 inches this morning. Curious how much closer I should put it? If I set it on top of the germination station lid it will be roughly 2 inches away.

Would it be better to just put the station under this light right now? If so, how far away should this light go?


Second question

2 of 3 are autos (hopefully the double was the auto duck) and curious if I should clone them? I would like to clone them? I have some great spots outside where I can fit many of these, but I know it's tough to do.

My main concern is if trying to clone them will weaken the main plant at all? If there is no risk then I might as well.

[alltatup]

This article will help with the lights question:

https://www.growweedeasy.com/how-far-grow-lights

[MmmHmmml3]

Can anyone recommend good places to order indoor growing supplies in the U.S? I am not so much looking for a list of supplies that would be good, but I want to browse various things. The issue now is if I want an item I just search it on google and find this item. It would be nice to find a well known growing supply company where I can browse various options.

I am also wondering what are some must have insecticides to make sure I have 0 issues with bugs before my plants get larger. They have 6 leaves right now and I only see a small fly or mosquito here and there which I kill with my hands. I want to get a couple of the best items right now that will prevent any possible issue with bugs.

[alltatup]

Amazon.com has most everything; for pesticides, this will help you: https://www.growweedeasy.com/safe-cannabis-pesticides

[oldjarhead100]

HTGSuply.com
Growershouse.com
amazon.com but you have to know what your buying
The first 2 I use all the time as well as amazon I use them for the free shipping

[MmmHmmml3]

Are these lights even worth buying? Just looking for some sort of cheap supplemental lighting to pair with the main light. I kind of like this 20pc 2.4w cob led, maybe it can be put onto some sort of movable standing device that can be put really close to the plants. It doesn't seem ideal for putting on the walls because it probably isn't strong enough unless it's close to the plant.

https://www.ebay.com/itm/20-pcs-lot-....c100008.m2219

Maybe something like this and mount it above the other light or on the side. I would have to remove the outer part that looks like it would dim it some. The color seems nice 2800k-3500k and it's 3 COB LEDs for 22$. Perhaps this could make a decent base and then mod it a bit.

https://www.ebay.com/itm/50W-100W-150W-COB-Chip-LED-Flood-Light-Outdoor-Waterproof-Lamp-Smart-IC-AC110V-/202014967743

A couple other cheap lights like this as well, but not sure if these are all so bad it's not worth the small cost.

If none of these are good the other option is slowly buy and build some sort of custom light, but ideally I do this and also get a cheap supplemental light for right now.

[Retodd]

Rule of thumb, you get what you pay for. Me and a bunch of other growers all use the viparspectra 450w. It runs around $115 on eBay.

[MmmHmmml3]

Retodd - What size harvest or g per w have you been getting with the 450w light? Looking back I should have just bought that. Based on initially plans a larger hanging system would not be ideal, but now it's not an issue. I think I might grab the 300w version of the Viapsectra. It looks like it might pair great with the 54w cxb-3590 3500k I already have. It gives some more red and blue. Mounting might be odd though unless I put them across from each other at a very light angle towards the other light.

[Retodd]

My indoor grow is a 2x4x5 tent and I mainly use it for veg. I’ve grown widows in it last year and blue cheese during the winter, but had a screw up on both grows...lol. I’m going to tag Spidermite and he’ll be able to tell you how well his do as far as mass weight

[mingzhu]

I was the first to try to grow a Sativa-led strain; I read a lot of articles about the strain and read the Nebula article and introduction; selected some seeds; in the training I used the main lining of the nebula and related LST technology; but I don't know if these trainings will suit these strains! I made a bold and adventurous attempt! (This includes more defoliation treatment) I want to know if these buds will produce big colas; they have grown for 49 days, flipped 12/12 for a week! At present, all plants have white hair; but I want to know; I have done a lot of training and defoliation before flipping; whether they hurt them! Thanks for all the comments! Thank you!

[mingzhu]

Additional explanation: I am using a coconut perlite 5 gallon air tank; 4@315LEC+2@630LEC+1@300 watt LED; GH3 combination + calcium magnesium + seaweed + silicone... indoor 3.5@4@3 (high) (Unit: m) I like to plant, like to study plants; so I am not afraid of failure! No matter what my results are, I would like to thank the great forum and the nebula! Because here, because you have aroused my desire to research and plant this magical plant! Thank God; from the current situation, the girls seem to be very good! Add some photos

[Retodd]

They’re healthy. Sativa is a scrawny plant as is. I’ve lollipoped over the years, fluxed, super cropped, and let grow naturally. I’ve only grown sativa a couple times, but have never cropped it. Looks like you’re doing everything right, so just be patient. Good luck

[alltatup]

Mingzhu, They look really wonderful!! It's good to train a Sativa because otherwise, they can get very tall, too tall! You are a very fast learner, very good at absorbing the information you have read from Nebula, and your plants show that you have taken excellent care of them.

[MmmHmmml3]

Looks nice, good luck

[mingzhu]

Thank you for your encouragement; hopefully there will be good results; I will continue to describe all the plants on other channels; thank you again!

[mingzhu]

Here is the past information about all plants

https://forum.growweedeasy.com/forum/growing-community/305444-i-want-to-know-if-sativa-led-strains-are-suitable-for-main-lining-training

[MmmHmmml3]

I have a question about topping and fim. I have been reading a lot on this when trying to decide what method to go with on the autos.

What is the difference between just cutting off the fan leaves so all the lower growth gets light and now you have more colas? Can you get the same result with this and if so, is there any benefit to just cutting the early fan leaves? I imagine less stress and maybe thats the whole point. This would be somewhere in the middle between fim and topping in regards to stress level on the plant.

After I fim'd the plant, it seemed about the same as just cutting the fan leaves off blocking the light. It seems like with fim we are just trimming the fan leaves to let light hit further down.

The plant below was from a lavender photo seed that made two plants (split them right away). The other is normal to large for 3 weeks old and this one is tiny. Fan leaves were blocking this new growth from getting light. Since this is an extra plant I figured f it, let's try this and I cut the fan leaves off in hopes that all 4 sections with new leaves will keep growing.

http://imgur.com/gallery/0Rsb4ye

[Retodd]

Wouldn’t let me open the gallery. The whole part of autos is the speed of growth. There’s a unlimited number of ways to trim and train. I have autos and photos in my tent right now. On my autos I’m fluxing them. My photos I didn’t top. Best way for growing your autos is to top after the second set of nodes. You’ll have a north, south, east, and west set of stems then. I’ll tag you in the next post and show you my widows. They’re a month old today. On my photos you’ll see how I’ve defoled them too. I take off all sun leaves on my plants as they grow and the bottom 1/2 to 2/3rds fan leaves. Only defol 3-4 days apart to give them a chance to get out of shock and always right before feeding.

[Retodd]

@mmmhmmmmI3 Here what’s in my tent now. The two in the back are white widow autos. I only have the photos in there to start them. They’ll get transplanted outdoors in a couple weeks. If you have more questions for professional growers come to me and my friends thread The Great Auto Showdown. He do back to back growing competitions and always happy to help out new growers. Hope this helps. If you zoom in on my pics you’ll see where each have been clipped.🙏🏼✌🏻

[oldjarhead100]

Retodd this is just something I figured out in cloth pots I will poke a hole in the side with my trimmers then I take some of that green wire wrapped in rubber this gives me the ability to tie down those plants that grow over the pot edges like the one in the 4th pic on the right side

[Retodd]

I do the same thing. I use coated speaker wire. If you see in the third pic I also use cotton twine. I can tie it to weights and really spread it out while using yo-yos to hold them up. How’s your flux going? It’s just going to make due until I get the room of moving the photos outside. It’s only a couple more weeks. I loaded my shovel out too and waiting to get it back😂

[MmmHmmml3]

@mmmhmmmmI3 Here what’s in my tent now. The two in the back are white widow autos. I only have the photos in there to start them. They’ll get transplanted outdoors in a couple weeks. If you have more questions for professional growers come to me and my friends thread The Great Auto Showdown. He do back to back growing competitions and always happy to help out new growers. Hope this helps. If you zoom in on my pics you’ll see where each have been clipped.🙏🏼✌🏻

Looks nice. I am trying to do my photo lavender like your big plant split into 4 stems. It's definitely split into 2 stems and they each go at a 45 degree angle. Then topped each of them again and it seems to be starting to explode. I see a tiny little leaf, come back from work, it's now a few times larger and see another leaf coming in. I will check out the Great Auto Showdown, thanks. Not sure what's up with the picture. I'll fix it sometime tomorrow.

[Retodd]

It’s fun af to try different methods! They’ll come back. Hell, last grow I accidentally set my soil on fire for 3 hrs and they lived. I’d have a habit of smoking in my room and putting my cig out in the corner of my flux box I built. Wasn’t thinking about how dry the soil was there and POOF....smoldering fire...lol. Lost half of my grow, but they lived. I now have a ashtray hahhaa

[Retodd]

Here’s a picture of the box I made for fluxing. I’ve since given it to my mom for herbs