Announcement

Collapse
No announcement yet.

Starting my second battle soon. Questions + tips? advice?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    From what I can see, you might do well to take a look at supercropping. The distance between main cola and the lowers is doing disservice to the lowers because of distance from the light.
    C'mon, mule!

    Coco/perlite
    3x3x6

    Comment


    • realhuuuman420
      realhuuuman420 commented
      Editing a comment
      The photos showed up after all? And yeah, I was considering high stress training for my next grow. I've read a bunch about pinching the main cola and then applying some LST and apparently people are having great results - with AUTOS! Which sounds almost criminal, and might be really risky, but yep.

      But I don't think I could/should do that during this grow. It's week 5, in theory it should only be 4 more weeks before harvest.

    #32
    The problem I see with the pants pot is the bottom part is wide while the top part is narrow. The wider bottom will have a higher perched water table ratio to the top so it's easier to overwater due to the large PWT vs the narrower media.

    I wouldn't increase the frequency so much as making sure the fat area gets enough water to stay moist but not so much that the perched water table keeps it too wet and drops the O² exchanges in the root zone. It's kind of a fine balance which is why I would've gone with a straight cloth pot. The pants are fun but aren't all that conducive to even media saturation.

    Comment


    • realhuuuman420
      realhuuuman420 commented
      Editing a comment
      Yuupp. I was literally thinking exactly this as I logged on right now.

      I watered again now, since it already dried up from last watering. A bit earlier than usual, but I noticed exactly what you're saying - gravity simply pulls the water towards the center.

      Did my best to somehow adjust the pants and properly water the fat, we'll see what happens next.

      Definitely ordering a proper cloth pot from Amazon for my next plant. The only reason why I didn't do it for this one was that I needed to start the grow, and could not afford to wait 2-3 more weeks. And IMO the pants are still better than the normal plastic pots. I could have also made them better and more evenly distributed. But here we are.

    #33
    You came at this with a modicum of vanity realhuuuman420. I don't care how Brazilian you are, with hips and an ass like that, your waist is not that narrow. You put 5 gallons of soil in a 10 gallon ass and had to cinch up the belt to make for the deepest roots.
    Next time, maybe try a cummerbund.
    C'mon, mule!

    Coco/perlite
    3x3x6

    Comment


    • Rootsruler
      Rootsruler commented
      Editing a comment
      Hahaha!

    #34
    Would appreciate if somebody looked at this with a fresh set of eyes. I've been looking for too long and honestly don't know what to think anymore.

    It seems like the damage has progressed slightly on the leaves already affected, and the ones that had maybe slightly affected tips now have ever so slightly more affected tips.

    Am I just imagining things? Maybe I'm just looking at the damaged stuff, like when your tooth hurts and your tongue just won't stop touching it, making the whole thing seem worse than it is? From the previous grow experience, I know that damaged leaves like this will continue to die off. But of course I still tend to think catastrophically.

    Anyway, here's fresh porn. The damn thing is bigger than it was two days ago, I know that autos do stretch a fair bit during early flower stages, but I thought we're past that. Or am I imagining that as well? ...

    Environment seems still fine. Humidity dropped a lil bit, so I have to have the humidifier on now, but that helps, so that's a non issue. Measured pH of runoff two days ago, it was a good 6.2-6.3ish. Water ph is also like that. Temps always stable between 23-25C.

    I'm just overthinking it again, right?

    Attached Files

    Comment


      #35

      Those brown spots are dead and dying tissue. The tissue is dead and dying from the issues you have been having. It is ugly but there is nothing you can do about it. What is dead stays dead, browns, crisps, and will create holes in your leaves.
      You are well into flowering which means there is a chance your major fan leaves will start yellowing and die off. If your soil has flushed out the veg nutes, there is a better chance your fans will yellow and die. Concentrate on keeping your pH good and using only flowering nutrients.

      C'mon, mule!

      Coco/perlite
      3x3x6

      Comment


      • realhuuuman420
        realhuuuman420 commented
        Editing a comment
        Many thanks, Ginger! Will do.

      #36
      Looking at them now I can see you have continued to lose pigment, quite a bit, and some classic signs of calmag deficiency also showing especially on the lower leaves. Calmag would have checked both issues.

      It may pay to use some with your bloom nutes but dont add it past about week four after the flip. Half strength at most.

      Flower Room: 11' x 7' x 7.5'H, 480w AC, 13gal/day dehumidifier, 1.5gal ultrasonic humidifier, 60gal (27gal usable) nute tank, 16" pedestal fan & 18" wall fan. Lighting and climate automated. Hand watering.
      Veg Cupboards: ​​​​​​Two 4x2x6H cupboards. SF2000 Evo in one SF7000 in other. Climate controlled and automated. Hand watering
      Aeroponics Low Pressure Bucket: 20W LED. 5 clones & 20W LED 11 clones
      Lights: Mars Hydro FC-E1200W, SF-7000, SF-2000 evo in flower room.
      Medium: Coco/perlite, 7.2gal pots, no drains
      Current Grow: ​​​5 x Photos Franklin's Orange Zkittles x Sour Diesel in flower room, 3 Franklin's White Widow x Sour Diesel Clones, 13 x Orange ZkittleZ x Sour Diesel clones in Aeroponics buckets x 2.
      Last Grow: A mix

      Comment


      • Gingerbeard
        Gingerbeard commented
        Editing a comment
        I can't believe I'm going here... even I think it's too early for flowering deficiencies. With the soil cooling off, any pH buffers, cal-mag, and nitrogen washing out, maybe getting a little N in will still be beneficial?

      • Bluey
        Bluey commented
        Editing a comment
        The calmag you add if in liquid form will likely be nitrate based which it will draw N from but check that, that's why you don't want to be adding it too far into flower, too much N.

      #37
      Here's what I would do.

      Do a half half mix of both bloom and grow base with whatever the recommended amount of cal/mag the manufacturer suggests. The additional N in grow should boost the amount of N you're putting in the soil so that your plant isn't constantly throttling between fed and starved. That should take care of the color loss along with helping in building flower structure. The cal/mag should take care of the yellowing/holes/crisping that is currently happening. The P and K boost should help throughout flower also.

      What I'm seeing is deficiency through relying on soil nutrition rather than feeding in addition to. Watering is also an issue but it seems like you've gotten better at that part. I would water the soil in the waist and water the fatter lower portion so that it soaks through the cloth. If you really want to make it easy and be sure that all the media is getting wet you can bottom water it by mixing up a feed solution and immersing the pants into the bucket until you see water coming out the top of the media.

      When I have sprouts in solo cups I feed them this way. Makes it easy to make sure all the media gets wet and because sprouts only need to be watered once or twice before they get transplanted into gallon cans it isn't a big deal. A little more work but it makes a big difference in plant development.

      Unless you're growing a plant in a 15 or 20 gal bag with highly fortified media and a highly active microbial community at minimum I don't see how your soil can have enough food to get your through flower.

      Comment


        #38
        I suppose the below simply confirms what you are all saying anyway - CalMag deficiency, started feeding too late, and ofc those watering issues I pointed out as well.

        Still wanted to detail this in case there's something terribly wrong with the feeding - especially the CalMag part. Should I give a bit more, say 1.2 ml / L, even if BioBizz says max 0.8ml, to compensate for the lack?

        I have been giving it CalMag starting with my first feeding, but clearly not enough. I started under half of the recommended dosage according to the BIoBizz chart, and steadily increasing to 100%- https://www.biobizz.com/wp-content/u...le-EN-2024.pdf

        27th of Oct: BioGrow (0.5ml), BioBloom (1ml), TopMax (0.5ml), CalMag (0.3ml)
        31st of Oct - Bloom (2ml), Grow (1ml), Max (0.5ml), CalMag (0.4ml)
        2nd of Nov - Bloom (3ml), Grow (1ml), Max (1.5ml), CalMag (0.4ml)

        Today will be the 4th feeding, I planned to up the dosage all the way up to 100% of recommended, meaning BioBloom up to 4ml, and CalMag of 0.8ml per liter of water. BioBizz recommends using BioGrow throughout the entire grow (starting at around when soil starts to cool down), at 1ml per liter of water going in.

        And something that keeps bugging me - this needs to be a lesson for my next grow. So, in retrospect, should I have started feeding as soon as I noticed the slight pigment loss? If yes, then this would be a clear and hard to miss sign, and next time I will be able to understand what the plant is trying to tell me.

        Comment


        • Rootsruler
          Rootsruler commented
          Editing a comment
          Agree with Bluey

        • Gingerbeard
          Gingerbeard commented
          Editing a comment
          Bluey you grow fem, yes? Not auto?

        • Bluey
          Bluey commented
          Editing a comment
          All what I have grown outdoors was regular seed.

          Indoors a mix of regular and fem and only a four autos to date.

        #39
        Bluey ... realhuuuman420 is growing auto. Your recommendations for when to start calmag and bloom nutes are for fem.
        I'm going to respectfully challenge or question what you said based on me growing autos in coco with the brand nutrients I use. I've been harvesting at 10-11 weeks. Lady bits can show at 3 weeks. At 4 weeks I add half bloom nutes to the full veg I've been giving since the 'sprout phase' was over. Next watering is half veg to full bloom. Full bloom from then on. From sprout to harvest, if I use nutrients, I use calmag.
        So much respect.
        Last edited by Gingerbeard; 11-05-2024, 12:58 PM.
        C'mon, mule!

        Coco/perlite
        3x3x6

        Comment


        • Bluey
          Bluey commented
          Editing a comment
          My recommendations were for photos of course. I missed the bit about autos.l so my nute tomongs don't apply

        #40
        Beginning of week 7 :O looks like 1-2 weeks until harvest!


        Comment


          #41
          So very close! Very excited for harvest. Hopefully will be ready by this weekend, but don't mind keeping it for as long as it needs. And then the real battle of drying and curing starts!


          Comment


            #42
            I may be being baited, but I'll bite. But only nibble. Why do you think you will be ready this weekend?
            C'mon, mule!

            Coco/perlite
            3x3x6

            Comment


            • Rootsruler
              Rootsruler commented
              Editing a comment
              Lol! : )

          Check out our new growing community forum! (still in beta)

          Subscribe to Weekly Newsletter!

          Working...
          X