Godfather OG 100% Organic grow has started

[Radeon]

Clones today. I think both are going to make it....Feeding same water as big ones....

[Radeon]

Tent settings and readings just below canopy level....

[Radeon]

Tied down some of the taller branches to get the canopy even. One on the right outpacing her sister. One more branch I'll do but have to wait for a little more stem.

[Radeon]

Watering day pics....3rd day of flip....

[Radeon]

Oh, and I just got a bottle if this in the mail. Gonna start feeding 1tbs per gallon of it to the big girls to see if it makes a difference. Last night was first night of flip....

[Radeon]

Cloned the right side plant. Cones 4 hours after cutting, clones another 4 hours later. Used Clone X and AC Infinity humidity dome. Lights are at a 1.Took 2 cause I didn't want to clone the left (weaker ) and didn't want to take the big ones on the mother. Those 2 were below the canopy by 5 inches so I took them. They look good to me, but since I'm a virgin when it came to cloning I don't know what the next 2 weeks will bring. I'll be estatic if they survive till morning lol....Used straight Lush soil with the same water I feed my big ones. That water has 1/2 heaping tablespoon of Terp Tea Bloom.

[Radeon]

Oh, I'm gonna share my tent mods to my AC Infinty 2x4x72". I noticed last grow when the vent system is on, the back of the tent and front of the tent sucks in about 4" on each side. So total loss of horizontal grow space is about 8" when the vent system is on a 3. So, pulling a McGyver, I used 4 straps that were not in use (2×2) and put them up to prevent them from being sucked in. 8" is a lot to lose when your plants grow like these. You can see in the pics the strap stopping the door from caving in...

Also, the brackets on the Evo 3. They cause the light to hang low. Lose another 5" just by using the stock bracket. So I used the roll of zip ties that came with the tent. Fed them through the holes on the light and wrapped them around the top bar. Now as the plants stretch, all I got to do is twist them tighter to pull the light closer to the vent system, eliminating the need for the brackets. I left the brackets on cause when seedlings even on 10 the light needs to be lower. See pics. Forgive my dust jacket, it will get changed when I flip next week. I double checked heat output of the driver to see if it would compromise the fan motor and electronics, and minimal change. Not enough to be concerned about.

Another thing, below the window needs to be a little loop of strapping to sick your finger in to pull it out twards you to see seedlings or small plants. You have to use your fingernail on the seam to pull the window towards you so you can see that far down. Or a second window at the midway point on the tent. If using the stock light that came with it (S22 ?) if the light is below the top window, you can't see down because it's solid, not a bar light. You HAVE to open the tent up. In my world, big no no. I only open to water and that's it. Using the Evo 3 its not a big deal, but the stock light you cant see through it. The board prevents that.

Just my 2 cents. Forgive me AC Infinity. Not dogging on your stuff. I use it all, but that tent needs to be a little more user friendly. If it were me, I'd make some slight changes to improve an already great product. Maybe a bar across the midway point on the front and back to prevent the tent from sucking in on itself. Make the one in the front removable.

[Radeon]

3 weeks growth....Keep in mind that growth will more than double in speed when stretch hits.....

[Radeon]

Watering day pics. Gonna be flipping mid week. Did some pre-flip trimming today. Ppfd around 580. Getting ready for the stretch......

Pic for comparison from Sept 18th. 3 weeks growth...

[Radeon]

Watering day pics. 4 days after topping. Gonna wait a bit more before flip.PPFD is around 580-600.

[Radeon]

I went ahead and topped today. I know I said I was going to wait but they are about 11" this morning. I'll give them about a week to recover (my plants recover fast) and give those bottoms time to catch up. I felt like it was time. I know I keep updating so frequently, but I figured might help someone out....

[Smallgrow]

Cool thx!

[Radeon]

Tuck worked. Tucked 2 more on same plant. Both doing excellent. HEAVY feeding. Another 3 days I'll be topping. Around 12" seems to be a good spot for plants that grow like this. 12" is when I'll switch to 12/12. They are growing just like my Girl Scout Cookies. PPFD is up to 500...

[Radeon]

20$ us

[Radeon]

And I've decided to clone her. I hoping potency is good, but she is a very healthy, robust, heavy feeding, bushy plant and at 8" she is already stinking. I've never cloned before so this will be a new experience for me. So if I f*ck it up, have mercy...