Announcement

Collapse
No announcement yet.

Godfather OG 100% Organic grow has started

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Radeon
    replied
    Decided to add a little more to my tea. Bought this stuff at my local grow shop. Adding 3/4 tbs Terp Tea Bloom, 3/4 tbs molasses, and a little less than 1/2 cup of castings to a gallon. Just for a little more boost. Aerating now and will start watering tomorrow. Couple updated pics. Bout 3 weeks since flip. Stay tuned....
    Attached Files
    Last edited by Radeon; 11-07-2024, 02:18 PM.

    Leave a comment:


  • Radeon
    replied
    For something to keep me occupied waiting on election results and I was curious, I did the sides with the left over plant stakes I used for the front and back. About 2 3/4" lost on each side. Problem solved. 4$ total cost....
    Attached Files

    Leave a comment:


  • Radeon
    replied
    Current tent settings....running a dehumidifier 24/7 now because of the humidity.
    Attached Files

    Leave a comment:


  • Radeon
    replied
    First time I've encountered such a drastic difference in height. She stretched alright....
    Attached Files

    Leave a comment:


  • Radeon
    replied
    Modified my tent. Used the same stick I used for sensors but cut to width. Poof....problem solved. Cut down on tent collapse with vent fan on. You can see in the pic how much that tent wants to suck inwards. I moved it higher. It was just an experiment to judge results over straps. These work better. Stiffer. No adjusment.
    Attached Files

    Leave a comment:


  • Radeon
    replied
    And if anyone lost track, these plants are 48 days old from the time I put the seeds in a paper towel (Sept. 13th).

    Leave a comment:


  • Radeon
    replied
    Only been 2 more days but it is watering day....the pic with the readings is from in the middle of the night, so those are the settings I'm running to achieve kpa around .80. Having to run dehumidifier at night. Plant on the right misbehaving, but I'm just letting her go. I could have filled up the whole tent with just her.
    Attached Files

    Leave a comment:


  • Radeon
    replied
    Watering day update. PPFD is up to 800.
    Attached Files

    Leave a comment:


  • Radeon
    replied
    Had to pull out the dehumidifier. Bought it back in Aug. but never opened it. $40 and it helps. Dropped humidity by about 10%. Humidity was throwing off kpa. Kpa was diving at night to .57 +/- .03. Sensors are at canopy level. Got the exhaust at a 5 just to help pull the moisture out of the tent. Been stable since adding the dehumidifier.
    Attached Files
    Last edited by Radeon; 10-26-2024, 01:57 PM.

    Leave a comment:


  • Radeon
    replied
    Originally posted by Pyrokill View Post
    I have my next grow going in cups still. Great idea on the walls coming in, I'm going to do that fix before these get growing more. I've seen my tent do that also and I usually fill my tent. I use a 6" fan and it moves air fast. I've noticed moisture from the leaves touching the walls. I'm going to brace mine so I get them to touch less. Good catch.
    It wasn't the moisture that bothered me, it's the lack of side light availability to the fans. When the tent closes in after closing, it shuts off light to lower branches and side branches. You almost have to trim and lst for tent collapse degradation. If the tent says 2x4, I want 2x4. Not 1' 8" × 3' 4". The plant stick I bought for my sensors might be a better alternative. The straps need tightening every once and a while and its annoying. Might buy 2 more and cut to width of tent. Zip tie em up and they won't need tightening. Only have to take down the front one when moving the whole plant, otherwise I can work around it....

    Current pics. They praying. My ladies are being satisfied. My exes will tell ya that's how I roll lol....
    Attached Files

    Leave a comment:


  • Pyrokill
    replied
    I have my next grow going in cups still. Great idea on the walls coming in, I'm going to do that fix before these get growing more. I've seen my tent do that also and I usually fill my tent. I use a 6" fan and it moves air fast. I've noticed moisture from the leaves touching the walls. I'm going to brace mine so I get them to touch less. Good catch.

    Leave a comment:


  • Pyrokill
    replied
    I have my next grow going in cups still. Great idea on the walls coming in, I'm going to do that fix before these get growing more. I've seen my tent do that also and I usually fill my tent. I use a 6" fan and it moves air fast. I've noticed moisture from the leaves touching the walls. I'm going to brace mine so I get them to touch less. Good catch.

    Leave a comment:


  • Radeon
    replied
    Just some pics for the update.. PPFD is around 750 and that's about the max I'm going with these ladies. Been 9 days since flip. They aren't stretching as much as my Girl Scout Cookies. They are actually pretty tame. I like that. They are growing more nodes and side branches more than vertical growth. Please forgive the little ones popping up. I have a neck issue and it's very painful to get down on my knees and trim properly. Had an epidural about a week ago. I have to do a little at a time and the one on the right, it is a marathon keeping up with her. She needs daily attention...
    Attached Files

    Leave a comment:


  • Radeon
    replied
    Bought a plant stick at the local garden store. Gonna be easier at keeping track of readings at canopy level. As they grow, I'll just slide up the sensors to match the top of the canopy. $2. I'm going to run the cables up the sick from the bottom. I just did this as a test.....
    Attached Files
    Last edited by Radeon; 10-21-2024, 01:51 PM.

    Leave a comment:


  • Radeon
    replied
    Watering day. Dialed back on nutes this watering. Half of what I normally use. Next watering I'll supplement as usual. PPFD is at 700, kpa .88+/-.05. Stretch has begun. They giving me no issues. Now human women is another story lol....
    Attached Files
    Last edited by Radeon; 10-26-2024, 01:58 PM.

    Leave a comment:

Check out our new growing community forum! (still in beta)

Subscribe to Weekly Newsletter!

Working...
X