So yesterday I built a cloning system and today I’m building a top feed dwc (one as a trial run) for after clones take. I plan on going 100% hydro and want to make everything to save money and be able to evolve or change them in the future. I plan on running 40L for a custom 3 site system. It’s nothing ground breaking just my own version of what so many others have already accomplished. Please help with tips or suggestions as I am new to hydro
Announcement
Collapse
No announcement yet.
Diy dwc
Collapse
X
-
I put two valves and a T in the delivery system so I can pump waste nutrient out to drain with the simple turn of 2 valves. Install barb fittings in hose and run feed lines to pots! Really easy and only took about an hour. NOW..... does it work? Time will tell. Please suggestions, comments or questions welcome!3 PhotosSetup
4’x4’x6.6’
600W MH
2x innova 19w full spec led
175cfm fan, can 33 filter
8gal DIY reservoir/ hydro system
Comment
-
Howdy BlueBudz, It looks like You have a good plan going. I think that You will like hydro, It is faster (the longest grow time that I have had was 22 weeks), the only down side is that the aroma and taste is not as good as soil grows, but I do like the ease of the hydro growing, less problems (bugs, gnats, and other unwanted things found in soil), and it is easier to correct things if they get out of hand (drain and refresh the nutrients).
Good luck with Your endeavors!Smoke weed,.....grow peace!
Comment
-
Comment
-
It looks like it should work. I would recommend using a little tape ( I use just plain old clear packing tape) to keep the aluminum covers in place to prevent any light infiltration into the reservoir. On some of my earlier grows, as the roots grow, they can (and have) pushed the foil, that I use away, causing light leaks. It would be better to secure the covers down. The tape is easy to remove if needed to service the plants, if needed.
Looks great over all! Good luck with Your grow.
-
-
It'll work but I think that it will get really crowded. When I switch over to a 4 tote UC system next grow I'll only have a single netlid like you're using in each tote. It is MUCH easier to manage a single tree rather than a cluster of shrubs .WHAT???
5x5 grow space
900w of Vero's and F-strips
4-17gal totes self-made UC system.
Comment
-
Two thoughts: Big reservoirs are more stable (pH, temp, nutes) and leave more room for roots (I like >5 gal/plant), and AN's pH Perfect line seems to have an avid following because it really seems to make reservoir pH more stable. (I haven't used it though.)Last edited by DoctorJohnson; 02-28-2018, 11:41 AM. Reason: "more room for *roots*, not more room for nutes."
Comment
-
I could run 40L in there no problem. I look at it like this: one res to monitor, trained properly in the middle of a 4x4 should fill it. Just got a blue lab ph/cf/temp monitor so if I keep it perfect.....🤞Setup
4’x4’x6.6’
600W MH
2x innova 19w full spec led
175cfm fan, can 33 filter
8gal DIY reservoir/ hydro system
Comment
-
Thanks man, I plan on topping and lst a lot because I will need to leave them in veg for at least 3-4 weeks .Both Royal Queen Seeds one critical up front and two royal gorilla in the back. https://forum.growweedeasy.com/forum...la-x2-critical going to try and keep a journal feel free to come along.Setup
4’x4’x6.6’
600W MH
2x innova 19w full spec led
175cfm fan, can 33 filter
8gal DIY reservoir/ hydro system
Comment
Comment