User Profile

[gbauto]

Agreed. I think that as long as the a/c system in your condo can handle the thermal load from the fixture you use it'll be fine.
You can reduce...

[gbauto]

Best suggestion I can offer would be to add up the total ACTUAL wattage your fixtures consume and divide that total by 50(watts/sq ft) to give you the...

[gbauto]

I'm pretty sure this is the result of too much nutrient concentration. Your flushing the media helps but it will take a while for the new growth to show...

[gbauto]

Because I live in the Smokies, my humidity rarely drops below 50%. It will usually take 10-14 days before they have lost enough moisture for me to buck...

[gbauto]

Yes, 1000 watts from the outlet to have enough light output to ensure adequate intensity. That's using fairly efficient diodes as well.

[gbauto]

https://www.alibaba.com/product-deta...FirstScreen=tr...

[gbauto]

Welcome, tropa.
35 sq ft of canopy will need at least 1000 actual watts of efficient diodes to get adequate light levels.
You'd be better...

[gbauto]

Looks reasonably happy to me....

[gbauto]

Agreed.
You need to get your environmental conditions under control. You probably have a humidity spike when you shut down your extraction f...

[gbauto]

I think that if you can maintain those temps and keep the RH in the 50-70% range it'll rock. Good luck with your grow.

[gbauto]

Auto's can be a bit funky trying to figure out when they're done.
My suggestion is to wait a week past when you think they're done. It'll be...

[gbauto]

Yeah, the 301b's and 301h are the same diodes, just different sku's from Samsung for lighting and horticultural apps.
The fixture I use seems...

[gbauto]

It should be ok. I find that as long as the section of the stem I'm kneading is green and not woody, it always works. Just squash the stem until its...

[gbauto]

That fixture will probably run around 110-120 degF surface temp. Running a typical extraction/circulation fan should keep tent temps around 80 if the...

[gbauto]

I usually stop at 6-8 main tops and then use layers of trellis nets to add vertical support as needed.
I am not familiar with that line of nutes...

[gbauto]

I'd just let them grow. Try to make sure the temps are above 70 degF with a decent light source.

[gbauto]

The biggest issue running super low RH is that it creates a huge VPD at the leaf surface that makes nutrient/water uptake a challenge....

[gbauto]

Last pic of the plants looks fine. I'd just continue and adjust from there.

[gbauto]

read the edit

[gbauto]

At this point, all you can do is some LST or perhaps some selective HST to fold the unruly tops over. I've done it in the past with decent results. The...