Announcement

Collapse
No announcement yet.

Making a hydro cloner

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Making a hydro cloner

    hey guys I’ve been looking at the ez clone and other similar cloning systems. The prices are outrageous imo. I decided to make my own and I think it could work quite well..... I hope. Anyway I spent about an hour and a half and under $60 CAD. All the supplies in the pic will also build a top feed dwc later.
    Setup
    4’x4’x6.6’
    600W MH
    2x innova 19w full spec led
    175cfm fan, can 33 filter
    8gal DIY reservoir/ hydro system

    #2
    I also installed a t fitting opposite of the inlet for expansion. I think once roots begin to hang down flow to the middle pot may be reduced, if so I will add another nozzle toward the middle for $1.50
    Last edited by BlueBudz; 02-13-2018, 04:05 PM.
    Setup
    4’x4’x6.6’
    600W MH
    2x innova 19w full spec led
    175cfm fan, can 33 filter
    8gal DIY reservoir/ hydro system

    Comment


      #3
      Setup
      4’x4’x6.6’
      600W MH
      2x innova 19w full spec led
      175cfm fan, can 33 filter
      8gal DIY reservoir/ hydro system

      Comment


        #4
        It seems to have everything the ez clone has so time will tell.
        Setup
        4’x4’x6.6’
        600W MH
        2x innova 19w full spec led
        175cfm fan, can 33 filter
        8gal DIY reservoir/ hydro system

        Comment


          #5
          What are the specs on the pump? I've been wanting to do something similar but can't decide on a pump.

          Comment


          • BlueBudz
            BlueBudz commented
            Editing a comment
            132gph 28w you can use a much smaller pump I think I kinda went overkill

          • gbauto
            gbauto commented
            Editing a comment
            Agreed-It takes very little volume to get a good fog going.

          #6
          Good deal BlueBudz
          Love me some Diy builds, nothing better than your own. I did me one for under 30 bucks for 6 clones.
          Space for Rent.

          Comment


          • BlueBudz
            BlueBudz commented
            Editing a comment
            Thanks Mr.F
            I could have saved a few dollars on a smaller pump and not food grade pail. But after looking at the prices of the ez clone I was just so far ahead I thought make it a bit better!

          #7
          Loaded her up with 4x RQS Critical and 5x RQS Royal Gorilla
          Setup
          4’x4’x6.6’
          600W MH
          2x innova 19w full spec led
          175cfm fan, can 33 filter
          8gal DIY reservoir/ hydro system

          Comment


          • D.A.A.S.69
            D.A.A.S.69 commented
            Editing a comment
            Oh yeah, looking nice all loaded up. Ain't nothin that makes me happier, than saving a buck or two an build something that you want, homemade is usually better anyway.
            Good Luck with your project, and I hope you have many productive and Happy Grows.

          • BlueBudz
            BlueBudz commented
            Editing a comment
            Thanks brother. As long as it works well I’ll be happy with the time and money it took! I did have a leak where the power cord goes into the bucket, but used a piece of neoprene insert and voila.
            Last edited by BlueBudz; 02-14-2018, 08:16 AM.

          #8
          Very nice! How big do you like to cut your clones?
          Nothing is foolproof for the sufficiently talented fool.

          Comment


          • BlueBudz
            BlueBudz commented
            Editing a comment
            Haven’t really taken too many yet. Maybe around 6” and as many nodes as possible

          #9
          That's awsome nice work. I want to get somthing like that going for an auto experiment I want to do.

          also i know u can buy a cheep plastic humidity dome that will fit that bucket lid
          It's 4:19 u got a minute?

          Comment


          • DingusKhan
            DingusKhan commented
            Editing a comment
            A tupperware cake carrier lid might fit. Or a deli platter cover, like for a shrimp cocktail ring, might also fit. You might find one of those glass donut tray covers at a thrift store.

          • abadtrip
            abadtrip commented
            Editing a comment
            Sorry it took me a while to rember where i saw it I was at a hydro store in mass https://www.htgsupply.com/products/the-plant-dome

          • BlueBudz
            BlueBudz commented
            Editing a comment
            Thanks ABT unfortunately some things are just impossible to find in Canada.... not sure why but it really gets in the way of getting stuff at a reasonable price

          #10
          Nothing better than good Canadian know-how.
          ​​​​​​3 X 3 gorilla. Promix soil . Green Planet Nutes
          Mars Hydro
          Vortex in-line 6" fan

          Comment


          • BlueBudz
            BlueBudz commented
            Editing a comment
            🇨🇦🤘 ehh!

          • RosettaStoned
            RosettaStoned commented
            Editing a comment
            I hear newfies are better 😄😉

          • BlueBudz
            BlueBudz commented
            Editing a comment
            I’m both Rosetta! Haha

          #11
          Almost 24 h in and these cuttings look like their loving life, reaching almost totally vertically. This thing might work
          Setup
          4’x4’x6.6’
          600W MH
          2x innova 19w full spec led
          175cfm fan, can 33 filter
          8gal DIY reservoir/ hydro system

          Comment


          • Canuck147
            Canuck147 commented
            Editing a comment
            Absolutely should. They are standing up like that cuz they soooooo happy. Just don't let them stretch up too much too fast.

          • DingusKhan
            DingusKhan commented
            Editing a comment
            Sweet! What strains are you running in there?

          #12
          Thanks guys there are 5 royal gorilla and 4 critical.
          canuck they aren’t stretching just all the leaves are very perky and upward pointing
          Setup
          4’x4’x6.6’
          600W MH
          2x innova 19w full spec led
          175cfm fan, can 33 filter
          8gal DIY reservoir/ hydro system

          Comment


          • BlueBudz
            BlueBudz commented
            Editing a comment
            Thanks DAAS that’s the plan. I have never seen clones perk up like that. Every time iv taken a cutting they get droopy

          • Waltermelon
            Waltermelon commented
            Editing a comment
            I've had some plants do that. In my case the light was too bright. My guess is they were trying to limit the surface area exposed to the light. Not saying that's the case with yours, but it's something to watch. Mine were also full plants, not clones.

          • BlueBudz
            BlueBudz commented
            Editing a comment
            Ok Walt I’ll keep an eye on that. To me they look happy as can be. They are in a 4x4 tent with 240w LED, not in the “direct” light. I am going to keep a lil journal in this thread kind of so you can all see if it works ok or not

          #13
          Small update, I cut the mesh out of the mesh pots, Now they just act as a collar. I got thinking about it and after the roots get through the pots I won’t be able to remove them.
          Setup
          4’x4’x6.6’
          600W MH
          2x innova 19w full spec led
          175cfm fan, can 33 filter
          8gal DIY reservoir/ hydro system

          Comment


            #14
            So the cuttings have been in the cloner for 6 days and they look good! I changed the 3 blue nozzles for 3 more red they move more water. What do you guys think?
            Setup
            4’x4’x6.6’
            600W MH
            2x innova 19w full spec led
            175cfm fan, can 33 filter
            8gal DIY reservoir/ hydro system

            Comment


              #15
              Roots in a week! That's pretty awesome!
              Nothing is foolproof for the sufficiently talented fool.

              Comment


              • BlueBudz
                BlueBudz commented
                Editing a comment
                Thanks Dingus, I was quite happy to see them!

            Check out our new growing community forum! (still in beta)

            Subscribe to Weekly Newsletter!

            Working...
            X