recently I had a very high PPM in the root zone and I locked them out so I flushed them out ,that particular plant was just under the scrog so I left all the leafs on it so that is old damage I hope lol
right now My root zones are still a little high 7to900 ppm in and 12to1300 out once a week since this happened I have done a small flush about a gallon with 60 mls of floracleen per 5 gallons of water each plant gets 2 scoops ,I let it sit for a couple of hours then use 30ml of flora clean to 5 gallons of water after that I give them a normal feeding , I will have to do that today I missed watering on Fathers day and run off ppm was very high 1300ppm plus I got very little run off so its a flush today
Today is the first day of revised week 4 of 12/12 still no bud starting to show but they grew 6 inches yesterday I had to super crop that entire middle section
I had to change some guide wheels on my light mover they are the cheapest dam things I ever seen I will have to change them out every grow from now on ,I did the near side but can not swap out the far side without taking light mover apart .Right at the end of travel in one direction it kept stopping so I ended up shortening the distance it travels this will affect the two plants on that end Oh well.
right now My root zones are still a little high 7to900 ppm in and 12to1300 out once a week since this happened I have done a small flush about a gallon with 60 mls of floracleen per 5 gallons of water each plant gets 2 scoops ,I let it sit for a couple of hours then use 30ml of flora clean to 5 gallons of water after that I give them a normal feeding , I will have to do that today I missed watering on Fathers day and run off ppm was very high 1300ppm plus I got very little run off so its a flush today
Today is the first day of revised week 4 of 12/12 still no bud starting to show but they grew 6 inches yesterday I had to super crop that entire middle section
I had to change some guide wheels on my light mover they are the cheapest dam things I ever seen I will have to change them out every grow from now on ,I did the near side but can not swap out the far side without taking light mover apart .Right at the end of travel in one direction it kept stopping so I ended up shortening the distance it travels this will affect the two plants on that end Oh well.
Comment