What's new
By:
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

The Ganja Ged Thread

First water change, didn't notice any water discoloration, though apparently I should have. I only had some filtered water last night so the PPM's were a bit high which may account for that. I have distilled now so we'll see.

PPMs in old water rose ~100 and PH dropped .0.4

Buds feel fine still firm, no waterlogged mush. Color looks about same.

Now I haven't seen anyone actually test PPM's and PH during this which kind of baffles me, so I'm checking :) At worst it'll tell me nothing but could provide some insight on the process.

It is reminiscent of putting vegetables in water after cutting to keep fresh and crisp. I can't help but think there's a temp range that is optimal, but I'll stick with room temp for this try.
 
Man....! I'm intrigued!
I harvested last night out of necessity. Today the landlord is coming over with a contractor to measure windows and siding. Maybe should've put her under water.lol
 
Not only that but my thought is it might make for great edibles, letting the actual butter or whatever have an unadulterated taste.
 
wow that was an excellent explanation and I'm super intrigued , haha GG I love getting boxes in mail its like Christmas and usually I forget what the hell I bought lol so its a surprise ,
 
Second water change, water not discolored but definitely cloudy.

PPM's rose 140
PH dropped 0.5

Buds look perhaps a lighter/paler green
Buds firm no waterlog
Mid sized buds definitely have a decreased smell, almost absent on some smaller ones, though the largest ones still have a solid though reduced smell

Looks good so far. The increase in PPM's is probably due to getting the distilled water, although it could also be just the natural progression of the process. Something to watch for on future tries.

5-7 days seems a bit long, at least in my head, since I have 2 jars I'm going to watch for the PPM's to stabilize and dry one jar if it happens before the 5 day mark. 5 if it's stable 7 if not for the other jar.
 
Busy day, between the new med working wonders, that damned marine oldjarhead, and the new tent ordered, I figured I should get something done. :)

So I finished making the E&F system, and got the plants into the trays. I was going to run two 3'x1.5' trays but decided to downsize to 2'x1.5' trays just to give a bit of room to work around. The nice thing is I can swap trays back and forth because everything is made to be interchangeable. So once I have a few grows with it I can expand easily.

The plants are going so strong, some have roots already out of the Smart Pot!

Also changed the res today, last one ran about 3 or 4 weeks and was still fine but since I'm using a different res now it was a good time to change. Upped the solution to just below 1/2 strength, I'll watch for burn over the next few days before adding anything.

Also moved some stuff in the room to move both tents in and on a different wall.

So that's a lot for me for a day. I'll get some pics tonight or tomorrow.

 
No Title

Couple quick shots, I'll get some better ones tomorrow
 

Attachments

  • photo27668.jpg
    photo27668.jpg
    977.7 KB · Views: 0
  • photo27669.jpg
    photo27669.jpg
    1.8 MB · Views: 0
sure blame it on the Marine lol wow lots of stuff getting done , do the roots usually grow out of the cloth bags ,or is that because of the Eand f table. I'm asking cause I'm going to cloth bags and I dont want to have a heart attack lol
 
First time with smart pots but I've seen it happen before in pics. It's normal though because even the label on the pots mention it, or the website does, something, lol.

But that plant is about 3 weeks old and already growing out of a 2 gallon smart pot, the others at about a week maybe 2 are starting to pop out of 1 gallon pots, It's exactly how I'd hoped they'd work so fat, I just didn't expect it to happen so fast.

And your new room is fantastic! That is an example of getting stuff done. :)
 
3rd water change

Water clear, smell almost totally gone from buds, buds firm, no water logging, seem paler in color

PPM's rose 76 about half from yesterday

PH rose 0.5

I've only been reporting on one jar which has more bud material and is from the mom in soil, the unreported jar is from the DWC plant. The interesting thing here is that while the fluctuations are similar in pattern the numbers for the PPM's are much lower, suggesting the Hydro has less to flush out, or possibly is harder to flush out, no way to tell currently. It is something to look at in future tries.

Total opinion based on impression, the larger well formed buds seem to actually be tightening or firming up. That's very subjective currently but something to look at in future tries.

Another note for future tries is to take trich pics each day to note any changes in quantity and color. In theory the buds are still alive, it's possible a water cure could effect when to best harvest by maybe up to a week?

I think I'll pull the hydro buds tomorrow, while the patterns are similar the Hydro only went up like 20 ppms, which is close in ratio to the soil just lower numbers. But yea, pull, dry and taste tomorrow at 3 full days and let the other jar keep going and keep reporting it.
 
A point I left out in that which makes the difference between the 2 strange. The soils were a few days up to a week in flush when I cut and the hydros are still on nutes. If anything I'd have thought the difference would be reversed.
 
No Title

4th water change

Water clear, a new smell not of cannabis but a more, hmmm earthy smell?, buds firm no water logging, color seems stable from yesterday.

PPM's rose 19
PH rose 1.1

Such a low increase in PPM would suggest almost done. The PH increase was more than usual, not sure what that means.

This run I think is successful enough to warrant further testing, pending a smoke report naturally. It's clear that buds can be submerged for a minimum of 3 days with no plant matter decay and that something is happening which raises the PPM's and PH.

A lot of questions are raised. Best water change schedule to limit diminishing return, Differing results at different PPM levels, my current opinion is this method is better controlled by PPM measurement rather than by days of cure. Possible substitute for flushing, effects of different levels of water cure followed by jar cure, quick fan dry vs. normal air dry, useful on already dried and or cured buds? and on and on.

I'm not sold on it and wouldn't recommend a full crop water cure, but it seems intriguing enough and has enough positive results so far that further testing is a worthy pursuit. I'm already working out a second test for some point, a bit more focused now that I've done it once and had a chance to see and think about it in actual practice.


Pulled the hydro buds today, currently drying under a fan here's a couple pics, the one I posted before right after trimming and two from today directly out of the jar.

The chart looks like this



Hydro -


7.0 - 34 --- 6.4 - 89

6.4 - 22 --- 7.5 - 49

7.4 - 21 --- 7.8 - 30 (Pull for dry)
 

Attachments

  • photo27574.jpg
    photo27574.jpg
    1.7 MB · Views: 0
  • photo27741.jpg
    photo27741.jpg
    2 MB · Views: 0
  • photo27742.jpg
    photo27742.jpg
    1.8 MB · Views: 0
No Title

Couple of Pic updates after some dry time. Still to wet to burn so no smoke report yet, but.

A ) I don't think it's terrible looking at all. This isn't a pretty strain to begin with but even so, while not top shelf looking it isn't like unrecognizable or toxic looking, lol

B ) I didn't get a "before" microshot but the "after" pretty much says no or little trich damage.


I'll for sure be trying a bit more with the final harvest. I'm actually very excited to try this with some real genetics! I'm all over this as a way to cure for edibles and e-cig juice, if the potency is there the no smell/taste will be amazing for those if nothing else.
 

Attachments

  • photo27774.jpg
    photo27774.jpg
    2.1 MB · Views: 0
  • photo27775.jpg
    photo27775.jpg
    1.9 MB · Views: 0
  • photo27776.jpg
    photo27776.jpg
    271.1 KB · Views: 0
  • photo27777.jpg
    photo27777.jpg
    297.1 KB · Views: 0
No Title

I can for sure say that water cured weed will get you where you want to be :)

I'll do todays reporting on the other jar a bit later today, after this nice morning "cruise" I'll also wait to do a write-up until the other jar has run it's course and been smoke tested.

The jar of hydro fully dried after about 12 hrs with a small light fan blowing over the top. then spent the night in a air tight stash jar. This morning they were damn near perfect. They probably could have used a couple hours outside and another night in the jar and been right on the money.

Burned well, nice white ash, it has a taste but not of cannabis, kind of a smokey flavor, camp fire-ish I might call it.

The funny thing here is everything you usually hear about why it won't work all went perfectly, but the one thing most seem to agree on is it's smoothness, which I find a bit lacking, or at least not living up to what I had imagined reading the reviews. I wouldn't call it harsh, but it has a definite "hot" feel at the back of the throat to me. Not terrible, no coughing, but not what I would describe as the smoothest weed I've ever smoked. Now that may change in the other jar which is getting the full 5-7 days submerged. If the hot was toned down a bit it might actually pair decently with the flavor.
 

Attachments

  • photo27795.jpg
    photo27795.jpg
    1.8 MB · Views: 0
  • photo27796.jpg
    photo27796.jpg
    1.2 MB · Views: 0
  • photo27797.jpg
    photo27797.jpg
    1.4 MB · Views: 0
Very cool GanjaGed ! That looks like it would work somewhere hot and dry. Where it would be hard to slow the drying process making the smoke harsh. If I would've waited 2 more days to chop I would have regretted it. The temp jumped 10-15 degrees this weekend to 105°. But now I know what can be done in an emergency.
Glad to see your experiment. Thanks for posting.
Cheers
Californiakid
 
I wouldn't recommend it as an alternative, at least not yet still much testing and process refinement to go before that's even a consideration. As far as emergencies, if I was faced with losing a crop right now and I could save some or all with a quick dry/cure, I wouldn't hesitate at this point to toss it in water.

Also I'd use it anytime I found myself in the situation I am now, lost connection, grow about a month away with a full dry and cure, and determined to stay off pain meds.

It isn't gonna impress anyone, except maybe the "you did what" factor, and with no smell and a non-traditional cannabis taste it isn't gonna sell, but it will do what it needs to do just fine.

Now that I know the potency stays I think this may be a superior way to cure bud for edibles and such. But again, while this does prove the concept, it opens up many more questions.
 
You must log in or register to reply here.
Back
Top