What's new
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

Temp and humidity sensor recommendation

s62

New member
So I just wanted to post about my experience with hygrometers and to make a recommendation. I’ve tried several sensors, and found the bulk of them to be too inaccurate. Additionally, I was looking for something that I could use to track my temperature and humidity remotely. I didn’t like the idea of training a webcam on the sensor display. I wanted something that was designed for mobile display inherently.

Then I found SensorPush: http://www.sensorpush.com
and my search was over.

https://i.imgur.com/Uiqsdvo.png

SensorPush is a small wireless sensor (about the size of a half dollar but thicker) that allows you to check temp and humidity on your phone with the SensorPush app. The sensor itself is about $50, but it is accurate, small, and stupid easy to use. The only limitation with it is that you have to be within Bluetooth range for it to send updates to your phone.
However, they also sell what they call a Gateway for ~$100. The Gateway takes the sensor data and pushes it to the internet so that you can check your temps, etc., on your phone from ANYWHERE. This takes the SensorPush from really good to amazing.
The app is clean and easy to use. The setup is moderately simple. You not only get temp and humidity, but interactive charts that show your history of temps and humidity, as well as visuals showing their spread over time.

https://i.imgur.com/oAwDGWE.jpg

https://i.imgur.com/VpVBI7i.jpg

I know ~$150 is a lot for remote temp and humidity, but if you have the dough, I feel like it’s well worth it. I wanted to share in case anyone was looking for a reliable, elegant solution for monitoring. I’d also love Nebula to check it out and potentially mention it on GWE if she feels it’s a worthwhile addition to the site.
And FWIW, I’m not shilling, just sharing. I’ll be doing some separate posts for other parts of my setup, like my Gorilla tent, but my SensorPush is definitely one of the cooler aspects of my grow.
Finally, what do you all use for your setup? Pros and cons?
 
Last edited:
i use a wireless remote weather station from wallmarr...20$ ,,,,the monitor is small and sits on the table by my recliner, i can check temo and humidity with a glance,,,would be nice to have a Wi-Fi unit so i could check on the grow room while im tokin a big fattie and fishing.
 
I have one of these as well. Glad to hear that you believe it to be accurate. I was able to calibrate the temp but don’t have Boveda calibration packs for doing the humidity sensor.
I had a bunch of erratic readings for a few hours and discovered that the sensor didn’t like being in contact with anything that vibrates (pumps and fans).

Where do you keep your sensor in your grow?

cheers
YYC
 
s62 I have a bunch of Caliber IV hygrometers (recommended by Nebula) for my jars, but nothing remote. Very cool, but what do you do if the humidity gets too high and you're at work??
 
alltatup totally reminded me that I forgot to mention what I actually DO with remote information from my sensor. I run my LEC, a dehumidifier, a heater, and a portable A/C all on Wemo smart plugs. This not only allows me to track electrical usage, but it also allows me to remotely turn any of these devices on/off. That way, if the humidity is too high while I’m at work (I work from home lol), I just hit a button on an app, and bam, humidity in check.
As for jars, these sensors are small and would totally work in the jar, but I wouldn’t bother, as there’s nothing to be done with the data. Can’t remotely burp a jar lol. The Caliber IVs are probably better in this case because they display the data without you needing to check your phone.

YYCannabis I hadn’t noticed this! I mount my sensor at canopy height by using the adhesive pad it comes with on the wall of my tent. No real vibrations or movement there.
 
Back
Top