Ok first off is the bad (I knew it would be high and was already lowering the PH), the PH is 8.4, so I have started reducing that with sulfur and water PHd to 3.5
The next is EC (salts) are in the low range @1051 (optimal 3000-5300)
Anions
Nitrate-N (PPM) <DL*
Sulfate (PPM) 49.1
Boron (PPM) 0.1
Cations
Sodium (PPM) 14.9
Calcium (PPM)164.9
Magnesium (PPM) 26.3
Potassium (PPM) 86
Ammonium-N (PPM) 4.8
Phosphorus (PPM) 4.54
Recommendations; Lower PH using sulfur
I keep sulfur around to use in the gardens, both powder (faster acting) and granular (takes longer, lasts longer), I add some every year!
And I cut in some roots organics uprising bloom, I plan on using a tad bit of black strap in the water, got to feed what feeds the plant!
But what you add (other then sulfur to correct the PH)?
The next is EC (salts) are in the low range @1051 (optimal 3000-5300)
Anions
Nitrate-N (PPM) <DL*
Sulfate (PPM) 49.1
Boron (PPM) 0.1
Cations
Sodium (PPM) 14.9
Calcium (PPM)164.9
Magnesium (PPM) 26.3
Potassium (PPM) 86
Ammonium-N (PPM) 4.8
Phosphorus (PPM) 4.54
Recommendations; Lower PH using sulfur
I keep sulfur around to use in the gardens, both powder (faster acting) and granular (takes longer, lasts longer), I add some every year!
And I cut in some roots organics uprising bloom, I plan on using a tad bit of black strap in the water, got to feed what feeds the plant!
But what you add (other then sulfur to correct the PH)?
