What's new
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

Sitting on some organic fertilizer or, "my plants have my back"

Outer space bucket( or out of space bucket?).
Day's are finally short enough to start plants flowering, and don't want my clones to do that just yet, so decided to build myself a Space Bucket!
 

Attachments

  • photo56701.jpg
    photo56701.jpg
    380.4 KB · Views: 5
  • photo56702.jpg
    photo56702.jpg
    201 KB · Views: 4
  • photo56703.jpg
    photo56703.jpg
    459.3 KB · Views: 4
  • photo56704.jpg
    photo56704.jpg
    574 KB · Views: 4
  • photo56705.jpg
    photo56705.jpg
    513.9 KB · Views: 4
  • photo56706.jpg
    photo56706.jpg
    720 KB · Views: 5
Had these lights in series laying around( that will teach my Dad to leave his shit lay at my house!! :) ) and the lights are hung from the trash can lid. The little chimney commin out the top is cause my dum A cut the hole for different sized fan, then changed my mind. So I butchered up a couple gallon sized pots for a reducer, to fit my 4" inline 100cfm fan. Already had holes around the top of the trash can drilled, from my last mad science project, so I decided to plug the light leaks by through bolting, and then hanging clones from them with clothes line wire. I cut the bottom off the trash can so that I could set it over the one clone i have in the ground, soonly it will outgrow the "Bucket" but at least I should get a little more vedge time this way, make it worth it. I have the bucket up on 2x4 blocks to allow air flow, and then I pushed straw around the bottom to keep more of the light in.

Should go check the thing now that it is dark out, and see if I have light leak problems or not.
At least I was having fun with it, anyway!
 
Just checked, and the light leaks aren't really all that bad, kicked the straw around the base just a little tighter. Think I will have to attack the thing with a little gorilla tape, and maybe make a skirt for the bottom out of a contractor bag.
I have a dark colored tub that coconut butter came in, and I put that over the top of the exhaust fan. The tub is bigger than the fan, so it lets air pass, but is pretty much stifling any light coming out the top. 60 F and 70% humidity in there just now, before I lit off the propane heater in the greenhouse. Bin slowly turning into winter hear after our summer of frying in the heat. I have seen frost on neighbors roofs once already this month.
 
dont say that nasty word Greenhouse I love the grow can if autos are in there why would you worry about light leaks ,I leave the auto room open to the rest of cellar
 
I have photo's next to the space bucket, but I really am not to worried about it, it's no more light than moon beams and street lights. Mostly just trying not to advertise that I grow weed, or at least to much! Finally got a big air scrubber in there( Man, and 8" really is BIG!).

Thanks for looking! I may have messed up the "father" plant for those Feminized CD-1 seeds I am trying to make( Didn't start spraying with coloidal silver early enough), plan B is to try and give a clone or 3 to a friend to try, and maybe I can get a new clone back from him come March. Don't want to run my greenhouse all winter from the energy perspective!
 
My wheels have been turning a bit with the whole big space bucket idea, could be a great way to help start plants out doors, if you can't grow in your house.
Also I have been thinking I will make a big compost pile on top of my Cannabis bed this winter, use plenty of horse manure to get it going hot, then snug this crazy space bucket inside of it for starting my seeds! :D

Fun Ideas to keep the creative juices flowing, anyway, and I have full faith that I will probably do SOMETHING dum soon, to stop myself from feeling smart ( trying to enjoy the joy's of success for now, though, Lol!!)
 
[No message]
 

Attachments

  • photo59054.jpg
    photo59054.jpg
    380.8 KB · Views: 3
  • photo59055.jpg
    photo59055.jpg
    479.3 KB · Views: 3
  • photo59056.jpg
    photo59056.jpg
    447.5 KB · Views: 5
  • photo59058.jpg
    photo59058.jpg
    444.4 KB · Views: 4
  • photo59059.jpg
    photo59059.jpg
    298.9 KB · Views: 2
  • photo59060.jpg
    photo59060.jpg
    486.5 KB · Views: 2
  • photo59062.jpg
    photo59062.jpg
    655.9 KB · Views: 7
  • photo59063.jpg
    photo59063.jpg
    295.6 KB · Views: 5
  • photo59064.jpg
    photo59064.jpg
    369.6 KB · Views: 4
Bud picks.
 

Attachments

  • photo59065.jpg
    photo59065.jpg
    345.6 KB · Views: 4
  • photo59067.jpg
    photo59067.jpg
    376.2 KB · Views: 4
  • photo59068.jpg
    photo59068.jpg
    381.9 KB · Views: 4
  • photo59069.jpg
    photo59069.jpg
    398.1 KB · Views: 6
  • photo59071.jpg
    photo59071.jpg
    400.8 KB · Views: 6
  • photo59072.jpg
    photo59072.jpg
    438.7 KB · Views: 4
  • photo59073.jpg
    photo59073.jpg
    559.4 KB · Views: 4
  • photo59074.jpg
    photo59074.jpg
    486.8 KB · Views: 6
  • photo59075.jpg
    photo59075.jpg
    590.7 KB · Views: 2
  • photo59076.jpg
    photo59076.jpg
    472.8 KB · Views: 4
  • photo59080.jpg
    photo59080.jpg
    355.7 KB · Views: 4
Well, things are actually going alright. Got a little worried about yellow leaves this week, but have decided that it's cause my plants are basically getting pot bound. The raised bed there in I think is mostly all roots and earthworms, and a little soil at this point! So I fed them, real good like. A little fish emulsion on the ones that looked hungry fore more N, and then I did one with just plenty of molasses in the water, man, that actually did a lot, just a full bottle of molasses in 80 gallons of water, what Daas and kingfish say about molasses, is no shit!! This morning I got them with 10 pounds of worm castings, and a bottle of molasses that I bubbled for 2 day's, they seemed to really like that. Buds on the jack Herer are starting to feel pretty firm now, and getting a few pistols turning on all the strains.
 

Attachments

  • photo59620.jpg
    photo59620.jpg
    567.9 KB · Views: 6
  • photo59622.jpg
    photo59622.jpg
    500.3 KB · Views: 5
  • photo59623.jpg
    photo59623.jpg
    648.3 KB · Views: 4
  • photo59635.jpg
    photo59635.jpg
    474.3 KB · Views: 4
  • photo59635.jpg
    photo59635.jpg
    474.3 KB · Views: 4
  • photo59637.jpg
    photo59637.jpg
    464.7 KB · Views: 4
  • photo59638.jpg
    photo59638.jpg
    431.4 KB · Views: 4
  • photo59639.jpg
    photo59639.jpg
    433.4 KB · Views: 5
  • photo59640.jpg
    photo59640.jpg
    370.8 KB · Views: 5
  • photo59641.jpg
    photo59641.jpg
    608.8 KB · Views: 5
  • photo59642.jpg
    photo59642.jpg
    635.2 KB · Views: 2
Thanks Ojh.
The "Walrus" Ha ha ha ha!
It is actually just a piece of egg crate mattress foam, left over from making the muffler for my carbon scrubber fan. I had a big piece left, so I wrapped it around the fan, to make it a little quieter. I was a little concerned at first that I might over heat my fan, but it seems to be fine. Guess it's just all the airflow going through the thing, must be keeping it good and cool.
 
Lola, and the clone army. She, ( ahem, he, um?....) is a clone from my feminized Bubble Gun Pro by Victory seeds, I hermed her with some colloidal silver earlier this fall, and rubbed a little pollen on two buds from the mother plant. Maybe I should have tossed her after, but since I'm a nut job,( and have a very soft spot for plants, specially weed ones) gonna re-vedge and try to keep her around this winter. Really want some offspring from that plant!!! Moma is growing some colas that I think will fill a jar after trimming and curing, smell like strawberys and bubble gum, smell kinda sends me to the moon, so hence my love affair with my dear sweet Lo La!
 

Attachments

  • photo61009.jpg
    photo61009.jpg
    405.3 KB · Views: 4
  • photo61010.jpg
    photo61010.jpg
    373.7 KB · Views: 3
Buds are still truckin' a long.
 

Attachments

  • photo61011.jpg
    photo61011.jpg
    448.4 KB · Views: 3
  • photo61012.jpg
    photo61012.jpg
    308.5 KB · Views: 3
  • photo61013.jpg
    photo61013.jpg
    392.5 KB · Views: 4
  • photo61014.jpg
    photo61014.jpg
    334.2 KB · Views: 3
  • photo61015.jpg
    photo61015.jpg
    407.7 KB · Views: 3
  • photo61016.jpg
    photo61016.jpg
    456.5 KB · Views: 4
  • photo61017.jpg
    photo61017.jpg
    431.8 KB · Views: 4
  • photo61018.jpg
    photo61018.jpg
    548.6 KB · Views: 4
  • photo61019.jpg
    photo61019.jpg
    273.6 KB · Views: 4
  • photo61020.jpg
    photo61020.jpg
    564.5 KB · Views: 4
  • photo61021.jpg
    photo61021.jpg
    322 KB · Views: 6
  • photo61022.jpg
    photo61022.jpg
    359.9 KB · Views: 4
  • photo61023.jpg
    photo61023.jpg
    422.9 KB · Views: 4
Thanks OJH :)
No, I got it running into my tea Barrel, I have been mixing earth worm castings and molasses in there the whole grow now, and they really seem to love it!!
Thinking I may have to let them go for 3 more weeks, since I am going to have to leave for 2 weeks this month ( God, scary, I timed that poorly!) Think I will feed them castings cor one more week, then molasses only the last two weeks.

Feed back on Triches is def welcome from all! Kinda want to harvest a few buds in case the worst happens while I'm away. The CD-1 may actually be getting there?
 
Well, crap.
I've been keeping a sharp eye out for this problem, and saw one sugar leaf that was turning yellow and looked out of place compared to the normal late stage yellow fans. Sure enough, just a little bit of botrytis on the base of the leaf. Chopped the bud asap, tossed the top portion, and carefully looked through the bottom part, and hung it to dry.

Think I am going to start harvesting all the biggest colas after work today :(.
I think I am at least close enough to have some decent bud if I give em a good long cure, the tester I tried yesterday was actually pretty good, nice hit of Euphoria, which is what I was after with the bubble gun pro strain :)

Hey, am I doing it right to pitch the top of a bud, and keep everything BELLOW the spot of bud rot??

Thanks for looking, and I will post more pics later.

GH
 
Good news! Harvested one big cola after I got home from work, and no bud rot, checked carefully inside all my biggest colas, some yellow single finger leaves, but no more bud rot. Watching them like a hawk, and have all three DH's going, along with my propane heater. Been cold and rainy, just what every grower wants near harvest....
 
I did end up chopping my most ready colas on the CD-1. I think it was quite a bit ahead being a re-vedged plant, and getting a lot of amber triches, with not to many clear ones, so everything that was dense, got clipped.
 

Attachments

  • photo61479.jpg
    photo61479.jpg
    466.8 KB · Views: 4
  • photo61480.jpg
    photo61480.jpg
    536.8 KB · Views: 3
  • photo61481.jpg
    photo61481.jpg
    414.2 KB · Views: 4
  • photo61482.jpg
    photo61482.jpg
    479.5 KB · Views: 4
  • photo61483.jpg
    photo61483.jpg
    362.5 KB · Views: 4
  • photo61484.jpg
    photo61484.jpg
    736.3 KB · Views: 2
Curing, randos, and the last pics are the Jack Herrer.
"The waiting is the hardest part."
 

Attachments

  • photo61485.jpg
    photo61485.jpg
    369 KB · Views: 5
  • photo61486.jpg
    photo61486.jpg
    617.6 KB · Views: 3
  • photo61491.jpg
    photo61491.jpg
    344.7 KB · Views: 4
  • photo61492.jpg
    photo61492.jpg
    371 KB · Views: 4
  • photo61493.jpg
    photo61493.jpg
    335.3 KB · Views: 4
  • photo61494.jpg
    photo61494.jpg
    421.6 KB · Views: 2
  • photo61495.jpg
    photo61495.jpg
    357 KB · Views: 4
  • photo61498.jpg
    photo61498.jpg
    368.9 KB · Views: 2
  • photo61498.jpg
    photo61498.jpg
    368.9 KB · Views: 5
  • photo61500.jpg
    photo61500.jpg
    352.1 KB · Views: 4
  • photo61501.jpg
    photo61501.jpg
    448 KB · Views: 5
Back
Top