What's new
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

HYDRO Project Blueberry

UndergroundFarmer

New member
I've essentially finished the RDWC setup for my old 3'x3' tent. I only need to make holes in the tops of the lids and cut air lines now. I also need to find or make some kind of shelf for the air pump to sit upon. The four boxes at the corners will be for plants, reservoir is front and center and the box at center rear is only there to hold the air pump above water level. I'm holding off making the holes for net pots because I haven't decided to go with 3" pots (which I already have plus a 3" hole saw) or 6" pots to match the net pot lids from my other RDWC setup.

The first part of the name Project Blueberry comes from the fact that I leaned in to grab a bag of grommets off a shelf and managed to cut my forehead open on a quick-grip clamp I had conveniently gripped to a 4x4 post. It isn't a project until you bleed on it! The Blueberry part on the name is for the the Blueberry clones I hope to take in July after my Blueberry mom in coco (which I forgot to get a recent picture of ) recovers from misfeeding. I think I have it nailed down to phosphorus deficiency and possibly nute burn from more nitrogen than it likes. I mixed up a batch of nute water from a gallon of distilled with CalMag added then a light dose of Aurora Soul Bloom and Soul Infinity up to a TDS of about 500 and pH of 6.0. I flushed it with pHed water twice since last weekend before this feed. If Blueberry hasn't recovered enough by mid-July, I might just have to pop some seeds from other strains and grow those out while I try to figure this finicky thing out. I'm a bit encouraged by one grower on another forum mentioning that the fussy eaters make the best bud.

Has anybody else out there struggled with Blueberry indoors? I'm open to suggestions. The mom-to-be is in coco and the clones will be grown out in hydro. Currently the oldest leaves on the mom are fine including the first pair of leaves from its seedling days. All new growth turns brown at the tips, creeping up the whole leaf and causing it to turn down and slowly die. The newest growth has brown tips but isn't too bad (yet). I think I might have stopped the decline and will know for sure by next week if she can make healthy new leaves by then. I am trying to feed her as though she is in flower to see if that gives her enough phosphorus to satisfy her.
 

Attachments

  • photo108126.jpg
    photo108126.jpg
    2.6 MB · Views: 1
  • photo109140.jpg
    photo109140.jpg
    1.5 MB · Views: 3
  • photo109141.jpg
    photo109141.jpg
    1.3 MB · Views: 1
  • photo109142.jpg
    photo109142.jpg
    1.3 MB · Views: 2
I decided that I could control my sick Blueberry plant's fate better in hydro. I stayed busy all weekend getting this new setup running. The only leaks to fix were all cured by using hose clamps over the tee fittings for the irrigation lines. My Blueberry plant seemed stagnated in coco so I banked on my experience moving clones from coco to hydro to see if I could break her out of her funk. I put her in a solution at .7 EC or just under 400 TDS to get her adjusted to hydro life. So far, no shock and new growth seems to be continuing slowly. If it wasn't for her still putting out new leaves, I probably would have junked her and moved on. I did go ahead and start my last two Blueberry seeds germinating and will add them once they are big enough. After four weeks, the nicest one gets cloned and then flowering will start. I added elbows at the ends of the irrigation tubing to prevent dribble back. That's where the nute water clings to the tube and runs back through the grommet to the floor. It happens when the tubing is pointed upward or even level. I've had to turn the tubes in the 4'x4' setup to keep them from doing that. How was y'all's weekend?
 

Attachments

  • photo110228.jpg
    photo110228.jpg
    2.4 MB · Views: 1
  • photo110229.jpg
    photo110229.jpg
    1.8 MB · Views: 1
  • photo110230.jpg
    photo110230.jpg
    2 MB · Views: 1
  • photo110231.jpg
    photo110231.jpg
    1.9 MB · Views: 1
  • photo110232.jpg
    photo110232.jpg
    2.3 MB · Views: 2
  • photo110233.jpg
    photo110233.jpg
    2.1 MB · Views: 1
  • photo110234.jpg
    photo110234.jpg
    2 MB · Views: 1
Today, I added in two newly hatched Blueberry seedlings to the tent! Their older sister seems to be perking up in her new situation too! The newer not-so-damaged leaves look firm with new stuff about to burst out. I also started another freebie seed for spot #4 - a Sweet Zombie from Expert Seeds.
 
Less than a week after being transferred from her coco hell, Big Sister Blueberry is sporting new growth! She also seems to be more readily dropping the worst of her damaged leaves. Her baby sisters were helmet heads for about five minutes. Today, the mason jars came off after I found that both of them had tap roots into the nute solution. I like having the airstones that I never used before. The popping bubbles do such a good job of keeping the bottom of the net pots moist!


And that's not all! There is now a fourth member of the tent - a Sweet Zombie from Expert. I started her Tuesday and transferred her from the wet paper towel in a Chinese takeout box to a rooter plug this afternoon. I'm hoping that having a slightly heavier feeder in the mix will help in case I overfeed a bit. I'm running the EC at .8 (seedling strength - 400 ppm TDS) until I see a slowdown in growth. pH is rising during the day and has to be knocked down every afternoon when I get home. I have two clippy lights over the babies to discourage them from stretching.
 

Attachments

  • photo110579.jpg
    photo110579.jpg
    2.4 MB · Views: 1
  • photo110580.jpg
    photo110580.jpg
    1.1 MB · Views: 1
  • photo110581.jpg
    photo110581.jpg
    1.5 MB · Views: 1
Wow what an improvement on the leaves health!!!
Ive never tried Hydro. but now, i really want to! :D
 
After a very busy weekend, Big Sis and the seedlings are all doing fine. I'm still holding the TDS at 400 or less until the little ones get some size. Big Sis is producing more leaves than ever while dropping one or two bad ones every day. More Blueberry is on the way. I ordered Dutch Passion's BB in regulars so I can grow out some bud for seed saving. I've also got some Ghost Train Haze regulars on the way for a similar project. There will be feminized Romulan too plus some BC Tuna God regulars as a freebie. I'm hoping the smoke from seeded bud isn't too disappointing. Even if it is, I damn sure know what to do with disappointing bud!
 
Project Blueberry's tent inherited its LED panel back from the 4'x4' tent after that one's new panel came this weekend. So now both flowering tents will have something better than T5s to grow under. During the week, both seedlings damped off and died, were replaced by a couple of too-hastily taken clones from big sister. I think it was Gingerbeard who said lately that cloning in rooter plugs sucks. (Nope. It was @JDU) He's right. They work for starting seeds in hydro but not this. I should have waited to get the aeroponic cloner running before cutting anything off her. Those two cuttings wilted. They are now in the cloner anyway along with two fresh ones from big sister. The cloner is running like a champ - those cut yesterday are doing fine alongside Acapulco Gold, Purple Haze & Laughing Buddha. I had to stop myself from taking more than I needed again after realizing that their moms needed to be cut back big time if I was to keep them healthy. I could have made a half-dozen clones from each mom!

I trimmed off the most sickly leaves from big sis now that she is growing so well now. I usually just let the plant do it but there were just so many with nothing much to contribute except necrosis. It's so funny how every time I've changed over from fluorescent to LED how the plants' reaction is so immediate. The Sweet Zombie seedling is under a clippy light but turned away from that to face the LED panel instead. Big Sis also put her growth into another gear once the change happened.

Fingers are crossed hoping to have two healthy Blueberry clones in the empty pots by next weekend!
 

Attachments

  • photo111591.jpg
    photo111591.jpg
    1.6 MB · Views: 1
  • photo111592.jpg
    photo111592.jpg
    1.9 MB · Views: 2
Last edited:
The Black Zombie seedling laid over yesterday! I moved her to coco in a solo cup to try and save her but it looks like root rot might take her. Those litter buckets are too translucent to use under strong lights so I believe I'm going to be painting them this weekend. I dosed the water with hydroguard just to be on the safe side with big sister Blueberry - who is still looking better every day.
 
Yesterday evening was spent disassembling the RDWC setup and giving the buckets a PDQ panda paint job because after losing three seedlings I start to catch on! I couldn't bear to lose my one rooted Blueberry plant so I made the call to not wait for Saturday morning. I feel pretty stupid for not realizing they were too translucent to use without doing something to block out the light from the roots. Ironically, everything only went to crap after I moved my first LED panel back into this tent in place of the T5 panel. I even put some clippy lights over the seedlings to keep them from stretching. Looks like they sure did that! Now I just need those cuttings in my cloner to please hurry up and root - it's been almost a week, kids.

Big sister is no worse for her ordeal. I set her up in a leftover black bucket from my failed attempt at a RDWC setup with some nute water she was in plus bubbles from an aquarium pump that was too weak for my purposes until last night when I only needed one airstone going. This morning she even seemed a bit perked up so there's that. There's also some consolation in the tent next door because there are stem-snapping buds about two weeks from harvest to drool over!

Sorry for no pics - last night was frantic.
 
That would have been better if I had painted them with that in the building stage. I just grabbed two cans each of cheapo flat black and gloss white.
 
Back
Top