Campesino
Banned
I am talking about max acceptable EC or PPM for your run-off. You can increase quantity of run-off all you want (it's just wasteful), and you don't need to measure or be super-precise about the amount as long as there is "enough".
You set an inflow target, and working in PPM, your run-off Max should be about 200 points higher than that in PPM. It looks like you are targeting about 700 for inflow, so this means that you max outflow would be 900. So, try to keep run-off below 900 by increasing frequency of fertigation events or quantity applied during events. If that becomes impossible, you may need to lower the PPM of the inflow.
Let me know if you have any questions!
Really happy that your plants are loving it
You set an inflow target, and working in PPM, your run-off Max should be about 200 points higher than that in PPM. It looks like you are targeting about 700 for inflow, so this means that you max outflow would be 900. So, try to keep run-off below 900 by increasing frequency of fertigation events or quantity applied during events. If that becomes impossible, you may need to lower the PPM of the inflow.
Let me know if you have any questions!
Really happy that your plants are loving it