What's new
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

New Grow room

set back yesterday my son asked me to help him put in 9 sunna tubes for a shed hes getting . so I stopped mudding at 7:20 cleaned up tools and headed out to home depot to meet him. holy crap what a bitch he even rented a tow behind auger . his builder pushed every rock in new England to the back of his property lol. we couldn't dig more 10 inches then it was all by hand ,ended up getting the auger back at 7 30 last night. the upside of it was that it was cheaper for my son to purchase 42 bags rather than the 36 he needed so I said get 50 I can use them ,so I have 15 80 lb bags of cement to pour for a floor in the new room, he rented a mixer as well we didn't finish setting all the tubes and we still need to fill them but he has to work until 1 pm so I have this morning to use the mixer and pour my floor /It will only be about an inch and a half but thats thick enough for my needs. :big-smile:
 
I've heard you mention limpin louie before that must be some good stuff OJH, how long does it take to grow ?? Awesome grow facilities your building. Good Luck with it all Jarhead.
 
According to Local 13 skipping doobie breaks is permissible when building an awesome grow room in order to facilitate future doobie breaks.

Section 5 Subsection 3 Paragraph 5
 
No Title

Limpin Louie is a cross between budda tahoe and big bud it was not intentional lol but it is pretty good stuff. I like the flavor and the high.well the floor was done by 930 so I had a chance to cut one of the girls down this is a before and after picture of a stem that had rot on it . I did a wet weigh I got 231 grams of good bud and 189 grams of bud with rot on it ,I dont know if or how it will work but I put it my next hash supply. what a shame . and yes I did all the harvesting on my Patio and what a pleasure cool breeze good tunes and bud to trim great morning
 

Attachments

  • photo27491.jpg
    photo27491.jpg
    1.8 MB · Views: 0
  • photo27492.jpg
    photo27492.jpg
    2 MB · Views: 1
  • photo27493.jpg
    photo27493.jpg
    1.7 MB · Views: 0
I believe it is very specific in that it must contain THC or cbd and is strongly encouraged. But GanjaGed has them all committed to memory so maybe he will weigh in.
 
autos are on the way from seedsman I have 7 clones of gorilla/bomb that I'm going to manifold, sheet rock is done and I will paint this morning ,I installed the fresh air fan, the exhaust is done, the floor came out great debating if I should paint it as well. I've got two 16 inch wall fans with speed controllers sitting in front hallway to install. I Love it when a plan comes together
 
Man, you been putting in work ojh! Looking good!

I had my first experience with mixing cement products this winter when I remodeled my bathroom. Had to build the shower pan with mortar. I have to say, I probably enjoyed that part the least lol. Still working on it actually, all I have to do is paint the walls and put a countertop and sink on. It's taken way longer than I expected, but I'm getting there!
 
If you didn't layout plastic (vapor barrier) below the concrete I would not recommend you paint it and if you did and the concrete is 2" thick you should let it cure (dry) for 2 months. If not the paint will likely bubble due to vapor transmission.
 
wow good info Tazard I didn't know that .Mcubed when my wife moved in I explain to her I would do anything she wants to the house but That there were no such thing as ten minute jobs in a 200 year old house, everything takes longer than you think because there are no square points you have to make it square as you go lol .you just have to keep plugging do something everyday and you'll get there . do it yourself give you such a reward at the end(fn grey hairs during) lol. so I got the first coat of paint on the walls and ceiling,I have to pick up a can of that expanding insulation to fill in around the steam pipe in back of room ,I blocked it as best as I could but its not air tight and thats what I'm trying to do for co2 use
 
Definitely. I have never done remodeling before my bathroom, so I researched for about a year before I attempted this. Since it was my first time, all my walls weren't perfectly square, so my corners took forever when cutting tile. It was a pain in the ass but lesson learned lol.
 
No Title

it took 3 coats but I think its white the forth picture is in the room with lights off and door closed the little light you see is though one of my outlet boxes that will have a cover and draft blocker so that should take care of the leak there I have to do something about the bottom of the door and the fresh air intake . ready to start installing stuff but alas I can't do anything until Monday Powwow this weekend
 

Attachments

  • photo27675.jpg
    photo27675.jpg
    1.8 MB · Views: 1
  • photo27676.jpg
    photo27676.jpg
    1.8 MB · Views: 1
  • photo27677.jpg
    photo27677.jpg
    1.7 MB · Views: 1
  • photo27678.jpg
    photo27678.jpg
    1.5 MB · Views: 1
Back
Top