What's new
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

HELP! MOLD! 10-14 days from ideal harvest. What to do???

rangerjake

New member
I posted another thread here about a chem contamination and effects/progress of my plants. While things have been generally smooth sailing (besides the accidental contamination) we have been in a recent pattern here in N. VT. of cool wet weather (55/40, cloudy and damp). This weather trend looks to continue for another couple days before some sunny/partly sunny days and temps climbing back up into the mid 60s.

We found a small spot of mold about 10 days ago and clipped it out of one bud. Today we have found a fair amount more. Below are some photos of the mold we have cut out, including a few sizable chunks of flowers removed. Also are photos from each plant of where the showcase flowers are at (getting pretty close) and where some of the less developed smaller flowers are at (maybe a week behind). The locations of mold seem to be exclusively in the further along flowers, which could allow for an early harvest of those and letting the non-mold smaller flowers more time to develop.

Looking for some guidance on how best to protect these plants from more mold while allowing the flowering process to complete to the optimal harvest window.

Other ideas we had:
Neem oil
moving plants inside at night to a drier room w/ dehumidifier
partial harvest of flowers which are further along

Thanks for any input!
 

Attachments

  • photo61063.jpg
    photo61063.jpg
    696.4 KB · Views: 0
  • photo61065.jpg
    photo61065.jpg
    578.4 KB · Views: 0
  • photo61064.jpg
    photo61064.jpg
    992.5 KB · Views: 0
  • photo61067.jpg
    photo61067.jpg
    788.1 KB · Views: 0
  • photo61066.jpg
    photo61066.jpg
    824.4 KB · Views: 0
  • photo61068.jpg
    photo61068.jpg
    663.6 KB · Views: 0
  • photo61069.jpg
    photo61069.jpg
    766.5 KB · Views: 0
  • photo61070.jpg
    photo61070.jpg
    731 KB · Views: 0
  • photo61071.jpg
    photo61071.jpg
    848.5 KB · Views: 0
  • photo61073.jpg
    photo61073.jpg
    616.4 KB · Views: 0
  • photo61072.jpg
    photo61072.jpg
    818.7 KB · Views: 0
  • photo61074.jpg
    photo61074.jpg
    762.9 KB · Views: 0
  • photo61076.jpg
    photo61076.jpg
    904.6 KB · Views: 0
  • photo61077.jpg
    photo61077.jpg
    962.9 KB · Views: 0
  • photo61075.jpg
    photo61075.jpg
    882.1 KB · Views: 0
It sounds like from Nebula's write up on this that my best bet is taking the plants down right away. I am curious if anyone can speak to removing large sections of a plant (the bigger, denser, further along colas which are in a good harvest window) while leaving some of the lower smaller buds to hopefully use their airier spaces to persevere through to some warmer drier weather in a couple days and get a little further along before also getting cut.

Any thoughts greatly appreciated!
 
I have done that and seen it done as well. If you leave enough (strain dependent) green on bottom, and only remove the tops... she can reveg.
 
rangerjake , that mold ,bud rot, is ruff, stuff.
But yeah, you can cut what's ready, and leave the others to get done.
Good Luck with them, I know that makes you sick.
But I would sure bring them inside.
 
Back
Top