What's new
By:
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

Making vape oil. RSO and VG won't mix. ???

TjckTock

TjckTock

New member
For fun, I decided to try making some vape oil from some Sundae Driver RSO I had made. (I know there is too much plant material in RSO and it is not great for smoking but I just wanted to try) The thing is, I could not get it to mix with the VG. I heated it up, stirred it but it would separate when left to sit. RSO on top and VG on bottom. From what I read, VG and PG are the two main things mixed with *pure* cannabis oil to make vape oil. I didn't have any PG, though. Was my mistake trying to use pure VG or something else? Anyone here have good experience making vape oil from home grow?
 
The best way to make vape oil is to buy it. There are processes that you can't replicate without special equipment and knowing what short path and fractional distillation are.
THC cartridges should not have VG or PG. Nicotine cartridges have them. There is enough gunk in RSO that it will not mix well with anything but alcohol. The gunk will also gunk up heating elements, making them pretty much worthless. I tried making juice with store bought wax. Good stuff. Wasted every bit of it because it wouldn't mix.
On a trip to BC, and before I knew what it was, I was smoking hand rolled cigarettes that had been brushed a line of RSO. Got me so messed up and I didn't know why. Same-same for joints
If your RSO is decarbed, eat it.
 
That is the lazy extractor's way out, and it's a logical impossibility. You either make it yourself or you don't. You're being abstruse. Yes, the word from Shawshank.
 
I have no idea what you said, lady. Go smoke some Sativa to get your brain working. Go get another tattoo. Flip the page on your calendar and tell me what the word for tomorrow will be. I'll use it in a sentence, for you.
Would you call me a lazy extractor? I know what I am talking about. The only weed product I have not dabbled in making is distilled vape juice because of what I said in my post. I've tried the PG VG route. Even followed instructions!
Really. Sativa.
 
Gingerbeard said:
The best way to make vape oil is to buy it. There are processes that you can't replicate.../QUOTE]

Not sure if this was your intention but now I am even more determined to figure it out. The best way to get me to do something is tell me I can't. ;-)
Click to expand...
 
Puyr, a wax thinner. No pg or vg, a hemp oil derivative. But you still have crappy carts with rso. Even heating and properly thinning a concentrate just isn't the same. Make oil, evap the etoh, do dabs would be my suggestion. I messed with carts a couple of years ago. If you make oil at least you can decarb and make edibles if nothing else.
 
First off, props to you for experimenting with your own homegrown - that's some next-level stoner creativity! But yeah, RSO can be a bit tricky to work with because of all the plant material. So here's what I've found works for me: try using a 50/50 mix of VG and PG. I know you didn't have any PG, but it really helps with the mixing process. If you can't find PG, you can try using some MCT oil as a substitute. And yeah, as I recently discovered, Kingpen. I've heard many people say that it even works with homemade CBD. Do you know anything about that?​
​
 
Last edited:
Hey there! It sounds like you had an interesting experience trying to make vape oil from your homemade RSO. From what you've mentioned, it's possible that using pure VG instead of a mixture of VG and PG could have been the issue. PG has a lower viscosity than VG, which can make it easier to mix with the RSO. Additionally, using too much RSO or not heating the mixture enough could also cause separation.

If you're looking for more tips on making vape oil from home grow, I'd suggest checking out some online forums or communities where people share their experiences and methods. You could also try experimenting with different ratios of VG and PG to find what works best for you. Good luck with your next attempt!

​
 
TjckTock said:
For fun, I decided to try making some vape oil from some Sundae Driver RSO I had made. (I know there is too much plant material in RSO and it is not great for smoking but I just wanted to try) The thing is, I could not get it to mix with the VG. I heated it up, stirred it but it would separate when left to sit. RSO on top and VG on bottom. From what I read, VG and PG are the two main things mixed with *pure* cannabis oil to make vape oil. I didn't have any PG, though. Was my mistake trying to use pure VG or something else? Anyone here have good experience making vape oil from home grow?
Click to expand...

You can get PG from a compounding pharmacy. The times I have asked they wanted to know why I wanted so much, so I told 'em I was making vape liquid. They wouldn't sell it. ;)
So look up some actual uses and tell them that. The pharmacists refused to sell to me for vapes.

Owned/operated a vape shop for a long time, and VG is popular. Most of the other vape shop owners love it as well. Because it gunks up atomizers fairly fast and then you gotta go buy more atomizers.
;)

Good luck!
 
I ran into this problem a few years ago and found out there are several types of PG. You need a mixture of PG 200 and 400. Best way to get that is buying a ready to use product intented for dissolving rso into PG. Can't remember the name but they exist. Google it
 
Y' know. I reread the title of this post. RSO is not mixing with VG/PG. I don't think they do. RSO is too 'dirty.' The stuff they put in vape pens is super clean. If you were to get them to mix, the juice would be very diluted and clog coils on the first vape. If you can't see through the juice, don't vape it.
If you buy a cartridge, read the label. Some contain VG/PG. The good ones are pure distillate.
 
VG is pretty thick and can have trouble combining with other substances. Since you didn't have any PG (Propylene Glycol), which is thinner and often used to aid mixing, you ran into this issue.
Have you considered trying some premium e-liquids that are already well-mixed? Brands like IVG offer a range of flavors and the PG/VG balance is professionally calibrated. These are formulated to work well in various vaping devices and might save you some of the trial and error.

That said, if you're committed to DIY, you might want to get some PG and try a 50/50 mix of PG and VG to see if that resolves your issue. PG will not only help with mixing but also carries flavor better, so you might find the end result more to your liking.​
 
Last edited:
You must log in or register to reply here.
Back
Top