What's new
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

Led lighting

Wondering if my 1500w led grow light is enough for a 4X4X80 grow tent, or should i need two

You will need to see if the fixture lists the actual power draw.
If it's an older 'blurple' fixture, then a simple metric for HID lighting and older tech blurple diodes would be 50 watts/sq ft of canopy.
That's the amount of power you'll need to achieve adequate light levels.
When you step up to current-tech diodes like the lm301h, you can achieve the same light level @ 30 watts/ sq ft.
So, for your example a 4x4 will need 800 watts of blurple leds or 480 watts of top-tier diodes.
 
Thanks for a very detailed comment, written on label 250w newest model, plants are 4 Bruce Banner auto feminized (first grow) in 10gal fabric pots, in promix. I almost lost them in my incubator (may have let them to long, 2 or 3 days). So I panicked a bit, all is good now, but I guess the real question is should I buy another light later in the flowering stage, the manufacturer says only that the core coverage form 18" to 24" is only 2.5 feet by 2.5 feet. 24" (750umol/ms )and 18" (812ms)
 
If I buy Bloom plus 3000w (manufacturer says 600w hps/md) and my 250w cheap 0ne i should be good right for my 4x4 grow tent.
Amazon search:
B082XY8B75 (3000w led)
B075SRHWQP(1000w led)
 
Last edited:
Well, l apologize, l have finally bought a 1000w hps/mh, but I will keep my led light, could I use a 1500w (250w really)led light to keep a mother alive for cloning, I would like to thank everyone for your help.
 
Thanks guys, the grow is doing fine at 11 days from germination, I think it's going well
 

Attachments

  • photo124394.jpg
    photo124394.jpg
    2.7 MB · Views: 2
Back
Top