What's new
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

Kight Burn or Nitrogen Deficiency?

BR2K

New member
I meant "Light" burn, oops. I suspect my LEC and 60 inch ceiling may be too much for the plants. But I'm feeding them at seedling strength. Thoughts?
 
Last edited:
BR2K if it was knight burn lol it would be on the top leafs this is lower so I would suspect its root issues try transplanting them to bigger pots the recommended distance for my LEC is 15 inches if I had them over seedlings I would start at 20 inches and work my way down from there good luck
 
BR2K if it was knight burn lol it would be on the top leafs this is lower so I would suspect its root issues try transplanting them to bigger pots the recommended distance for my LEC is 15 inches if I had them over seedlings I would start at 20 inches and work my way down from there good luck

oldjarhead100 - You hit the nail on the HEAD!! I have all of them transplanted. One curious factoid: Although I watered all four of them relatively prodigiously yesterday, my small dark plant coco-coir was dry and fell apart.

They've been on a 24 on 0 off schedule. I'm going to 18/6. My 315W LEC light is adjusted to 20" and I'll see how they like it.

Thank you for your guidance!!!!
 

Attachments

  • 20200313_093827.jpg
    20200313_093827.jpg
    2.1 MB · Views: 6
hey br2k,

i've a 315W ceramic light.
seedlings, i have that light 3 ft away.
as they get older, 2ft from the canopy.

looking at the bottom leaves, i think indeed too little N, maybe a bit light on P as well.

up N, up P i'd recommend, maybe try nutrients at 3/4 strength as appropriate for age?
 
Those 315s are great lights ,I think those few lower leaves, were from something else, like jarhead said, the new growth looks great.
20-22inches should be fine, when mine started flowering I dropped mine down to about 15inches.
GoodLuck with them, an have fun.
BR2K
 
do you have an ec and ph meter If i used what the manufacturer suggested my ppm would be around 5000 so I would be careful to not give to much
 
Back
Top