Hey everyone, I sincerely want to thank every single one of you for reading this, and if you can give any advice that would be extremely helpful!
I am a super noob at growing cannabis, currently, I am growing (Grease Monkey) using hydroponics, DWC system, using General Hydroponics Nutes, Calimagic, Hydroguard & Great White for root rot control, and they are month 3 in vege growing super strong and I want to take 7-8 clones before I turn into flower.
I have Clone King, which is an aeroponic cloner with 32 sites and I want to take an attempt cloning with this cus I did hear a lot of good things about aeroponic cloners. (I built my dwc system with parts but I didnt want to build my own aeroponics cus I want it as close to 100% as possible)
So, I have few questions, I really want these 7-8 clones to root, possibly within 2 weeks, and I want to make it perfect as possible!
1. I am going to try to maintain 68-72 degrees using IceProbe Thermoelectric Aquarium Chiller. This apparently chills pretty well especially I only need it for 2-3 gallons of water inside the cloner, so I think this would keep it 68-72 degrees no problem. Any ideas about this because I don't have any better option in terms of money spent than going with this one here.
2. Some sites and forums suggest using hydrogen peroxide or chlorine inside the water to keep the bacteria off bay. I do have hydroguard and great white which i use them to keep the bad bacteria off bay, Do I use hydroguard or greatwhite in the water? Or do I go with hydrogen peroxide or chlorine route. Can I just use tap water (which has chlroine in it) and switch water out maybe every 2-3 days? What are your suggestions regarding the water solution at the beginning? Once I do see roots then I can add in clonex solution or rapid start and give them some food but is it necessary to add nutes from the start? What is the best PH range?
3. Is there anything I should feed the mother plant more of before taking clones? Some say to use more bloom nutrients with Phosphorus, I need more info on this.
For the cuttings (5-8 inches) I am going to use clonex gel, cut the leaves 1/3, and stick em inside the cloner as soon as possible while its running.
What timer do you run in the aeroponics? 5min on 5 min off? 15 min on 15 min off?
Please let me know how to make this happen, I really need clones to root as I dont want to fail, I put in massive investment trying to root them close to 80-100% I dont mind even 50% success at this point. Thank you all and I appreciate any advice!
*The pictures show branches of few possible clones, they are only 3-6 inches long, I am going to wait until they are 5-8 inches long which is probably in the next week or 2*
*its branching out cus I fimmed it at the top*
I am a super noob at growing cannabis, currently, I am growing (Grease Monkey) using hydroponics, DWC system, using General Hydroponics Nutes, Calimagic, Hydroguard & Great White for root rot control, and they are month 3 in vege growing super strong and I want to take 7-8 clones before I turn into flower.
I have Clone King, which is an aeroponic cloner with 32 sites and I want to take an attempt cloning with this cus I did hear a lot of good things about aeroponic cloners. (I built my dwc system with parts but I didnt want to build my own aeroponics cus I want it as close to 100% as possible)
So, I have few questions, I really want these 7-8 clones to root, possibly within 2 weeks, and I want to make it perfect as possible!
1. I am going to try to maintain 68-72 degrees using IceProbe Thermoelectric Aquarium Chiller. This apparently chills pretty well especially I only need it for 2-3 gallons of water inside the cloner, so I think this would keep it 68-72 degrees no problem. Any ideas about this because I don't have any better option in terms of money spent than going with this one here.
2. Some sites and forums suggest using hydrogen peroxide or chlorine inside the water to keep the bacteria off bay. I do have hydroguard and great white which i use them to keep the bad bacteria off bay, Do I use hydroguard or greatwhite in the water? Or do I go with hydrogen peroxide or chlorine route. Can I just use tap water (which has chlroine in it) and switch water out maybe every 2-3 days? What are your suggestions regarding the water solution at the beginning? Once I do see roots then I can add in clonex solution or rapid start and give them some food but is it necessary to add nutes from the start? What is the best PH range?
3. Is there anything I should feed the mother plant more of before taking clones? Some say to use more bloom nutrients with Phosphorus, I need more info on this.
For the cuttings (5-8 inches) I am going to use clonex gel, cut the leaves 1/3, and stick em inside the cloner as soon as possible while its running.
What timer do you run in the aeroponics? 5min on 5 min off? 15 min on 15 min off?
Please let me know how to make this happen, I really need clones to root as I dont want to fail, I put in massive investment trying to root them close to 80-100% I dont mind even 50% success at this point. Thank you all and I appreciate any advice!
*The pictures show branches of few possible clones, they are only 3-6 inches long, I am going to wait until they are 5-8 inches long which is probably in the next week or 2*
*its branching out cus I fimmed it at the top*
