How I average a pound per plant

[MeEasy]

I see you still suck at tiny plants. Just the time you could save on trimming if you could just grow smaller plants. It's not that hard


this pic is from the internet I had to look for a visual to add to the joke.... lol

 

[JohnEmad]

poor little solo cup plants. Even my cloned autos outdid them.

https://forum.growweedeasy.com/forum/growing-community/372385-auto-clones-test/page2

 

[BU2B]

I have some friends that are really good at the little plant thing, I'm still learning

 

[BU2B]

OFFICIAL Unofficial Announcement: I've decided to call the method shown here: "The BU2B (you couldn't get a) PPP Method" or BU2BPPP for short. The avatar name BU2B is from a song by RUSH "I was Brought Up 2 Believe, the universe had a plan..." and PPP is for PoundPerPlant. I'm open to suggestions really... but my hope is that people reap the rewards not so much that I get the credit. It's like patenting a natural plant process (like ... some have done). I don't think you can take credit for the plant doing what it does, though it is my pleasure to show you how to get your plant to do what it does all on its own.

A special thank you to all of you for tuning in, I've been wanting to do this for a while. Nice to know people are interested. Please, if you find any of the information useful, and the results are worth the effort put into them; SHARE THIS INFORMATION. I don't have all the answers to growing, but I do know this method as I've been using and refining it for a while. I am now to the point that not sharing what I learned would be worse than putting your method to scrutiny by others. To get the best use of this method, use it as a guide, not scripture.

A Reminder
"When you've lost your way
Colors start to fade
Take a look within
Find your offering
Hold it to the sun
Let your spirit run
Remember
Remember find your center"
T.Hall

 

[BU2B]

How to use this method with clones:

This will be the only section addressing how to apply this method to clones. As has been mentioned - they're slightly different in that nodes are offset, not even as in a plant started from seed.

To use this method on a clone, you will want to start with any healthy branch and the main branch. You want to pick a section that has a good side branch that has relatively the same number of nodes as your main branch. If you don't have any branching (note - we are looking for actual branches here not just leaves) then start near the top of your clone. Your main branch is going to be 1 branch and the node you have chosen near the top of your clone is going to be the second branch. Gently fold the plant over and restrain the main branch right at the node. You DO NOT have to 'top' your clone, you are making use of what is there naturally. Though new nodes on your clone will be offset, the same principle applies. Remove under-facing growth and follow the general guidelines of this grow method. As shown earlier, I don't think there's much doubt that the plant its self doesn't give a care if the nodes are not even. Below are images of the same plant shown in post #30 to give you just one idea on how to apply this method to your clone. I can't make your clones have even nodes - but as see you can see, in the end it's really not 'much' of a problem.



Hats off to you cloners - I've never been too good at making clones (I know, I know, like small plants - it's easy!) That's not to say I haven't been successful, just not consistent. :nah:

 

[oldjarhead100]

I grow pretty much the same way but I have a question Is their a point when more top bud sites decreases the size of the buds themselves, I'm going to try and address that issue in my next grow

 

[Dieselgrower]

following this

 

[Doubledealing72]

Aweome tutorial so far! Looking forward to seeing the rest!

 

[JohnEmad]

thanks for taking the time to post all this.

 

[SoOrbudgal]

Yes that is what my clones look like

 

[growell]

so u dont top at all when useing clones then mate and u do everything at ends i just done my clone i followed what u did for seeds there not as symetrical so we see the pic u put up they 2 days inflower good info mate

 

[SoOrbudgal]

This is a clone i sorta manifolded i think? Some get really stiff and woody to bend.

 

[BU2B]

Remember the Windows tubes screensaver? Some of my early plant structures would put it to shame. In my book, any grow is a good grow.
"Homegrown is a good thing, Homegrown is the way it should be, Homegrown is a good thing, Plant that bell and let it ring!"

 

[BU2B]

No Political Ads here folks, but 4 States are voting on Adult Recreational cannabis legalization today. If you reside in one of those states - I bet you know who you are - PLEASE VOTE FOR RESPONSIBLE ADULT USE OF CANNABIS!

New Jersey 👍🏼🎉
Arizona 👍🏼🎉
South Dakota - Medical & Adult Recreational👍🏼🎉
Montana 👍🏼🎉
And for Medical only we welcome Mississippi 👍🏼🎉

The following states now allow Adult Recreational Cannabis Use:

• Alaska.
• Arizona.
• California.
• Colorado.
• Illinois.
• District of Colombia.
• Maine.
• Massachusetts.
• Michigan.
• Montana.
• Nevada.
• New Jersey.
• Oregon.
• South Dakota.
• Vermont.
• AND Washington. (thanks Gluteous ) One would think I would remember this as I was in Washington a few months ago...

Great job folks at this point more than 1/3rd of the population of the US now have access to Legal Cannabis. Every cannabis initiative on the ballot for 2020 except one passed!

 

[AccidentalGardener]

My 4 clones nearing completion look a lot like this. I like it.

 

[BU2B]

oldjarhead100 "SPOILER ALERT!" - THAT is the remainder of the tutorial! ROTFL! Thanks for letting the cat out of the bag. 🤣

 

[MeEasy]

VOTE yes!! for the cannabis law just don't get bit by the snake hiding behind the cannabis, law

 

[SoOrbudgal]

Good luck to all states

 

[Ckbrew]

Manifolding can be done with clones. These 4 plants are clones from flowering plants. The first 3 made it back to veg, were manifolded, then sent back to flower.
The fourth refused to veg, so just for fun sent it back to flower. My entry for the smallest plant also.

Following this post closely. Thank you BU2B .

 

[grouchyoldman]

I feel blessed to live in a state where both Recreational use and personal growing were recently legalized. After more decades than I care to remember of living on the edge of legality for my love of this sacred herb I am finally freed!

Get out and Vote to Set Cannabis Free.

-Grouchy