What's new
By:
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

Grow Journal For Silver Haze & Higg's Boson Haze

No Title

Day-6 Yellow System
Water Changed- Day- 6
pH- 6.00
T-5 (HO) SunBlaster Nano-Tech (6400 K)
Humidity Dome- In Place
Medium- Rapid Rooters
Cloning Gel/Powder- Root Tec (Gel)
CX Clone Start Added to the water

Foliar Spraying- Magic Green, CX Clone Start, Yucca Root, & Kelp

The two sets of leaves are officially dying off, 100% believed to be issues with the temp swings and high heat lately, I really thought they did stand a chance there for awhile, but in the end it was a combination of letting the Rapid Rooter get too dry and the heat/humidity is why I think they didn't survive, as unlike the cutting, they didn't have the extra water and nutrient stores to sustain them during the critical periods when issues hit.

The Silver Haze cutting is doing so well I am actually wanting to transfer it to the Blue System, with the exception I am making some changes to the Blue System before the water change and even as of today, so now transfers yet until I get this mess all sorted out... (More Infomation Below)

-------------------------------------

Day-31 Blue System
Water Changed- Day- 6
System Water Level- Full
pH- 5.90
PPM's- 153
Water Temp- 78.8
Air Temp - 76.5
RH- 51.5
CO2- Off
Air Recirculation/Exchange- On 24-7
Veg LED (P-300, Platinum LED) = *VEG & BLOOM ON*

* As of today, both the VEG & BLOOM Switches are now on for the Blue System
** Also added the 6-Point LED (WARM) with the Utility Clamp Light

% Got the parts to start connecting up to the Hyper Fan from the Blue System and have a way to even finally regulate the airflow from each system across the Ice Box Cooler, one more step closer to trying to have better temperature control. Hoping to get the needed upgrades done between now and the water change to bring more of the aspects of both the Red & Blue Systems online, and be one more step closer to finally getting these finally up to the specs they were designed to run at in their fullest capacity.

In turning on the VEG & BLOOM Switches at Mid-Day there is substantial increase of plant growth and a drop of 0.10 pH since the change and adding the extra WARM LED light bulb to better help fill in the light spectrum of the missing Yellows, Oranges, and Red's so claimed one article I read. All I know is that in reading the following article I know 99% of this in practice from personal experience, so who am I to argue the science they are claiming behind it.

https://thegreensunshineco.com/7-myths-led-grow-light-companies-tell-you/

I did have to provide my email address to read the article, but that was all and I haven't been spammed by the company still and it has been hours now...
 

Attachments

  • photo22000.jpg
    photo22000.jpg
    1.6 MB · Views: 0
The reasoning behind only one photo is simply because there is no way to tell where the one plant begins and ends, despite trying to use my hand to separate them as they are both trying to grow into each other. The Higgs Boson Haze will be Topped shortly, and after these upgrades I'll be moving the Silver Haze and then it will become more clear as to how big each plant will have gotten soon enough with this next water change.
 
Which is why I love teaching!! Which is what you encourage people to do in your signature: back to the basics of reading. I try to keep my focus on the students who do follow through on what I teach them, while it seems that most millenials have simply given up reading anything that's not on a cell phone screen. Very sad.
I teach in the classroom, and you teach life skills. I actually try to teach life skills to my students--which is much more important for them than Spanish. And when they come back and show me that they have improved their abilities, their outlook--whatever it was we were working on--I always remind them to pay it forward and be ready to assist others who need to learn the same skills. I work with a lot of students who come from the underclasses of the dirty south, victims of the traumas of racism and economic marginalization for generations. I love them so much.

What your grandma did is amazing: what a gift to her family!! My family was the opposite--too much mental illness and depression. I know so little of the grandparents who came from a shtetl outside of Minsk, I believe. They settled in Niagara Falls and ran a small grocery store. When I read Bernard Malamud's The Assistant, that's exactly how I imagined my gradparents' store.

So you are blessed with the old wisdom!! And use value (rather than exchange value). Right on, GT!!!
 
GT, I read the article about LEDs; I didn't understand the technicalities very well, but one statement struck me: Was the article arguing that one doesn't have to switch between MH and HID, but rather should use a wide spectrum bulb all the way through the grow? I'm using MH and HID in my large grow box.
 
He was more trying to get the point across I think that the reasoning we switch between MH and HPS is commonly portrayed as "you ONLY need these color bands during this point of the plant's life", which he was then trying to get the point across that is 100% not true at all. Plants need a broad spectrum of lighting at all times, yes sometimes the plant will fair better with more of one color band or another, but the plant still needs a wide range of colors.

A friend and I discussed MH-HPS versus a very powerful LED, cost to run, heat it would generate and even the yields... To try to make everything as fair as possible he set up the MH-HPS and the LED in the same room so they would get the same everything, but be under two different lighting systems for the entire grow. Among all the things he would report back as findings, when the HPS and the LED overlapped in the center of the room he had the best yields and the best potency. I questioned it of course, because it didn't seem like it should make a difference, however I did change my mind to agree with him after having it proved to me. I've already got my lights, I don't need or want anymore... so I have no reasoning to continue to researching lighting as much as I do other than the fact I want answers as to why HPS and LED combined makes the best buds.

As a part of that article when they are explaining the plants needs for specific color bands it brings out LED lights can't make some certain colors, and that is why when the HPS is combined with it suddenly the plant gets all of the color bands it needs. Hence why LED companies aren't the same, explains why LED grow lights are purple, and why even under MH-HPS lighting you won't get the same results as HPS & LED together. Because until you get all the different color bands to match as closely to the sun as growing outside, nothing you grow will ever be as good as the sun itself. We are making improvements all the time with lighting, but we are honestly still a long ways from mimicking the sunlight itself for a plant.
 
Wow, thanks so much GT! I understand that perfectly!! It makes such sense. Systems just like what your friend experimented are right around the corner...
 
Day-7 Yellow System
Water Changed- Day- 7
pH- 6.00
T-5 (HO) SunBlaster Nano-Tech (6400 K)
Humidity Dome- In Place
Medium- Rapid Rooters
Cloning Gel/Powder- Root Tec (Gel)
CX Clone Start Added to the water

Foliar Spraying- Magic Green, CX Clone Start, Yucca Root, & Kelp

-----------------------------------------

Day-32 Blue System
Water Changed- Day- 7
System Water Level- Full
pH- 5.90
PPM's- 158
Water Temp- 79.8
Air Temp - 83.0
RH- 63.5
CO2- Off
Air Recirculation/Exchange- On 24-7
Veg LED (P-300, Platinum LED) = *VEG & BLOOM ON*

* Reversed temp vent fan up top to blow heat out, instead of continuing to blow cooler air into the system
** Found the filter bypass was leaking at the connections, caught the problem because of the drip cloth and catch glittered from the water, I WOULD NOT HAVE IF THE LOWER LIGHTING WAS OFF!!!

% Making this post early as several severe storms are heading right at us, and the Storm Chasers from the TV are close and told people "this is the worst they have ever seen on radar before!". We are now getting power glitches so this posting is being made early and will be updated when time provides later.

Power was on and off all night... thankfully everything inside and out faired just fine, although plenty of people including us all admit having ran for cover when the winds went from 0-85+ mph suddenly and the rain came in sheets.
 
Last edited:
Yellow System
Water Changed- Day- 8
pH- 6.00
T-5 (HO) SunBlaster Nano-Tech (6400 K)
Humidity Dome- In Place
Medium- Rapid Rooters
Cloning Gel/Powder- Root Tec (Gel)
CX Clone Start Added to the water

Foliar Spraying- Magic Green, CX Clone Start, Yucca Root, & Kelp

Day-8 Silver Haze Cuttings (One cutting, Two leaves rooting together in one Rapid Rooter)
Previously I truly and completely though the one leave cutting was dead as all can be, I even tried to give it a gentle tug out, but it didn't move and so I didn't dare force it... and thus left it figuring I would pull it out when it dried up the stem and it would pull out with ease. Today when I did the rounds, to my sheer amazement the leaves on both were perky and raised up for the light... so I was wrong, they both are still living, guessing now it must has been a life or death situation and the leave pushed roots out in the final hours.

Day-1 Higgs Boson Haze (One Cutting, Six Leaves all in there own Rapid Rooters)
Since only having one seed which did anything, and of that seedling I got one plant, this is my best attempt to push to have a lot more of this strain,

-----------------------------------------

Day-33 Blue System
Water Changed- Day- 8
System Water Level- Full
pH- 5.90
PPM's- 160
Water Temp- 78.8
Air Temp - 78.0
RH- 54.5
CO2- Off
Air Recirculation/Exchange- On 24-7
Veg LED (P-300, Platinum LED) = *VEG & BLOOM ON* + 6-Point LED WARM Bulb

+ Took the cuttings from the Higgs Boson Haze tonight since the plants are simply just growing out of control, I did take a photo before Topping Higgs Boson Haze and saving all the parts of the plant I could and making the attempt to root everything possible.

I need to keep doing some much needed upgrades to get the Red System backup and online. So far I have the new air pump to feed all the plant tubs, the 12-outlet manifold and the 12 anti-siphon valves to protect the pump from water coming back from the air stones, as well as the 50-foot of black silicone air line tubing. All of the ordered parts should all be here next week, which leaves me about 1-week to work on getting the rest of the modifications made, Tomorrow I'm hoping to get the 6-inch ductwork modified to connect up the Red & Blue Systems ventilation together for cooling purposes, and I'm still working on finishing the Ice Box design, as I still firmly believe plastic encasement is the best way to go but I am hung on the best ways to join the plastic seams by either epoxy/glue or by heating and bending the plastic myself, or perhaps even welding it together. At this point I am going to get the ventilation combination connected and get it all figured out as it looks in its final design, then I hope to have the last answers I will need on how best to build the Ice Box Cooler.
 
Yellow System
Water Changed- Day- 9
pH- 6.00
T-5 (HO) SunBlaster Nano-Tech (6400 K)
Humidity Dome- In Place
Medium- Rapid Rooters
Cloning Gel/Powder- Root Tec (Gel)
CX Clone Start Added to the water

The newest clones aren't looking so healthy, but when do they when they get cut and all chopped up to push new roots... I'll keep spraying and see what happens... but NO MORE Magic Green for them... (more information below)

-----------------------------------------

Day-34 Blue System
Water Changed- Day- 9
System Water Level- Full
pH- 6.00
PPM's- 164
Water Temp- 78.9
Air Temp - 81.5
RH- 55.5
CO2- Off
Air Recirculation/Exchange- On 24-7
Veg LED (P-300, Platinum LED) = *VEG & BLOOM ON* + 6-Point LED WARM Bulb

Silver Haze is now touching the LED light and Higgs Boson Haze is quickly taking off because of being Topped... I am going to give them both a couple of days before the move... hence why I'm putting off the water change as I try to get things ready to do it.

I learned some important information today by just looking up Magic Green on different websites to buy it, this one really did the most to help me:

-------------------

House & Garden Magic Green (2.7-0.7-3.5) is a foliar spray used to increase vitality and ensure that your plants get what they need for a successful flowering period. Use on rooted sprouts, cuttings and mother plants up to once a week during the growth phase. Foliage will turn to a vibrant, dark green color and a protective waxy layer will form on the leaves.

Magic Green will optimally nourish your plants from the outside in and strengthen your plants’ natural defenses, helping to green-up plants in all phases of growth. All ingredients and additives are made with pharmaceutical and/ or food grade ingredients in small batches to ensure a consistent quality and experience.

DIRECTIONS FOR USE:
Mix 5-10 ml per liter of spray solution. Apply 1-2 times per week just after the lights have been switched off.

Soil Nutrient A & B Feed Chart (PDF)
Cocos-Hydro-Aqua Flakes Feed Chart (PDF)

Ingredients: Ammonium nitrate, nitric acid, potassium oxide and phosphoric acid.

-------------------

I was going based off from different information of 1-2ml per 1-liter of water..

-------------------
Here is a list of the sites I was reading and learning from today to help me understand even more about PGR's:

http://www.ilovegrowingmarijuana.com/hormones/

Tips for improving the efficacy of ethephon PGR spray applications
"Air temperature at application and carrier water alkalinity can influence the efficacy of your ethephon plant growth regulator (PGR) applications."
http://www.greenhousegrower.com/pro...-on-improving-your-ethephon-pgr-applications/


Michigan State Experts Offer Tips on Improving Your Ethephon PGR Applications
http://www.greenhousegrower.com/pro...-on-improving-your-ethephon-pgr-applications/

PGR- Kinetin (a natural plant hormone):

Bonide Tomato and Blossom Set Spray

Speeds Harvest — Increases Yields! Bonide Tomato Blossom Set Spray contains the biological grow power of Kinetin (a natural plant hormone) to promote blossom set and fruit development in tomato and vegetable gardens. Almost every blossom will produce bigger, more beautiful fruit… ripening up to 3 weeks earlier! Ready-to-use, all natural spray is available in TWO convenient sizes. This product is NOT registered for sale in the state of California.

Features:
• Promotes flowering, improves yields & reduces time to harvest
• Blossoms will set fruit — even in poor weather!
• All natural spray produces faster, bigger tomatoes with fewer seeds
• Works on tomatoes, beans, cukes, peppers, strawberries and more.
• Contains an all-natural plant growth hormone (Kinetin)

DIRECTIONS FOR USE:
To promote blossom set and fruit development spray the flowers and adjacent foliage until the leaves are completely wet. Repeat as blossoms appear or every 1-2 weeks.

Product Label – PDF format
Material Safety Data Sheet (MSDS) – PDF format

*Which can't be sold in the State of California because they know it to cause health and reproductive harm
 
Yellow System
Water Changed- Day- 10
pH- 6.00
T-5 (HO) SunBlaster Nano-Tech (6400 K)
Humidity Dome- In Place
Medium- Rapid Rooters
Cloning Gel/Powder- Root Tec (Gel)
CX Clone Start Added to the water

Moved the new clones around, removed the two Silver Haze clones and put them into the Blue System

-----------------------------------------

Blue System (6/2, 3-times a day)

Day-1: Silver Haze Clones (x2)
Air Recirculation/Exchange- On 24-7
Veg LED (P-300, Platinum LED) = *VEG ON* + 6-Point LED WARM Bulb

I moved them from the Yellow System, and moved the Higgs Boson Haze and Silver Haze into the Red System

-----------------------------------------

Day-35 Red System (14/10 light schedule)
Water Changed- Day- 1
System Water Level- Full
pH- 6.20
PPM's- 100
Water Temp- 73.8
Air Temp - 88.5
RH- 46.0
CO2- Off
Air Recirculation/Exchange- On 24-7
Veg LED (P-450, Platinum LED) = *VEG & BLOOM ON*

% Having a very stressful couple of days, can't think very well... will try to sort out things later and add nutes later... to many mistakes being made because I am not up to par and able to function very well do to stress.
 
Take it easy, GT: don't stress over stress! I'm sure you know: the zen of stress is to surrender to it; then you can let it go instead of squaring it.
 
Yeah believe me I am so well aware, since my brain injury any time someone or something is able to stress me out, I go from being very capable of doing everyday tasks like getting myself dressed now, to not being able to dress myself or do other basic things I was able to before that stress. The Dr says this is normal and common for someone with a head injury like mine, and so I've made it perfectly clear to those who call themselves my friends around me, not to stress me because it seriously affects me for long periods of time. I've had to cut out anything out of my life that even gets me excited, because like stress it just overwhelms my brain and shuts me down horribly. Thus someone in my life got to see first hand how one simple stressful situation affected me one time... and they latched on to it and knowing more about me than I do right now found my weakness and keep trying to bang on it like a drum, thus I warned them and tossed them out of my life because I seriously just can't take it. Which has only led to them trying even harder to come at me with new accounts everywhere they can find me online, etc...

Thus I can sadly say this stress is nothing I can really control, it is why the water change was late again, and why it took me most of the night to do a simple 30-60 minute task, and I still didn't get it completed yet. I did however create quite a few messes, like overfilling the tanks while watching them fill, because I never realized the water was near the top or that it was then overflowing for however long, it was quite a mess so it was more than a brief or quick overfill. I sat two feet from the stove waiting for eggs to boil, water ran dry eggs begin to smoke, smoke alarm went off... and still I was sitting there waiting for the eggs to boil, until I had another come out and clue me in as to what was going on... The information was there, but my brain just doesn't put it together yet when I am under any kind of stress... talk about needing a stress free lifestyle.

I can't even mix the nutes yet because it requires basic math skills and I don't have access to them still yet... hoping my brain settles down soon so I can mix this next batch of nutes, I still have to finish what I started last night too, but first I need to be able to sort it all out in my head as to what I need to do step by step... and thankfully I have almost everything written down as to what to do, should I have ever needed to ask someone else to do all this for me, but there again my reading is limited and my skills of comprehension aren't there... so it might as well be in another alien language for a food item of theirs... because it makes as much sense to me right now.

Thankfully I do recall how to clear negative energy out of a room and am taking steps to try to balance things now...
 
Yellow System

# Day-2 (Higgs Boson Haze Cuttings)

Water Changed- Day- 1
pH- 6.00
T-5 (HO) SunBlaster Nano-Tech (6400 K)
Humidity Dome- In Place
Medium- Rapid Rooters
Cloning Gel/Powder- Root Tec (Gel)
CX Clone Start Added to the water

The cuttings all look sick, but are making it... all that can be expected from fresh non-rooted cuttings at this point I keep spraying with Yucca Root and Clone Start

-----------------------------------------

Blue System (6/2, 3-times a day)

# Day-1: Silver Haze Clones (x2) (Repeating Day-1 Until they can establish them under LED lighting)

Air Recirculation/Exchange- On 24-7
(P-300, Platinum LED) OFF = 6-Point LED WARM Bulb

Had to shut off the P-300 and just run the WARM LED, the two leaves couldn't take the intense light or heat stress, they are just too fragile at this point, it was a choice of either get one good cutting out of it or wait and fight to get the leaves accustomed to their environment and then try the LED again in a few days.

-----------------------------------------

Red System (6/2 light schedule 3-times a day)

# Day-35 Higgs Boson Haze (Seedling) & Silver Haze (Clone)
Water Changed- Day- 1 (2) No Nutes Added yet
System Water Level- Full
pH- 6.10
PPM's- 110
Water Temp- 76.4
Air Temp - 79.5
RH- 57.0
CO2- Off
Air Recirculation/Exchange- On 24-7
Veg LED (#1 P-450, Platinum LED) = *VEG ON*

I had to change the light cycle to 6/3 again and shut off the BLOOM switches as well as #2 P-450, temps rocketed to 91 and despite trying to cool things, I couldn't get the temps down. Looking inside I noted the leaves curled themselves closed from the intense lighting and what didn't curl at the top was drooping trying to protect the inner stem and plant... Clearly it was just to much light and they weren't ready for the intensity of the transition. I have been spraying with Yucca Root and trying to help the plants recover from heat stress and they are after several hours now beginning to lift their leaves back up to the light.

*************************************

I have decided to just give both Blue & Red Systems just Kelp & Yucca Root for now... no nutes at this point, not until tomorrow... I want them to recover form the transitions and the heat stresses and then after they are more adjusted I will give them nutes, there is no sense in stressing them more than I need to at this point. I have made enough mistakes in the past 24-hours with them as it has been I am concerned about doing anything more until I can get my head back in order, but I know the Kelp & Yucca Root are both safe options.
 
Wow, GT, it's so interesting how a brain injury affects one. Just try to be patient with yourself; do you have anyone there who can measure nutes and help you with things like that? I suppose that if you did, they would already be there. Stupid question.

PATIENCE. Word of the day, the month, the year. And yes: staying away from those who thrive on negative excitement...
 
# Day-3 (Higgs Boson Haze Cuttings)

Water Changed- Day- 2
pH- 6.00
T-5 (HO) SunBlaster Nano-Tech (6400 K)
Humidity Dome- In Place
Medium- Rapid Rooters
Cloning Gel/Powder- Root Tec (Gel)

New foliar spray CX Clone Start, Kelp & Yucca Root

The cuttings all look sick, questionable if they will make it, trying to get things better, the Rapid Rooter appear to be too wet, trying to dry them out but not the plants.

-----------------------------------------

Blue System (6/2, 3-times a day)

# Day-2: Silver Haze Clones (x2) (Repeating Day-1 Until they can establish them under LED lighting)

Air Recirculation/Exchange- On 24-7
(P-300, Platinum LED) OFF = 6-Point LED WARM Bulb

Sprayed with the new foliar spray for the Yellow System, hoping to push for more roots because I want to get the LED turned back on. I did discover the timer was mis-set to 24-7 ON, which might have had something to do with them not being able to tolerate the intense heat and light, in any case... I will still try to push out more roots and then turn the LED back on.

-----------------------------------------

Red System (6/2 light schedule 3-times a day)

# Day-36 Higgs Boson Haze (Seedling) & Silver Haze (Clone)
Water Changed- Day- 3
System Water Level- Full
pH- 6.10 (Was 6.20 until I poured in the Sledgehammer then it dropped to 6.10 after being steady for 24-hours)
PPM's- 50's (Since dumping in Sledge Hammer the PPM's dropped and won't come back up)
Water Temp- 75.9
Air Temp - 79.5
RH- 60.0
CO2- Off
Air Recirculation/Exchange- On 24-7
Veg LED (#1 P-450, Platinum LED) = *VEG ON*

Tried turning on the (#2) P-450 again and the Silver Haze had issues again, only suddenly it appears to be a nute issue... and while I stepped back to think and consider this more and return. Next I found a chunk of leave missing, and I mean completely missing half of a full leaf, not having any notes of it being hung up or torn I did a much closer inspection. There appears to be indentations in the leaf surface, either cause by a bug or mold, but I didn't see any color changes under the LED lighting for the mold... so I am guessing it is a pest of some sort. No matter I sprayed Ed Rosenthal's - Zero Tolerance at lights out and returned at the time the lights came back on, and the leaves were all very perky and upbeat suddenly. What I had been summing up to transplant shock, now suddenly appears to be fixed in one treatment of Zero Tolerance, Well whether it's a pest or something else, that stuff will wipe it out if I just keep spraying every 3-days for the next nine days for the 3-treatments... and problem should be resolved. Because I am unclear on if I have a nute issue or a leaf burning issue from the intense LED's since I never saw these nute issues in the leaves prior to the move, I am doing a flush now with Fox Farm's- Sledge Hammer... and will get things back on track here so I can get these plants put into flower soon.
 
# Day-3 (Higgs Boson Haze Cuttings)

Water Changed- Day- 3
pH- 6.00
T-5 (HO) SunBlaster Nano-Tech (6400 K)
Humidity Dome- In Place
Medium- Rapid Rooters
Cloning Gel/Powder- Root Tec (Gel)

New foliar spray CX Clone Start, Kelp & Yucca Root

One or two may not make it, not looking good... still spraying and hoping out hope

-----------------------------------------

Blue System (6/2, 3-times a day)

# Day-4: Silver Haze Clones (x2) (Repeating Day-1 Until they can establish them under LED lighting)

Air Recirculation/Exchange- On 24-7
(P-300, Platinum LED) VEG ON = 6-Point LED WARM Bulb

Turned on the VEG switch today and as a result the plants are now showing signs of needing nutes, burnt edges I could have thought was from the heat and light, but the yellowing going back from the edges has me believing its time for nutes..

UC Roots 60-ml
Cal-Mag- 30ml
Veg A- 7.5 ml
Veg B- 7.5 ml

-----------------------------------------

Red System (6/2 light schedule 3-times a day)

# Day-37 Higgs Boson Haze (Seedling) & Silver Haze (Clone)
Water Changed- Day- 4
System Water Level- Full
pH- 6.10 (Was 6.20 until I poured in the Sledgehammer then it dropped to 6.10 after being steady for 24-hours)
PPM's- 50's (Since dumping in Sledge Hammer the PPM's dropped and won't come back up)
Water Temp- 75.9
Air Temp - 79.5
RH- 60.0
CO2- Off
Air Recirculation/Exchange- On 24-7
Veg LED (#1 P-450, Platinum LED) = *VEG ON*

UC Roots 60-ml
Cal-Mag- 30ml
Veg A- 40 ml
Veg B- 40 ml

* The drip of a leak has started at the Red Heater... Needs to repair at system maintenance.

Removed leafs which appeared to be continuing to get worse be it mold or pests, soaked leafs in water saw what appears to be floaters on the water, leading to the questionable conclusion that the aphids are trying to strike again... in any case, I have removed the leaves and will act accordingly to the belief it is aphids WITHOUT ANY FURTHER PROOF... If it is something else or not remains to be seen, but at the risk of a pest, will address as a pest.
 
# Day-4 (Higgs Boson Haze Cuttings)

Water Changed- Day- 4
pH- 6.00
T-5 (HO) SunBlaster Nano-Tech (6400 K)
Humidity Dome- In Place
Medium- Rapid Rooters
Cloning Gel/Powder- Root Tec (Gel)

Foliar spray CX Clone Start, Kelp & Yucca Root

-----------------------------------------

Blue System (6/2, 3-times a day)

# Day-5: Silver Haze Clones (x2) (Repeating Day-1 Until they can establish them under LED lighting)

Air Recirculation/Exchange- On 24-7
(P-300, Platinum LED) VEG ON = 6-Point LED WARM Bulb

Noticed the smaller of the two the "twin" has new leaves starting to form, finally. I also noted on the cutting (single) the leaf tips are turning crispy, just thinking it is heat/lack of humidity or something else...

-----------------------------------------

Red System (6/2 light schedule 3-times a day)

# Day-38 Higgs Boson Haze (Seedling) & Silver Haze (Clone)
Water Changed- Day- 5
System Water Level- Full
pH- 6.30
PPM's- 47 (PPM's have been all over the place like when I need to change the water)
Water Temp- 77.4
Air Temp - 80.0
RH- 50.0
CO2- Off
Air Recirculation/Exchange- On 24-7
Veg LED (#1 P-450, Platinum LED) = *VEG ON*

The parts I was waiting on came in today, had some defects... now having to wait on replacements... no oxygen to the water tanks until I get this sorted out quickly! Having more issues looking like nute issues with the leaves, but I am equally seeing a depression between the veins like someone is sucking the life out of the leaves... I should know this, but I don't and haven't found the books to tell me yet.
 
You must log in or register to reply here.
Back
Top