What's new
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

First auto grow. LED veg vs bloom?

Kevingm1987

New member
Hello everyone,


First post in the site! Love all the info and input from people reading through everything. Currently growing two autos my first plants ever. As legalization becomes closer and closer to reality in Canada I thought I would give growing a shot so I would have a supply ready instead of buying it from the government.

My wife suffers from neck pain so I decided to so with CBD heavy strains for the first grow. I placed my first order went Seedsman and received appx 30 seeds after getting all the freebies and using bitcoin.

Currently in the tent I have one fast eddy from RQS and one CBD white widow from Dinafeb. Just started the germination process two other seeds as well. One biodiesel from advanced seeds and CBD crack from fast buds.

Current set up:
2x4x5 tent
2-600W full spectrum LED. One Morsen and one Maxbrhydro
4”in-line fan with carbon filter
GH flora series
fabric pots
organic soil with added perlite

my questions are:
do people grow with both veg and bloom always on or do you let plants veg under veg for a certain amount of time before clicking both on?

Once i I click both on do I have do worry about anything? Light Further from plants? Change amount of light? Light is currently 18/6

Also, if I was to grow a photo plant at the same time and dropped the light to 12/12 for flowering, could I still grow autos? I guess my question is would turning the lights down to 12/12 effect my autos?

Thanks

PS what’s wrong with my tomatoes? Leafs are turning yellow
 

Attachments

  • photo43387.jpg
    photo43387.jpg
    3.6 MB · Views: 2
  • photo43388.jpg
    photo43388.jpg
    3.2 MB · Views: 3
  • photo43389.jpg
    photo43389.jpg
    3.5 MB · Views: 0
I usually use only my veg switch on for the first 4-6 weeks, then switch to both on. Sounds like you have plenty of light ( plenty). Follow manufactures recommendation on height till you get em figured out. 12/12 light schedule would just result in a lower harvest amount than a higher light period but shouldn't hurt the plant otherwise.
Your plant may be to close to light, yellowing on top, could be overwatering, 2nd picture top part of leaf looks rotted. But no way to tell for sure with a few pics and limited information.
 
Last edited:
You can use both veg and bloom throughout the whole grow with no problems, however in early stages of growth when the canopy is not completely filled. It would be better to use just the vegging lights or dimming features so you can bring the lights closer without damaging levels of light intensity. That way light is not wasted from reflection losses.
 
That middle one is the stupid tomato plant that i can’t keep alive for some reason. I will see if I can take some better photos of my two plants. Don’t rewlly have a green thumb so everything is trial and error. Just transplanted to bigger pots and hoping to get a watering schedule down.
 
First grow like I said so I thought I would try with veg only for the first 4-6 weeks. Unfortunately my lights don’t have a dimming feature. Just veg and bloom switches.
 
Using just veg is fine for early growth, when the canopy starts to fill you can then start thinking about adding bloom with it. How many plants do you have ?
 
Wait until you see the preflowers then turn on your bloom light and leave everything turned on. And turn your lights on longer - like 20/4 some guys even run them 24/7. So if you go like that then you can rule out any photos. Grow em in your backyard - start em in your tent then move outside in June - summer solstice will flip em.
Good luck growing.
​​​​​
 
Currently in the tent there is 2 cannabis and 4 tomato. I just put two more seeds in jiffy pelts and once they pop I will make room for them. Remove at least one tomato most likely. Always planned to transplant tomatoes outside but might of planted them a little early for that.
 
You dont want to be wasting more light than you need, start with just one light on veg and when the canopy starts to fill then think about adding more light.

Have fun :)
 
Thanks for the info. Thinking I will bump it up to 20/4 shortly. There about 3 weeks old on this photo expected a little more growth but letting the plants do their thing. Unfortunately where I live I wouldn’t have the option of ever moving things outside. Maybe sometime in my life time...
 
I did this because I read that maximum coverage during flowering is 2x2 so now I have 2 - 2x2 areas covered. Would it be better to run only bloom on both lights once I switch over? Don’t want to burn the plants. Each mode on each light is only 300w. If I have both on that’s when it gets to 600w from what I understand
 
No, you want the full spectrum during flower. Just be cautious of the height of the lights and dont go closer than the manufacturer recommends and maybe even a little further back till you see how they do.
You have them on bloom switch now correct?
 
Currently lights are about 20” above plants. Right now I only have veg on. Plants are currently about 3 weeks old I think. Can’t remember the exact date I planted them. This is my first grow ever and didn’t keep a journal. I’m pretty sure I planted around March 1st. I just put two other seeds into jiffy pellets as well on Friday and will move them to the tent once they sprout. Still debating which to switch over to both veg and bloom on
 
20 inches should be ok with just veg switch on but I run mine a little higher at that age like 24 inches even with just veg. Are the leaves reaching up for the light or curling down or away?
 
Just added up to the minute photos in the post. Fast eddy leaves don’t look like they are curling either way and the white widow has the slightest up curl, barely noticeable.
 
There young, they dont always do that at that age unless there really pissed off (curling down) or really happy ( pointing up ) LOL. They look a little pale but I wouldnt worry about it yet. Might be bright light your shining on em.
 
I think it’s the flash of the camera. When I checked everything looked a healthy green. I pulled the light up just a tad, appx 22” from the top of plant at the moment. Being my first grow ever I didn’t plan on doing any LST training but may have to now. Don’t know what the final height of the plants will be but a little concerned my lights may get to close. Even if i bent it over once or twice it may do better than growing straight up. Just want the first grow to be a success! Currently still on 1/4 strength nutros but may bump that up to 1/2 for next feed
 
Back
Top