Fan placement

[TreeFiddy]

Hello All! So I have a 4x4x6.5 foot grow tent. I am going to get 4x clip fans (non oscillating). I am not sure where the best place to put them. Here is a little drawing of my grow tent. If you could shoot me your thoughts on this, I would greatly appreciate it!

 

[D.A.A.S.69]

I sure wish I had a big ole tent like yours, that must be nice.
You just want good air movement on your plants, I use a tower fan in my tent, plus a couple of those fans your talking about.
One in each corner, should be fine, have you got an intake an exaust fan ?
welcome to GWE.

 

[TreeFiddy]

Thank you! Yeah, it just became legal here medically, so i decided to get a decent set up. I have an inline fan with 442 CFM as well as carbon filter. I have a big fan in there now, but it keeps pounding my plants too hard even on the lowest setting, so i bought a bundle of 4 monkey clip on fans non oscillating. I want good airflow and possible a little temperature droppage too if they were turned up to a higher setting without hurting the plants. I have a 1000w MH light with the air duct cooling the light and exhausting out of the window. The light is dimmable, so i have had it on about 600 watts the first 2 weeks and just now turned it to 750 for the middle of week 2. The temp for 75 stays about 73-78 (depending on the time of day. I tried to put it to 1000w, but the temps were getting to about 85 (give or take), so for now im gonna leave it at 750 until i can figure out what to do about that. Im rambling now, but back tot he question, i really just want something that would be the best for air flow, to help get eferyhting flowing the best, Know what i mean? basically.... for having 4 flip fans, what is the best way to set them up

 

[Toker1]

I have the same set up. I used to use the clip fans, clipped to each pole. I eventually had to switch them out for 2 osolating desk fans. I now use those on top of narrow boxes and the girls love it. Found those clip fans would die out and need replacing all the time. Seemed to be a worse rate of failure in higher humidity.

 

[D.A.A.S.69]

I sure like your setup, and it sounds like you know what your doing, so good luck,
Yeah you just want good air movement, you got everything else.
HappyGrowing