What's new
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

DWC leaves turn yellow flower stage

Brownsugar

New member
Hi all. I started with my first grow (ever), in deep water culture. I am fairly new to all this and already have read a lot but I just cannot figure out what’s going wrong. I am growing in a 80x80 cm tent with KIND LED, 60 liters of water, 3 air stones, 2 small air pumps, 3 fans, 12 hours light/12 hours dark, its about 29 degrees (celcius) when lights are on. I am now in week 6 of the Bcuzz schedule (I also use all their products), see pic. Some info:

- i always try to keep ph between 5.2-5.5 as indicated on the Bcuzz schedule
- leaves already started to turn yellow in the first weeks of the schedule. At first I thought it was light burn so adjusted the light intensity to 80% instead of 100% (the height of the lamp is already at max, as the tent is not that high). Now back at 100% because it didnt do much to the leaves
- later on I figured out that there is also a thing called “ppm” which has to be about 800-1000, so i tried adjusting the nutrients to that, but somehow when i pick the lowest dosis in the Bcuzz schedule, its still has a ppm of 1400 or something (so for instance in week 6 I pick 2 ml of A and multiply that by 60 (liter)).
- we topped the plant a lot during the growing phase, as you can see in the overall picture. There were a lot of yellow leaves under the scrog net. My father told me to prune a lot (“lollipop”) but I am afraid I misunderstood the assignment and pruned too much leaves (i’ve read to also prune some big healthy leaves that were in the way of other buds etc). As the plant was so big, with lots of (yellow) leaves, i really couldnt see what was what anymore, so pruned everything on wednesday. This morning I clearly see new tips turning yellow, some leaves are already yellow.
- read a bit more about ppm this morning and now I’m thinking that my TDS meter might not be accurate as my tap water was already >800 ppm. Really frustrating.
- roots seem fine, very white, no rot.

Based on the pictures, do u guys may be have an idea of whats going on? Still nutrient burn? And I also saw that some hairs on the buds were turning yellowish, is this part of a normal grow process or should those hairs stay white? Ans how should i proceed tomorrow? To week 7 in schedule or just a week on ph’ed water without any nutrients?

thanks in advance,
a desperate wife who tries to grow some cannabis for her husband with autism
 

Attachments

  • photo150272.jpg
    photo150272.jpg
    2.5 MB · Views: 3
  • photo150274.jpg
    photo150274.jpg
    4.1 MB · Views: 3
  • photo150276.jpg
    photo150276.jpg
    3.6 MB · Views: 4
  • photo150277.jpg
    photo150277.jpg
    3.8 MB · Views: 3
  • photo150273.jpg
    photo150273.jpg
    3.6 MB · Views: 3
  • photo150275.jpg
    photo150275.jpg
    3.9 MB · Views: 4
  • photo150278.jpg
    photo150278.jpg
    1.9 MB · Views: 4
  • photo150279.jpg
    photo150279.jpg
    3.3 MB · Views: 4
  • photo150280.jpg
    photo150280.jpg
    3.2 MB · Views: 4
  • photo150281.jpg
    photo150281.jpg
    4.3 MB · Views: 4
  • photo150282.jpg
    photo150282.jpg
    3.6 MB · Views: 4
  • photo150283.jpg
    photo150283.jpg
    3.1 MB · Views: 3
  • photo150284.jpg
    photo150284.jpg
    2.1 MB · Views: 5
  • photo150285.jpg
    photo150285.jpg
    2.7 MB · Views: 3
Dang good first attempt at this method, my sister you do have some skills to attempt this at first time growing weed. Is that just one plant? I wish i could help more with water cultures but i'm a soil grower so all i know is what those on here do with Hydro grows. Way go with family helping also. Those that know this type of growing will come along to help. Good luck to you from a fellow woman grower :laugh:
 
Looks like BU2B has got you pretty much covered. What are you using to check the ph? Need to make sure that it is calibrated regularly. When checking ppm of nute solution, I subtract my straight water reading from the total to give nute ppm. Not familiar with your nutes but at least 1/2 what they say usually. Try to keep the temp of water as cool as possible, 65f is good. I run Orca cause I couldn't get hydrogaurd here, but that stuff will really help out. Every grow will become better and better.
 
First of all, thank u guys already for your motivating words. It really gives me hope as I got so frustrated because it takes so much time and energy and I was afraid that I killed my plant. I will reply to your comments individually now!
 
Thank u so much for the clear description. I will definitely give that a try. Just to be sure, I will switch to new hoses, and for the future will get darker ones.

So in regard to the 1/2 or 3/4 nutrients, do u still recommend me to measure the ppms of it? And what should the ppm per stage for dwc be?

Regarding you suggestions, after I run my system in that solution for 2-3 days, do I proceed to week 7 of the Bcuzz schedule (with 1/2 or 3/4th of the recommended amount). The flowers are still so small, i cannot imagine that I am already done in about 4 weeks..

Just one more thing, my brother was talking about calc/magnesium. I haven’t added that during the whole process because it wasn’t on the Bcuzz scheme. Do u recommend to also add some of that?

So in the end do u think it was a bacterial/root issue or indeed nute burn? Looking at it closley today, I now also see some yellow spots on the leaves, not just yellowing of the tips. I will keep u updated!!
 
Last edited:
Ah, thank u so much! Yes, this is one plant. My father has experience with soil and my brothers know a bit about DWC, so it was definitely with their help of course. But now we got stuck, so that’s why I reached out here!

Good luck to you as well, and I am looking forward to dive more into the whole cannabis topic/scene and learning more from this forum!
 
I will immediately recalibrate my PH meter. I have a combined one, it measures PH, EC, TDS, temperature, and some other things. What do u recommend the ppm to be in hydro?
 
Hi, you received great advice. I don't grow hydro but your post was very thorough, for one plant you have a lot of buds growing. Good luck, happy growing, hope it helps your hubby ~ another female grower.
 
Re ppm/tds unless your nutrient maker offers a hard water option or you are willing to invest in a R/O or other water filtration system there is practically very little you can do to lower tds other than cutting back on nutrients. My suggestion would be akin to what Smoklahoma suggested. Make note of you tds before nutrients (micro will add the most tds) but keep in mind that nutrients should be balanced in accordance with dosing directions of your nutrient manufacturer. Keep an eye on your tds and don’t allow it to get too high and if it does do a tub flush and reset of your nutrients. It will take a bit of practice to learn what works best for you and your plants.

Re week 7 yes - continue on as if you were normal but with lower nutrients. 😂

Re cal/mag. I would hold off on adding it. While you do want to give your plant what it needs there is no need to add what it doesn’t. Ph issues can manifest itself in a variety of ways including impeding nutrient uptake. I find that generally for hydro - plants that need additional cal/mag usually grow out of that stage early in veg mode. I like NebulaHaze ‘s comparison of nutrients to vitamins. Giving your children more won’t make them healthier and may actually do harm. Light & water are your plants essential foods. If after a week of running balanced ph and lower nutrients with all the damaged leaves removed - you see spotting on the leaf blades the issue can be re addressed.

The last 4 weeks is when your bud will fill in and ripen. The fun part is just about to begin.

And once again … damn nice job for a first grow. If you’re not proud yet, you should be.
 
Last edited:
Back
Top