What's new
By:
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.

Curing over dry buds

Artstone

Artstone

New member
I have buds in the jar, some over dry and I will put Boveda 58% humidity control packs​ in. Also going on vacation in 4 days will be away for 6 days.

2 questions , any suggestions on the dry buds? is the boveda packs enough?

and the not over dry ones any suggestions on what to do regarding opening the jars daily and skipping for the six days away?
 
For the overdried flower, spritz the underneath side of your jar lid and reseal tightly. That will def raise the humidity in the jar but not overly so. Brings mine up to 62, every time. Or just do what PRIMO suggests.

I don't use the Boveda packs anymore. Not since I ran across the spritz hack on this forum. I use it all the time during long term storage and when necessary.

On the others, I'm concerned about the RH level right now. How long have the buds not overdried been jarred up? If the RH is steady and you've been burping already it may not be a problem. If you have to be away sounds like your only option is to burp the jars when you return. The only issue is mold; my guess is the hay smell is already gone.
 
What % in the jars after 24hrs on the high moisture level ones?

You can't fix over dried buds but you can make them not so bad by lightly spraying the lids as Golf said. Ive done that in the past.
 
You can bring the RH up in the overdry jars by spritzing. If you're holding about 60 in the other jars continue to burp until you can't and then pick it back up when you return. It's not optimum but you should be OK.
 
58 to 63 is fine IMHO.

65 and up would be too high with risk of mold etc.. Just pour the jar out and leave for an hour or two before re jarring.
 
If your buds are too dry, tossing in a humidity pack or a fresh fan leaf can help bring some moisture back. Next time, try slowing down the drying process by keeping temps and humidity in check. Also, check out https://fastbuds.com/news/how-to-fatten-up-your-cannabis-buds-before-harvesting for tips on maximizing bud density before harvest—denser buds tend to hold moisture better, making curing easier and reducing the chance of ending up with overly dry nugs.
 
Last edited:
I just Smoke the nickle off top of the jar and then it seems fine. The next time i check its the same so i smoke another nickle off the top and its all good again. Fukin wurks
 
You must log in or register to reply here.
Back
Top