Announcement
Collapse
No announcement yet.
How to finish strong in flowering
Collapse
X
-
I tend to go a little conservative in veg but once I go to flower I tend to ramp things up a bit.
You want low RH and low temps so at that stage Id be at about 45%RH and 23 to 24⁰C
Hold these temps if you can and lower RH to 40% 2 weeks out from harvest then drop RH as low as you can go last two weeks without rising temps. Low RH will give you the frostiest and highest THC that strain can make. Low temps will keep your buds tight and dense. The highest possible quality.
you will need to give those a trim, remove all the leaves not in the light and make sure all your buds are getting full light.
Heaps of airflow. Measure air temps in the room but not under the lights
Suppliment your flower nutes with a PK suppliment. They do love kelp/seaweed extract in flower but not one with high N. I don't use kelp any more. It will give huge buds but the quality drops off re high THC and less frosty too.Flower Room: 11' x 7' x 7.5'H, 480w AC, 13gal/day dehumidifier, 1.5gal ultrasonic humidifier, 60gal (27gal usable) nute tank, 16" pedestal fan & 18" wall fan. Lighting and climate automated. Hand watering.
Veg Cupboards: Two 4x2x6H cupboards. SF2000 Evo in one SF7000 in other. Climate controlled and automated. Hand watering
Aeroponics Low Pressure Bucket: 20W LED. 5 clones & 20W LED 11 clones
Lights: Mars Hydro FC-E1200W, SF-7000, SF-2000 evo in flower room.
Medium: Coco/perlite, 7.2gal pots, no drains
Current Grow: 5 x Photos Franklin's Orange Zkittles x Sour Diesel in flower room, 3 Franklin's White Widow x Sour Diesel Clones, 13 x Orange ZkittleZ x Sour Diesel clones in Aeroponics buckets x 2.
Last Grow: A mix
- Likes 3
Comment
-
Originally posted by Bluey View PostI tend to go a little conservative in veg but once I go to flower I tend to ramp things up a bit.
You want low RH and low temps so at that stage Id be at about 45%RH and 23 to 24⁰C
Hold these temps if you can and lower RH to 40% 2 weeks out from harvest then drop RH as low as you can go last two weeks without rising temps. Low RH will give you the frostiest and highest THC that strain can make. Low temps will keep your buds tight and dense. The highest possible quality.
you will need to give those a trim, remove all the leaves not in the light and make sure all your buds are getting full light.
Heaps of airflow. Measure air temps in the room but not under the lights
Suppliment your flower nutes with a PK suppliment. They do love kelp/seaweed extract in flower but not one with high N. I don't use kelp any more. It will give huge buds but the quality drops off re high THC and less frosty too.
Bluey Thanks for the tips. Just curious, how do you keep the RH that low? I have a dehumidifier in the room but it needs to be emptied constantly, and still gets up to 65% in the tent at night. I think I need to add extra clip-fans, too.
For defoliation, how much should I defoliate at 6 weeks in flowering? Should I defoliate a lot, or just the biggest leaves? I realize now I should have defoliated earlier in flowering, but I can see the bottom of the tent isn't getting any light so I know air/light isn't getting through the plants.
For a PK supplement, I'm using General Hydro Flora nutrients, so I was looking at their "Liquid Koolbloom" 0-10-10 "bulking formula" (KoolBloom listing: https://www.amazon.com/General-Hydro...dp/B002DV8TBQ/)
I was also looking at their "Ripen" 0.5-7-6 formula since the strains are supported to be 8 weeks and are currently 6 weeks from 12/12. (GH Ripen: https://www.amazon.com/General-Hydro.../dp/B07JMHZTLD) Then again, I feel like it's going to need longer because the buds are still mostly white pistils.
Sorry to go so long! No need to answer or anything. Just putting all my thoughts out there.
Comment
-
Question:
Whats your intake -> exhaust situation ?
Clip fans that move the air around is great, but air renewal is important and for me at least is the most efficient way of managing RH. I don't really use humid or de-humidifier.
Comment
-
I have a big CanMax exhaust fan, and then the intake holes at the bottom of the fan are propped open to let fresh air in. It makes it pretty breezy in the tent (I can see the leaves moving) but I thought it might help to add a little extra airflow above the buds with clip fans? I think my biggest problem with humidity is I live in a humid part of the country, and the humidity outside and in the rest of the house is often 60% or higher.
-
-
Originally posted by MeowMeow View Post
Bluey Thanks for the tips. Just curious, how do you keep the RH that low? I have a dehumidifier in the room but it needs to be emptied constantly, and still gets up to 65% in the tent at night. I think I need to add extra clip-fans, too.
For defoliation, how much should I defoliate at 6 weeks in flowering? Should I defoliate a lot, or just the biggest leaves? I realize now I should have defoliated earlier in flowering, but I can see the bottom of the tent isn't getting any light so I know air/light isn't getting through the plants.
For a PK supplement, I'm using General Hydro Flora nutrients, so I was looking at their "Liquid Koolbloom" 0-10-10 "bulking formula" (KoolBloom listing: https://www.amazon.com/General-Hydro...dp/B002DV8TBQ/)
I was also looking at their "Ripen" 0.5-7-6 formula since the strains are supported to be 8 weeks and are currently 6 weeks from 12/12. (GH Ripen: https://www.amazon.com/General-Hydro.../dp/B07JMHZTLD) Then again, I feel like it's going to need longer because the buds are still mostly white pistils.
Sorry to go so long! No need to answer or anything. Just putting all my thoughts out there.
I use an industrial wall fan and a floor fan for full room air movement both are like 18" and both oscillate.
At this stage I'd only remove the leaves not getting direct light. It will help with lowering humidity and if they are not getting full light they are not doing much. Trim them over 4 or 5 days to reduce stress. Leave everything on getting good light.
I don't use anything but base bloom nutes and PK so can't comment on those other things, but stay away from plant growth regulators (PGR). Google it.
Flower Room: 11' x 7' x 7.5'H, 480w AC, 13gal/day dehumidifier, 1.5gal ultrasonic humidifier, 60gal (27gal usable) nute tank, 16" pedestal fan & 18" wall fan. Lighting and climate automated. Hand watering.
Veg Cupboards: Two 4x2x6H cupboards. SF2000 Evo in one SF7000 in other. Climate controlled and automated. Hand watering
Aeroponics Low Pressure Bucket: 20W LED. 5 clones & 20W LED 11 clones
Lights: Mars Hydro FC-E1200W, SF-7000, SF-2000 evo in flower room.
Medium: Coco/perlite, 7.2gal pots, no drains
Current Grow: 5 x Photos Franklin's Orange Zkittles x Sour Diesel in flower room, 3 Franklin's White Widow x Sour Diesel Clones, 13 x Orange ZkittleZ x Sour Diesel clones in Aeroponics buckets x 2.
Last Grow: A mix
- Likes 1
Comment
Comment