Hi everyone
I want to share my Lemon Skunk (GHS) grow with you and at the same time ask some questions
Abit about my setup,
First off, im using coco and canna with an semi-hydro setup. 26x Autopot with bottom feeding. For flowering im using a 240x240cm (96") tent where I have devided it in two half (120x240). The reason for that is because the are flowering on "shift", that way I have an equal power usage 24/7 and theres alot of small benefits with that, easyer to controll 1200w of heat than 2400w and the power company dosent get any wiser. The light switches exactly at the same time.. Night on one side and day on the other side.
All plants are topped, my "rule" is no more than 4 stems total, 2 colas and 2 lower stems, then I use LST (Low stretch tec) and basicly it becomes a game of tetris but in that way I get the most out of the space and light. And by doing it that way thers no need for cropping later.
They have 4x 600w with Adjust-a-wings, Lumatec ballasts and dual spectrum bulbs who are max 6mnd old (the bulb)
Alot of fans and ducting of course, no need for getting in to details other than I have a negative air pressure in the whole apartment witch is very important to controll the odor. All the air goes thru a sentrall air system and thers no need for coal filters.
Then there is a 90x150cm tent for clones, mother plants and drying, then another 90x90 tent as a relef tent while harvesting. I Never re-use a mother plant. Im prepearing 4 new mother plants out of 40 clones. 26 of the best looking plants goes to flower, 4 becomes motherplants for next round and those who are left goes in the trash.
Using X-stram Aero 40 for clones. No rot hormones, just a heating element and 28C does the trick (100% success, not a lie).
This is my 3rd round of LS in this setup, the yeld is quite nice. Last harvest I got 2874g of dryed and cured skunk. About 110g each tho the plants in the middle reach 130-140 and those in the corners get about 80g.
I got a pretty nice idea how to do this inside in an enviroment I can controll things but we are thinking about planting a few outdors. Not on the garden but away from peaking eyes and ratters. Ive found some nice spots far away from people...
Is there anyone here who has that kind of experience? Growing in the "wild"? I want to learn as mutch as possible to make sure those laydies get what they need.
Im pretty mutch drawing blank when it comes to it...
Ive added some pics from flowering, harvest and some pics of my new clones. I dont have the habbit to take alot of pics, im sorry but this is a few. I know the focus is really off on some of them :/
If you have some experience with outside growing like I explained, plz make a post or pm me.
If you have other questions about my setup ect dont hesetate to ask.
EDIT: forgot to mention that im in the northern hemisfere.
- TokerTom
I want to share my Lemon Skunk (GHS) grow with you and at the same time ask some questions
Abit about my setup,
First off, im using coco and canna with an semi-hydro setup. 26x Autopot with bottom feeding. For flowering im using a 240x240cm (96") tent where I have devided it in two half (120x240). The reason for that is because the are flowering on "shift", that way I have an equal power usage 24/7 and theres alot of small benefits with that, easyer to controll 1200w of heat than 2400w and the power company dosent get any wiser. The light switches exactly at the same time.. Night on one side and day on the other side.
All plants are topped, my "rule" is no more than 4 stems total, 2 colas and 2 lower stems, then I use LST (Low stretch tec) and basicly it becomes a game of tetris but in that way I get the most out of the space and light. And by doing it that way thers no need for cropping later.
They have 4x 600w with Adjust-a-wings, Lumatec ballasts and dual spectrum bulbs who are max 6mnd old (the bulb)
Alot of fans and ducting of course, no need for getting in to details other than I have a negative air pressure in the whole apartment witch is very important to controll the odor. All the air goes thru a sentrall air system and thers no need for coal filters.
Then there is a 90x150cm tent for clones, mother plants and drying, then another 90x90 tent as a relef tent while harvesting. I Never re-use a mother plant. Im prepearing 4 new mother plants out of 40 clones. 26 of the best looking plants goes to flower, 4 becomes motherplants for next round and those who are left goes in the trash.
Using X-stram Aero 40 for clones. No rot hormones, just a heating element and 28C does the trick (100% success, not a lie).
This is my 3rd round of LS in this setup, the yeld is quite nice. Last harvest I got 2874g of dryed and cured skunk. About 110g each tho the plants in the middle reach 130-140 and those in the corners get about 80g.
I got a pretty nice idea how to do this inside in an enviroment I can controll things but we are thinking about planting a few outdors. Not on the garden but away from peaking eyes and ratters. Ive found some nice spots far away from people...
Is there anyone here who has that kind of experience? Growing in the "wild"? I want to learn as mutch as possible to make sure those laydies get what they need.
Im pretty mutch drawing blank when it comes to it...
Ive added some pics from flowering, harvest and some pics of my new clones. I dont have the habbit to take alot of pics, im sorry but this is a few. I know the focus is really off on some of them :/
If you have some experience with outside growing like I explained, plz make a post or pm me.
If you have other questions about my setup ect dont hesetate to ask.
EDIT: forgot to mention that im in the northern hemisfere.
- TokerTom
Comment