HYDRO Connecting a 3/4" fitting to a 1" tube question

[RFheavy]

The fitting on my water chiller is 3/4" and I want to use 1" tubing to connect my buckets. Is there an adapter I can buy? They don't sell a 1" fitting for my chiller as it is an old model and they don't make parts for it anymore. Would 3/4" tubing on my buckets be a problem? I was always under the assumption that 1" was the way to go. I already have the parts for the 1" route so if I could stay on this course, that would be awesome. Any advice?

[SirSmksAlot]

You might be able to find a reducer at a hardware store or your hydro shop.

[RFheavy]

A reducer! Didn't know what I was looking for till now! Thank you, sir!

[SirSmksAlot]

You are welcome

[Toker1]

I assume you are talking about a 3/4 barbed male end on your chiller. If so you can cut a small strip of 3/4” tubing and attach it to the chiller and adapt up to the 1” line with a 3/4” to 1” barbed male end reducer (See link below).

https://www.dripdepot.com/item/barb-tubing-reducing-coupling-size-1-inch-by-three-quarter-inch?gclid=CjwKCAiAu9vwBRAEEiwAzvjq-0kukk1izGljKmLql4ayxHmJGWprjz3sQKIg0xqVBQdoAtYaOC4ihRoCF40QAvD_BwE

[RFheavy]

This was exactly it! Thanks!

[alltatup]

https://www.amazon.com/Spears-Fitting-Coupling-Schedule-Barbed/dp/B009F3N69K/ref=pd_sbs_328_t_1/146-8772792-8702424?_encoding=UTF8&pd_rd_i=B009F3N69K&pd_rd_r=3092ac06-ccb5-4516-9eb1-de709c9c00db&pd_rd_w=xB72g&pd_rd_wg=Faba5&pf_rd_p=5cfcfe89-300f-47d2-b1ad-a4e27203a02a&pf_rd_r=GJ0SW4H31E5H2Y17R4CN&psc=1&refRID=GJ0SW4H31E5H2Y17R4CN