Announcement

Collapse
No announcement yet.

Dwc top feed recirculating system

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Dwc top feed recirculating system

    Good afternoon I want to build a new system for my plants. i use just a standard bucket system with airstones easy I have extra buckets so changing out the water each week is not a hassle. But I want to scrog. So I think I have come up with a solution to my problem. I want to use 2 3.5 gal buckets propped up on a stand hight tbd. Then I am going to run a drain hose from the buckets with gate valves on each one and pipe them back to a 5 gal bucket. Then place a 100 gph pump into the 5 gal and run to a manifold with 3 out let's 2 for the top feed 1 for a drain to pump the system I each having a gate valve. Also I am still going to be pumping 500 gph of air through the stones into each plant pots.
    Is this somthing that will work and how should I build the top feed do I just run it over the clay pebbles I am not real sure how this part should be done.
    Thanks
    It's 4:19 u got a minute?

    #2
    so basically you want to build something like this with a top feed line instead of the water jet nozzle things these guys use?

    From a design developed by member Saibot I built a fairly elaborate 4 bucket RDWC system with an external reservoir using ¾" inlet (pump) and 1.5" return (drain) lines along with a 1000 gph water pump. Saibots manifold design has several failsafe's built in to eliminate almost every chance of...


    This a quick visual list of the things I am using. I plan to keep this updated until this build is complete. Explanations/Testings and such will be carried out throughout the thread as they come up. This is the tote I am using. Inside of tote. Tote with hole cut for Net Pot...
    From a design developed by member Saibot I built a fairly elaborate 4 bucket RDWC system with an external reservoir using ¾” inlet (pump) and 1.5” return (drain) lines along with a 1000 gph water pump
    Completed auto grows 3

    2x4 Gorilla tent
    600W HPS
    Coco
    GH Flora Series trio + Armor Si, CALiMAGic, RapidStart, Liquid KoolBloom, Floralicious Plus, FloraKleen, Diamond Nectar, FloraBlend, FloraNectar (Pineapple Rush version), Dry Koolbloom + Great White mycorrhizae & Terpinator

    Grows using this setup: 1
    Largest yield from this setup: 20oz / 567g

    Previous grows:
    http://forum.growweedeasy.com/forum/...row-first-grow
    http://forum.growweedeasy.com/forum/...world-of-seeds

    Comment


      #3
      Cheers mate yea That's what I want to do
      It's 4:19 u got a minute?

      Comment


        #4
        Also how much under the net pot would be an optimal water line I right now fill to just under the net pot it works out to an even 10 liters and in 7 days it's got about 4 inches in the bottom left. But with this new system I will have another 20 liters so I shouldn't lose fluid so fast.
        It's 4:19 u got a minute?

        Comment


        • OzBud
          OzBud commented
          Editing a comment
          I've never grown hydro but yeah I think just below the net pots is good.

          How big is your tent?
          With the new system, are you going to have your res in the tent or externally?

        • Burny
          Burny commented
          Editing a comment
          After my roots will reach the reservoir I lower the water level until there is about a two inch gap between the bottom of the net pot and my water. Most people that grow in hydro do. The water level is usually left up higher closer to the bottom of the net pot in the beginning so when the air bubbles pop it keeps the medium and seedlings wet.
          Last edited by Burny; 06-15-2017, 03:04 AM.

        #5
        2 x 4 I am going to have it outside the tent so I can check the pH and levels at lights out
        It's 4:19 u got a minute?

        Comment


          #6
          Yeah good idea. Will help keep the water temp a bit cooler as well.
          Completed auto grows 3

          2x4 Gorilla tent
          600W HPS
          Coco
          GH Flora Series trio + Armor Si, CALiMAGic, RapidStart, Liquid KoolBloom, Floralicious Plus, FloraKleen, Diamond Nectar, FloraBlend, FloraNectar (Pineapple Rush version), Dry Koolbloom + Great White mycorrhizae & Terpinator

          Grows using this setup: 1
          Largest yield from this setup: 20oz / 567g

          Previous grows:
          http://forum.growweedeasy.com/forum/...row-first-grow
          http://forum.growweedeasy.com/forum/...world-of-seeds

          Comment


            #7
            Done that was a mission the building took me about 2 hrs as I was on cruse mode and of corse everything I make my 3 yr old daughter helps with so much fun.
            It took me 2 days and 3 states to get the parts done found an awsome Hydroponic store in Massachusetts that was very professional and had everything I needed. Man hydroponic stores are a trip but that's another post I am happy with my system I built and I'll post pictures installed later tonight lights on after 630.
            It's 4:19 u got a minute?

            Comment


            • Formernuke
              Formernuke commented
              Editing a comment
              What's the name and where is the hydro store you found

            #8
            I don't want to promote but it was hgt supply they have a few locations I was happy to drive the hr and a half to get there they had it all. Nice clean store
            It's 4:19 u got a minute?

            Comment


              #9
              Done no leaks I am super happy
              It's 4:19 u got a minute?

              Comment

              Check out our new growing community forum! (still in beta)

              Subscribe to Weekly Newsletter!

              Working...
              X