bobsakamoto
New member
I am interested, VERY, Soilscience ...if you have the time/energy for sharing what you learned.
Last edited:
GrowWeedEasy.com
You're browsing as a guest. Sign up to join the conversation, share your grows, and get help from thousands of fellow growers — it's free and takes less than a minute.
LEDs
- Thread starter sydnasty
- Start date
Minnesotabrandon
New member
white widow
dontknownuttin
New member
Installing a LED Retrofit for Metal Halide or High Pressure Sodium
tyler_ hobbyist
New member
tyler_ hobbyist
New member
If you use led lights do not put them close at 9inchs with a 200w actual draw 24/0 I gave my plants a small case of light burn after 4-5days the hand heat test doesn't work with leds I moved mine to 11inchs and they seem fine so far trial and error
tyler_ hobbyist
New member
There was more lights around the plants but not directly on them
tyler_ hobbyist
New member
Soilscience
New member
Sorry to drop out for a bit #bobsakamoto Here's the shopping list for the light I'm building as a prototype to hang at local garden shop.
3 Vero29s BXRC E3510K0-C-73SE, the C is a very important letter. The gen7s are B,C,Or D. Each group operates in different current and voltage ranges.
1 Meanwell HLG 320H C1400B
3 Mechatronix Giga 15250 heat sinks which come pretapped for Vero29s.
You'll need some framing materials, a cord, a switch, a dimmer (potentiometer), and for about 300 bucks you'll out perform a 315LEC with 50% more light and about 290 watts total usage.
I get the cobs from Digi-Key. The driver from Arrow. The heat sinks from CSI
The heat sinks are currently sold out world wide. I'm subbing with Mega 134100s which will add about 20 bucks to the build.
Go to the manufacturers web sites and read,read,read. It's all there.
If you go ahead with it, we could probably exchange emails or something.
3 Vero29s
3 Vero29s BXRC E3510K0-C-73SE, the C is a very important letter. The gen7s are B,C,Or D. Each group operates in different current and voltage ranges.
1 Meanwell HLG 320H C1400B
3 Mechatronix Giga 15250 heat sinks which come pretapped for Vero29s.
You'll need some framing materials, a cord, a switch, a dimmer (potentiometer), and for about 300 bucks you'll out perform a 315LEC with 50% more light and about 290 watts total usage.
I get the cobs from Digi-Key. The driver from Arrow. The heat sinks from CSI
The heat sinks are currently sold out world wide. I'm subbing with Mega 134100s which will add about 20 bucks to the build.
Go to the manufacturers web sites and read,read,read. It's all there.
If you go ahead with it, we could probably exchange emails or something.
3 Vero29s